diff --git a/print/1.0 Nozzle.ini b/print/1.0 Nozzle.ini new file mode 100644 index 0000000..c736900 --- /dev/null +++ b/print/1.0 Nozzle.ini @@ -0,0 +1,99 @@ +# generated by Slic3r 1.3.0 on 2018-12-20 23:30:06 +adaptive_slicing = 0 +adaptive_slicing_quality = 75% +avoid_crossing_perimeters = 0 +bottom_infill_pattern = rectilinear +bottom_solid_layers = 2 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_connections_width = 0 +brim_width = 0 +compatible_printers = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 20% +fill_gaps = 1 +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.15 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 55% +infill_speed = 80 +interface_shells = 0 +interior_brim_width = 0 +layer_height = 0.8 +match_horizontal_surfaces = 0 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 40 +perimeters = 4 +post_process = +print_settings_id = +raft_layers = 0 +regions_overlap = 0 +resolution = 0 +seam_position = aligned +shortcuts = support_material +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_extrusion_width = 0 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_max_layers = 0 +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 10% +thin_walls = 1 +top_infill_extrusion_width = 0 +top_infill_pattern = rectilinear +top_solid_infill_speed = 15 +top_solid_layers = 4 +travel_speed = 130 +xy_size_compensation = 0 diff --git a/printer/Tevo Tarantula 1.ini b/printer/Tevo Tarantula 1.ini new file mode 100644 index 0000000..a2791fa --- /dev/null +++ b/printer/Tevo Tarantula 1.ini @@ -0,0 +1,41 @@ +# generated by Slic3r 1.3.0 on 2018-12-26 22:28:08 +bed_shape = 0x0,200x0,200x200,0x200 +before_layer_gcode = +between_objects_gcode = +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n +extruder_offset = 0x0 +gcode_flavor = reprap +has_heatbed = 1 +host_type = octoprint +layer_gcode = +max_layer_height = 0.3 +min_layer_height = 0.15 +nozzle_diameter = 1 +octoprint_apikey = +pressure_advance = 0 +print_host = +printer_notes = +printer_settings_id = +retract_before_travel = 2 +retract_layer_change = 0 +retract_length = 2 +retract_length_toolchange = 10 +retract_lift = 0.5 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +serial_port = +serial_speed = 250000 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_set_and_wait_bed = 0 +use_set_and_wait_extruder = 0 +use_volumetric_e = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 2 +z_steps_per_mm = 0