mirror of
https://github.com/pgrondek/prusa-slicer-profiles.git
synced 2024-11-27 06:24:30 +00:00
78 lines
3.5 KiB
INI
78 lines
3.5 KiB
INI
# generated by PrusaSlicer 2.3.3+linux-x64-GTK3 on 2021-12-21 at 20:27:44 UTC
|
|
bed_custom_model =
|
|
bed_custom_texture =
|
|
bed_shape = 0x0,250x0,250x210,0x210
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
default_filament_profile = "Prusament PLA"
|
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
|
|
deretract_speed = 0
|
|
end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\n; M104 S0 ; turn off temperature\n; M140 S0 ; turn off heatbed\n; M107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n; G1 X0 Y200 F3000 ; home X axis\nG1 X125 Y200 F3000 ; Move print head to middle and print bed to front\nG1 Z10 F3000 ; Move print head down\nG1 Y0 F3000 ; Move print bed to back\nG1 Y200 F3000 ; Move print bed to back\nM84 ; disable motors
|
|
extra_loading_move = -2
|
|
extruder_colour = ""
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
high_current_on_filament_swap = 0
|
|
host_type = octoprint
|
|
inherits = Original Prusa i3 MK3S & MK3S+ 0.6 nozzle
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
machine_limits_usage = emit_to_gcode
|
|
machine_max_acceleration_e = 5000,5000
|
|
machine_max_acceleration_extruding = 1250,1250
|
|
machine_max_acceleration_retracting = 1250,1250
|
|
machine_max_acceleration_x = 1000,960
|
|
machine_max_acceleration_y = 1000,960
|
|
machine_max_acceleration_z = 200,200
|
|
machine_max_feedrate_e = 120,120
|
|
machine_max_feedrate_x = 200,100
|
|
machine_max_feedrate_y = 200,100
|
|
machine_max_feedrate_z = 12,12
|
|
machine_max_jerk_e = 4.5,4.5
|
|
machine_max_jerk_x = 8,8
|
|
machine_max_jerk_y = 8,8
|
|
machine_max_jerk_z = 0.4,0.4
|
|
machine_min_extruding_rate = 0,0
|
|
machine_min_travel_rate = 0,0
|
|
max_layer_height = 0.4
|
|
max_print_height = 210
|
|
min_layer_height = 0.15
|
|
nozzle_diameter = 0.6
|
|
parking_pos_retraction = 92
|
|
pause_print_gcode = M601
|
|
print_host =
|
|
printer_model = MK3S
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
|
printer_settings_id =
|
|
printer_technology = FFF
|
|
printer_variant = 0.6
|
|
printer_vendor =
|
|
printhost_apikey =
|
|
printhost_cafile =
|
|
remaining_times = 1
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 0.8
|
|
retract_length_toolchange = 4
|
|
retract_lift = 0.4
|
|
retract_lift_above = 0
|
|
retract_lift_below = 209
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 35
|
|
silent_mode = 1
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling
|
|
template_custom_gcode =
|
|
thumbnails =
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|