# generated by PrusaSlicer 2.7.4+linux-x64-GTK3 on 2024-07-20 at 13:54:43 UTC
autoemit_temperature_commands = 1
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
binary_gcode = 1
color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = "Prusament PLA @PG"
default_print_profile = 0.20mm QUALITY @MK4 0.4
deretract_speed = 25
end_gcode = M17 ; enable steppers\\nM862.3 P "[printer_model]" ; printer model check\\nM862.1 P[nozzle_diameter] ; nozzle diameter check\\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\\n\\nG90 ; use absolute coordinates\\nM83 ; extruder relative mode\\n\\nM140 S[first_layer_bed_temperature] ; set bed temp\\n{if filament_type[initial_tool]=="PC" or filament_type[initial_tool]=="NYLON"}\\nM104 S{first_layer_temperature[initial_tool]-25} ; set extruder temp for bed leveling\\nM109 R{first_layer_temperature[initial_tool]-25} ; wait for temp\\n{elsif filament_type[initial_tool]=="FLEX"}\\nM104 S210 ; set extruder temp for bed leveling\\nM109 R210 ; wait for temp\\n{else}\\nM104 S170 ; set extruder temp for bed leveling\\nM109 R170 ; wait for temp\\n{endif}\\n\\nM84 E ; turn off E motor\\n\\nG28 ; home all without mesh bed level\\n\\n; probe to clean the nozzle\\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)+32} Y{((first_layer_print_min[1]) - 4)} Z{5} F4800\\n\\nM302 S160 ; lower cold extrusion limit to 160C\\n\\n{if filament_type[initial_tool]=="FLEX"}\\nG1 E-4 F2400 ; retraction\\n{else}\\nG1 E-2 F2400 ; retraction\\n{endif}\\n\\nM84 E ; turn off E motor\\n\\nG29 P9 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{32} H{4}\\n\\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\\n\\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} Z{40} F10000\\n\\nM190 S[first_layer_bed_temperature] ; wait for bed temp\\n\\nM107\\n\\n;\\n; MBL\\n;\\nM84 E ; turn off E motor\\nG29 ; mesh bed leveling\\nM104 S[first_layer_temperature] ; set extruder temp\\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5} Z{30} F4800\\n\\nM109 S[first_layer_temperature] ; wait for extruder temp\\nG1 Z0.2 F720\\nG92 E0\\n\\nM569 S0 E ; set spreadcycle mode for extruder\\n\\n;\\n; Extrude purge line\\n;\\n{if filament_type[initial_tool]=="FLEX"}\\nG1 E4 F2400 ; deretraction\\n{else}\\nG1 E2 F2400 ; deretraction\\n{endif}\\n\\n; move right\\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) + 32} E{32 * 0.15} F1000\\n; move down\\nG1 Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5 - 1.5} E{1.5 * 0.15} F1000\\n; move left\\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} E{32 * 0.30} F800\\n\\nG92 E0\\nM221 S100 ; set flow to 100%
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin2
high_current_on_filament_swap = 0
host_type = prusalink
inherits = Original Prusa MK4 0.4 nozzle
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 2500,2500
machine_max_acceleration_extruding = 2000,2000
machine_max_acceleration_retracting = 1200,1200
machine_max_acceleration_travel = 2000,2000
machine_max_acceleration_x = 2500,2500
machine_max_acceleration_y = 2500,2500
machine_max_acceleration_z = 200,200
machine_max_feedrate_e = 100,100
machine_max_feedrate_x = 200,160
machine_max_feedrate_y = 200,160
machine_max_feedrate_z = 40,40
machine_max_jerk_e = 10,10
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 2,2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.3
max_print_height = 220
min_layer_height = 0.07
multimaterial_purging = 140
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = MK4
printer_notes = Do not remove the keywords below.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK4\nPG
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 1.5
retract_before_wipe = 80%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 0
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 219
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
silent_mode = 1
single_extruder_multi_material = 0
start_gcode = M17 ; enable steppers\nM862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))}\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\n{if filament_type[initial_tool]=="PC" or filament_type[initial_tool]=="NYLON"}\nM104 S{first_layer_temperature[initial_tool]-25} ; set extruder temp for bed leveling\nM109 R{first_layer_temperature[initial_tool]-25} ; wait for temp\n{elsif filament_type[initial_tool]=="FLEX"}\nM104 S210 ; set extruder temp for bed leveling\nM109 R210 ; wait for temp\n{else}\nM104 S170 ; set extruder temp for bed leveling\nM109 R170 ; wait for temp\n{endif}\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\n; probe to clean the nozzle\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)+32} Y{((first_layer_print_min[1]) - 4)} Z{5} F4800\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]=="FLEX"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\nG29 P9 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{32} H{4}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S100{endif}\n\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} Z{40} F10000\n\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\nM107\n\n;\n; MBL\n;\nM84 E ; turn off E motor\nG29 ; mesh bed leveling\nM104 S[first_layer_temperature] ; set extruder temp\nG0 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5} Z{30} F4800\n\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.2 F720\nG92 E0\n\nM569 S0 E ; set spreadcycle mode for extruder\n\n;\n; Extrude purge line\n;\n{if filament_type[initial_tool]=="FLEX"}\nG1 E4 F2400 ; deretraction\n{else}\nG1 E2 F2400 ; deretraction\n{endif}\n\n; move right\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32) + 32} E{32 * 0.15} F1000\n; move down\nG1 Y{(max(0, first_layer_print_min[1]) - 4) + 4 - 4.5 - 1.5} E{1.5 * 0.15} F1000\n; move left\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} E{32 * 0.30} F800\n\nG92 E0\nM221 S100 ; set flow to 100%
template_custom_gcode = 
thumbnails = 16x16/QOI, 313x173/QOI, 440x240/QOI, 480x240/QOI, 640x480/PNG
thumbnails_format = PNG
toolchange_gcode = 
travel_lift_before_obstacle = 0
travel_max_lift = 1.5
travel_ramping_lift = 1
travel_slope = 1
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0