Plit settings cleanup

print/Default.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2018-12-06 07:21:46
+# generated by Slic3r 1.3.0 on 2018-12-13 22:58:55
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -74,7 +74,7 @@ solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 1
-support_material_angle = 10
+support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
@@ -82,14 +82,12 @@ support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_extrusion_width = 0
-support_material_interface_layers = 1
+support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_max_layers = 0
 support_material_pattern = rectilinear-grid
-support_material_pillar_size = 2.5
+support_material_spacing = 2.5
-support_material_pillar_spacing = 5
-support_material_spacing = 5
 support_material_speed = 60
 support_material_threshold = 10%
 thin_walls = 1

print/My Settings 2.ini

@@ -1,101 +0,0 @@
-# generated by Slic3r 1.3.1-dev on 2018-12-02 21:27:57
-adaptive_slicing = 0
-adaptive_slicing_quality = 75%
-avoid_crossing_perimeters = 0
-bottom_infill_pattern = rectilinear
-bottom_solid_layers = 2
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_connections_width = 0
-brim_width = 0
-compatible_printers = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 20%
-fill_gaps = 1
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.4
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 55%
-infill_speed = 80
-interface_shells = 0
-interior_brim_width = 0
-layer_height = 0.3
-match_horizontal_surfaces = 0
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 60
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-regions_overlap = 0
-resolution = 0
-seam_position = aligned
-shortcuts = support_material
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 10
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_extrusion_width = 0
-support_material_interface_layers = 1
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_max_layers = 0
-support_material_pattern = pillars
-support_material_pillar_size = 2.5
-support_material_pillar_spacing = 5
-support_material_spacing = 5
-support_material_speed = 60
-support_material_threshold = 10%
-thin_walls = 1
-top_infill_extrusion_width = 0
-top_infill_pattern = rectilinear
-top_solid_infill_speed = 15
-top_solid_layers = 4
-travel_speed = 130
-xy_size_compensation = 0

print/My Settings.ini

@@ -1,101 +0,0 @@
-# generated by Slic3r 1.3.1-dev on 2018-10-15 19:02:39
-adaptive_slicing = 0
-adaptive_slicing_quality = 75%
-avoid_crossing_perimeters = 0
-bottom_infill_pattern = rectilinear
-bottom_solid_layers = 2
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_connections_width = 0
-brim_width = 0
-compatible_printers = 
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 20%
-fill_gaps = 1
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.4
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 55%
-infill_speed = 80
-interface_shells = 0
-interior_brim_width = 0
-layer_height = 0.3
-match_horizontal_surfaces = 0
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 60
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-regions_overlap = 0
-resolution = 0
-seam_position = aligned
-shortcuts = support_material
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_extrusion_width = 0
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_max_layers = 0
-support_material_pattern = rectilinear
-support_material_pillar_size = 2.5
-support_material_pillar_spacing = 10
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_threshold = 2
-thin_walls = 1
-top_infill_extrusion_width = 0
-top_infill_pattern = rectilinear
-top_solid_infill_speed = 15
-top_solid_layers = 4
-travel_speed = 130
-xy_size_compensation = 0

print/Slow.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.1-dev on 2018-10-14 13:10:24
+# generated by Slic3r 1.3.0 on 2018-12-13 22:58:09
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -73,7 +73,7 @@ solid_infill_extrusion_width = 0
 solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
@@ -86,12 +86,10 @@ support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_max_layers = 0
-support_material_pattern = pillars
+support_material_pattern = rectilinear-grid
-support_material_pillar_size = 2.5
-support_material_pillar_spacing = 10
 support_material_spacing = 2.5
 support_material_speed = 60
-support_material_threshold = 60%
+support_material_threshold = 10%
 thin_walls = 1
 top_infill_extrusion_width = 0
 top_infill_pattern = rectilinear

slic3r.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on Thu Dec 13 23:54:54 2018
+# generated by Slic3r 1.3.0 on Thu Dec 13 23:59:18 2018
 autoalignz = 1
 autocenter = 1
 background_processing = 0