# generated by PrusaSlicer 2.7.1+linux-x64-GTK3 on 2024-01-28 at 22:24:38 UTC
autoemit_temperature_commands = 0
bed_custom_model = /home/pgrondek/Downloads/kodak/kodak-bed-v2.stl
bed_custom_texture = /home/pgrondek/Downloads/kodak/texture.png
bed_shape = -40x-10,220x-10,220x220,-40x220
before_layer_gcode = 
between_objects_gcode = 
binary_gcode = 0
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = 
default_print_profile = 
deretract_speed = 0,0
end_gcode = G1 Z{min(max_layer_z+49, max_print_height)} E-30 F720\n; park\nG28 X Y\n\nM104 T0 S0\nM104 T1 S0\nM140 S0
extra_loading_move = -2
extruder_colour = #62A0EA;#8FF0A4
extruder_offset = 0x0,0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = prusalink
inherits = 
layer_gcode = 
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 10000,5000
machine_max_acceleration_extruding = 5500,5500
machine_max_acceleration_retracting = 5500,5500
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 5500,5500
machine_max_acceleration_y = 5500,5500
machine_max_acceleration_z = 50,50
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,200
machine_max_feedrate_y = 200,200
machine_max_feedrate_z = 30,30
machine_max_jerk_e = 0,0
machine_max_jerk_x = 0,0
machine_max_jerk_y = 0,0
machine_max_jerk_z = 0,0
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0,0
max_print_height = 225
min_layer_height = 0.07,0.07
nozzle_diameter = 0.4,0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = 
printer_notes = 
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 2,2
retract_before_wipe = 0%,0%
retract_layer_change = 0,0
retract_length = 2,2
retract_length_toolchange = 10,10
retract_lift = 0,0
retract_lift_above = 0,0
retract_lift_below = 0,0
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 40,40
silent_mode = 1
single_extruder_multi_material = 0
start_gcode = PRINT_START T0_USED={ is_extruder_used[0] } T1_USED={ is_extruder_used[1] } T0_TARGET_TEMPERATURE={ first_layer_temperature[0] } T1_TARGET_TEMPERATURE={ first_layer_temperature[1] } BED_TEMPERATURE=[first_layer_bed_temperature]
template_custom_gcode = 
thumbnails = 640x360/PNG
thumbnails_format = PNG
toolchange_gcode = ; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n\nM117 tool change [previous_extruder] -> [next_extruder]\n\n; moving up\nG1 Z{layer_z + 5} F5000\n\nT{next_extruder} HOT=1 RETRACT=1\n\n{if layer_num == 0 }\nM109 T{next_extruder} S{first_layer_temperature[next_extruder]}\n{else}\nM109 T{next_extruder} S{temperature[next_extruder]}\n{endif}\n\n; moving back down\nG1 Z{layer_z}\n
travel_lift_before_obstacle = 0,0
travel_max_lift = 0,0
travel_ramping_lift = 0,0
travel_slope = 0,0
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0,0
z_offset = 0