diff --git a/print/0.1 mm layer height 60 mmps.ini b/print/0.1 mm layer height 60 mmps.ini
index b525bb9..c83dfe4 100644
--- a/print/0.1 mm layer height 60 mmps.ini	
+++ b/print/0.1 mm layer height 60 mmps.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 21:38:29
+# generated by Slic3r 1.3.0 on 2018-12-27 21:45:28
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -23,7 +23,7 @@ extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 fill_gaps = 1
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.15
diff --git a/print/0.1 mm layer height.ini b/print/0.1 mm layer height.ini
index f3f5f0d..0932247 100644
--- a/print/0.1 mm layer height.ini	
+++ b/print/0.1 mm layer height.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 00:17:07
+# generated by Slic3r 1.3.0 on 2018-12-27 21:45:23
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -23,7 +23,7 @@ extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 fill_gaps = 1
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.15
diff --git a/print/0.3 mm layer height 10 mmps.ini b/print/0.3 mm layer height 10 mmps.ini
index 1a5a099..58b4ee9 100644
--- a/print/0.3 mm layer height 10 mmps.ini	
+++ b/print/0.3 mm layer height 10 mmps.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 00:20:20
+# generated by Slic3r 1.3.0 on 2018-12-27 21:46:37
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -23,7 +23,7 @@ extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 fill_gaps = 1
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.4
diff --git a/print/0.3 mm layer height 30 mmps.ini b/print/0.3 mm layer height 30 mmps.ini
index 7710df8..e28f56f 100644
--- a/print/0.3 mm layer height 30 mmps.ini	
+++ b/print/0.3 mm layer height 30 mmps.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 00:19:59
+# generated by Slic3r 1.3.0 on 2018-12-27 21:46:42
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -23,7 +23,7 @@ extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 fill_gaps = 1
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.4
diff --git a/print/0.3 mm layer height.ini b/print/0.3 mm layer height.ini
index 025677f..d626fb8 100644
--- a/print/0.3 mm layer height.ini	
+++ b/print/0.3 mm layer height.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 00:18:08
+# generated by Slic3r 1.3.0 on 2018-12-27 21:46:17
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -23,7 +23,7 @@ extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 fill_gaps = 1
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.4
diff --git a/print/0.8 mm layer height.ini b/print/0.8 mm layer height.ini
index 2988cac..e8eab3e 100644
--- a/print/0.8 mm layer height.ini	
+++ b/print/0.8 mm layer height.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on 2018-12-27 00:18:55
+# generated by Slic3r 1.3.0 on 2018-12-27 21:46:47
 adaptive_slicing = 0
 adaptive_slicing_quality = 75%
 avoid_crossing_perimeters = 0
@@ -23,7 +23,7 @@ extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 fill_gaps = 1
-fill_pattern = rectilinear
+fill_pattern = cubic
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.85
diff --git a/slic3r.ini b/slic3r.ini
index 17d1b71..6e1f8af 100644
--- a/slic3r.ini
+++ b/slic3r.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on Thu Dec 27 22:40:03 2018
+# generated by Slic3r 1.3.0 on Thu Dec 27 22:46:47 2018
 autoalignz = 1
 autocenter = 1
 background_processing = 0
@@ -25,7 +25,7 @@ start = 1
 
 [presets]
 filament = 3DActive PLA 1.75
-print = 0.1 mm layer height 100 infill
+print = 0.8 mm layer height
 printer = Tevo Tarantula 0.4 mm OctoPi
 
 [recent]