Added new filament DevilDesign ECO PLA 1.75

filament/DevilDesign ECO PLA 1.75.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.0 on 2019-01-01 22:08:55
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #646464
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 230
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 230

print/0.3 mm layer height 30 mmps.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 21:46:42
+# generated by Slic3r 1.3.0 on 2019-01-01 22:09:01
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -73,7 +73,7 @@ solid_infill_extrusion_width = 0
 solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 1
+support_material = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.2

slic3r.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on Fri Dec 28 01:19:24 2018
+# generated by Slic3r 1.3.0 on Wed Jan  2 00:11:16 2019
 autoalignz = 1
 autocenter = 1
 background_processing = 0
@@ -25,8 +25,8 @@ start = 1
 
 [presets]
 filament = 3DActive PLA 1.75
-print = 0.1 mm layer height solid
+print = 0.3 mm layer height
-printer = Tevo Tarantula 0.2 mm OctoPi
+printer = Tevo Tarantula 0.4 mm OctoPi
 
 [recent]
 skein_directory = /home/pgrondek/3D/Things