diff --git a/print/QUALITY - 0.20mm - MK3 Parts.ini b/print/QUALITY - 0.20mm - MK3 Parts.ini
index e27664b..6c554ac 100644
--- a/print/QUALITY - 0.20mm - MK3 Parts.ini	
+++ b/print/QUALITY - 0.20mm - MK3 Parts.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+linux-x64-GTK3 on 2021-03-22 at 21:29:27 UTC
+# generated by PrusaSlicer 2.5.2+linux-x64-GTK3 on 2023-04-21 at 18:02:31 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -7,17 +7,20 @@ bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 1000
-dont_support_bridges = 1
-draft_shield = 0
+dont_support_bridges = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
+external_perimeter_acceleration = 0
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 25
 external_perimeters_first = 0
@@ -28,16 +31,24 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 1
 gcode_label_objects = 1
+gcode_resolution = 0.0125
+gcode_substitutions = 
 infill_acceleration = 1000
-infill_anchor = 600%
-infill_anchor_max = 50
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -54,29 +65,41 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-overhangs = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{printing_filament_types}_{printer_model}_{print_time}.gcode
+overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
 perimeter_speed = 45
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.2
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_position = nearest
+seam_position = aligned
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
-skirts = 0
+skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
+solid_infill_acceleration = 0
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -87,33 +110,46 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.1
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
-support_material_xy_spacing = 50%
+support_material_xy_spacing = 60%
+thick_bridges = 0
 thin_walls = 0
 threads = 24
-top_fill_pattern = monotonic
+top_fill_pattern = monotoniclines
 top_infill_extrusion_width = 0.4
+top_solid_infill_acceleration = 0
 top_solid_infill_speed = 40
-top_solid_layers = 5
-top_solid_min_thickness = 0.6
+top_solid_layers = 6
+top_solid_min_thickness = 0.7
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60