diff --git a/print/0.2 Nozzle no-infill.ini b/print/0.2 Nozzle no-infill.ini new file mode 100644 index 0000000..a1669df --- /dev/null +++ b/print/0.2 Nozzle no-infill.ini @@ -0,0 +1,99 @@ +# generated by Slic3r 1.3.0 on 2018-12-19 20:38:37 +adaptive_slicing = 0 +adaptive_slicing_quality = 75% +avoid_crossing_perimeters = 0 +bottom_infill_pattern = rectilinear +bottom_solid_layers = 2 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_connections_width = 0 +brim_width = 0 +compatible_printers = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 0% +fill_gaps = 1 +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.15 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 55% +infill_speed = 80 +interface_shells = 0 +interior_brim_width = 0 +layer_height = 0.1 +match_horizontal_surfaces = 0 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 40 +perimeters = 5 +post_process = +print_settings_id = +raft_layers = 0 +regions_overlap = 0 +resolution = 0 +seam_position = aligned +shortcuts = support_material +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_extrusion_width = 0 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_max_layers = 0 +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 10% +thin_walls = 1 +top_infill_extrusion_width = 0 +top_infill_pattern = rectilinear +top_solid_infill_speed = 15 +top_solid_layers = 4 +travel_speed = 130 +xy_size_compensation = 0 diff --git a/print/0.2 Nozzle.ini b/print/0.2 Nozzle.ini new file mode 100644 index 0000000..12c3b65 --- /dev/null +++ b/print/0.2 Nozzle.ini @@ -0,0 +1,99 @@ +# generated by Slic3r 1.3.0 on 2018-12-19 20:38:47 +adaptive_slicing = 0 +adaptive_slicing_quality = 75% +avoid_crossing_perimeters = 0 +bottom_infill_pattern = rectilinear +bottom_solid_layers = 2 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_connections_width = 0 +brim_width = 0 +compatible_printers = +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 20% +fill_gaps = 1 +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.15 +first_layer_speed = 30 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 55% +infill_speed = 80 +interface_shells = 0 +interior_brim_width = 0 +layer_height = 0.1 +match_horizontal_surfaces = 0 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 40 +perimeters = 4 +post_process = +print_settings_id = +raft_layers = 0 +regions_overlap = 0 +resolution = 0 +seam_position = aligned +shortcuts = support_material +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_extrusion_width = 0 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_max_layers = 0 +support_material_pattern = pillars +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 10% +thin_walls = 1 +top_infill_extrusion_width = 0 +top_infill_pattern = rectilinear +top_solid_infill_speed = 15 +top_solid_layers = 4 +travel_speed = 130 +xy_size_compensation = 0 diff --git a/print/Default.ini b/print/Default.ini index c7d7029..47c170d 100644 --- a/print/Default.ini +++ b/print/Default.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.3.0 on 2018-12-17 12:12:50 +# generated by Slic3r 1.3.0 on 2018-12-18 19:33:41 adaptive_slicing = 0 adaptive_slicing_quality = 75% avoid_crossing_perimeters = 0 @@ -86,7 +86,7 @@ support_material_interface_layers = 3 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_max_layers = 0 -support_material_pattern = rectilinear-grid +support_material_pattern = pillars support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 10% diff --git a/slic3r.ini b/slic3r.ini index 528cfa4..c34c4b2 100644 --- a/slic3r.ini +++ b/slic3r.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.3.0 on Tue Dec 18 19:06:35 2018 +# generated by Slic3r 1.3.0 on Wed Dec 19 21:38:55 2018 autoalignz = 1 autocenter = 1 background_processing = 0 @@ -25,7 +25,7 @@ start = 1 [presets] filament = 3DActive PLA 1.75 -print = Default +print = 0.2 Nozle no-infill printer = Tevo Tarantula OctoPi 0.2 [recent]