mirror of
https://github.com/pgrondek/prusa-slicer-profiles.git
synced 2024-12-03 08:34:36 +00:00
80 lines
4.0 KiB
INI
80 lines
4.0 KiB
INI
# generated by PrusaSlicer 2.5.0+linux-x64-GTK3 on 2022-12-14 at 16:48:36 UTC
|
|
bed_custom_model =
|
|
bed_custom_texture =
|
|
bed_shape = 0x0,250x0,250x210,0x210
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
color_change_gcode = M600\nG1 E0.4 F1500 ; prime after color change
|
|
cooling_tube_length = 5
|
|
cooling_tube_retraction = 91.5
|
|
default_filament_profile = "Prusament PLA"
|
|
default_print_profile = 0.15mm QUALITY @MK3
|
|
deretract_speed = 0
|
|
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM107 ; turn off fan\n\n; Cleaning bed\nG1 X125 Y210 F3000 ; Move print head to middle and print bed to front\nG1 Z10 F3000 ; Move print head down\nG1 Y0 F3000 ; Move print bed to back\nG1 Y210 F3000 ; Move print bed to front\nM84 ; disable motors
|
|
extra_loading_move = -2
|
|
extruder_colour = ""
|
|
extruder_offset = 0x0
|
|
gcode_flavor = marlin
|
|
high_current_on_filament_swap = 0
|
|
host_type = octoprint
|
|
inherits = Original Prusa i3 MK3S & MK3S+
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
machine_limits_usage = emit_to_gcode
|
|
machine_max_acceleration_e = 5000,5000
|
|
machine_max_acceleration_extruding = 1250,1250
|
|
machine_max_acceleration_retracting = 1250,1250
|
|
machine_max_acceleration_travel = 1500,1250
|
|
machine_max_acceleration_x = 1000,960
|
|
machine_max_acceleration_y = 1000,960
|
|
machine_max_acceleration_z = 200,200
|
|
machine_max_feedrate_e = 120,120
|
|
machine_max_feedrate_x = 200,100
|
|
machine_max_feedrate_y = 200,100
|
|
machine_max_feedrate_z = 12,12
|
|
machine_max_jerk_e = 4.5,4.5
|
|
machine_max_jerk_x = 8,8
|
|
machine_max_jerk_y = 8,8
|
|
machine_max_jerk_z = 0.4,0.4
|
|
machine_min_extruding_rate = 0,0
|
|
machine_min_travel_rate = 0,0
|
|
max_layer_height = 0.25
|
|
max_print_height = 210
|
|
min_layer_height = 0.07
|
|
nozzle_diameter = 0.4
|
|
parking_pos_retraction = 92
|
|
pause_print_gcode = M601
|
|
print_host =
|
|
printer_model = MK3S
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
|
|
printer_settings_id =
|
|
printer_technology = FFF
|
|
printer_variant = 0.4
|
|
printer_vendor =
|
|
printhost_apikey =
|
|
printhost_cafile =
|
|
remaining_times = 1
|
|
retract_before_travel = 1
|
|
retract_before_wipe = 0%
|
|
retract_layer_change = 1
|
|
retract_length = 0.8
|
|
retract_length_toolchange = 4
|
|
retract_lift = 0.4
|
|
retract_lift_above = 0
|
|
retract_lift_below = 209
|
|
retract_restart_extra = 0
|
|
retract_restart_extra_toolchange = 0
|
|
retract_speed = 35
|
|
silent_mode = 1
|
|
single_extruder_multi_material = 0
|
|
start_gcode = M862.3 P "[printer_model]" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\n; M115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; No intro line\nG1 Z0.3 F720\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\nG1 Z0.2 F720\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
|
|
template_custom_gcode =
|
|
thumbnails = 160x120
|
|
thumbnails_format = PNG
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 1
|
|
wipe = 1
|
|
z_offset = 0
|