Added 0.2 nozzle

.gitignore

@@ -1 +1,2 @@
 printer/Tevo Tarantula OctoPi.ini
+printer/Tevo Tarantula OctoPi 0.2.ini

printer/Tevo Tarantula 0.2.ini

@@ -0,0 +1,41 @@
+# generated by Slic3r 1.3.0 on 2018-12-18 18:06:21
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
+extruder_offset = 0x0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.2
+octoprint_apikey = 
+pressure_advance = 0
+print_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 0
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0.5
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 1.5
+z_steps_per_mm = 0

slic3r.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.3.0 on Mon Dec 17 17:59:30 2018
+# generated by Slic3r 1.3.0 on Tue Dec 18 19:06:35 2018
 autoalignz = 1
 autocenter = 1
 background_processing = 0
@@ -26,7 +26,7 @@ start = 1
 [presets]
 filament = 3DActive PLA 1.75
 print = Default
-printer = Tevo Tarantula OctoPi
+printer = Tevo Tarantula OctoPi 0.2
 
 [recent]
-skein_directory = /home/pgrondek/3D/Beer storage
+skein_directory = /home/pgrondek/Downloads