diff --git a/filament/Fiberlogy - Fiber Wood.ini b/filament/Fiberlogy - FiberWood.ini
similarity index 88%
rename from filament/Fiberlogy - Fiber Wood.ini
rename to filament/Fiberlogy - FiberWood.ini
index 0da7f65..2d58d6a 100644
--- a/filament/Fiberlogy - Fiber Wood.ini	
+++ b/filament/Fiberlogy - FiberWood.ini	
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.4.2+linux-x64-GTK3 on 2022-07-30 at 10:32:52 UTC
+# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2023-01-08 at 02:09:23 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -8,7 +8,7 @@ compatible_prints_condition =
 cooling = 1
 disable_fan_first_layers = 1
 end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 0.9
+extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
 filament_colour = #B59B83
@@ -16,13 +16,13 @@ filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cost = 172
-filament_density = 1.4
+filament_density = 1.23
 filament_deretract_speed = nil
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 40
+filament_max_volumetric_speed = 8
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -34,10 +34,10 @@ filament_retract_lift = nil
 filament_retract_lift_above = nil
 filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
-filament_retract_speed = 45
+filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
-filament_spool_weight = 230
+filament_spool_weight = 330
 filament_toolchange_delay = 0
 filament_type = WOOD
 filament_unload_time = 0
@@ -46,7 +46,7 @@ filament_unloading_speed_start = 100
 filament_vendor = Made for Prusa
 filament_wipe = nil
 first_layer_bed_temperature = 60
-first_layer_temperature = 210
+first_layer_temperature = 185
 full_fan_speed_layer = 4
 inherits = Prusa PLA
 max_fan_speed = 100
@@ -54,4 +54,4 @@ min_fan_speed = 75
 min_print_speed = 60
 slowdown_below_layer_time = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0"
-temperature = 210
+temperature = 185
diff --git a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S Single_.ini b/printer/Original Prusa i3 MK3S & MK3S+ MMU2S Single_.ini
deleted file mode 100644
index 39fd1dd..0000000
--- a/printer/Original Prusa i3 MK3S & MK3S+ MMU2S Single_.ini	
+++ /dev/null
@@ -1,78 +0,0 @@
-# generated by PrusaSlicer 2.4.0+linux-x64-GTK3 on 2022-02-08 at 11:02:23 UTC
-bed_custom_model = 
-bed_custom_texture = 
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
-between_objects_gcode = 
-color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
-cooling_tube_length = 20
-cooling_tube_retraction = 40
-default_filament_profile = "Prusament PLA"
-default_print_profile = 0.15mm QUALITY @MK3
-deretract_speed = 0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
-extra_loading_move = -25
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-machine_limits_usage = emit_to_gcode
-machine_max_acceleration_e = 5000,5000
-machine_max_acceleration_extruding = 1250,1250
-machine_max_acceleration_retracting = 1250,1250
-machine_max_acceleration_travel = 1500,1250
-machine_max_acceleration_x = 1000,960
-machine_max_acceleration_y = 1000,960
-machine_max_acceleration_z = 200,200
-machine_max_feedrate_e = 120,120
-machine_max_feedrate_x = 200,100
-machine_max_feedrate_y = 200,100
-machine_max_feedrate_z = 12,12
-machine_max_jerk_e = 4.5,4.5
-machine_max_jerk_x = 8,8
-machine_max_jerk_y = 8,8
-machine_max_jerk_z = 0.4,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0.25
-max_print_height = 210
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-parking_pos_retraction = 85
-pause_print_gcode = M601
-print_host = 
-printer_model = MK3SMMU2S
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
-printer_settings_id = 
-printer_technology = FFF
-printer_variant = 0.4
-printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 1
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 0
-retract_lift = 0.4
-retract_lift_above = 0
-retract_lift_below = 209
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-silent_mode = 1
-single_extruder_multi_material = 0
-start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
-template_custom_gcode = 
-thumbnails = 16x16,220x124
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0