tevo-tarantula-updates/Y Carriage/e3d v6.scad

$fn = 100;

//translate([4,4,0])
//    translate([11,11,0])
//        e3d_v6();

//color("red"){
//    translate([40,0,0])
//        rotate([0,-90,0])
//            fan_mount();
//}

color("green") {
    difference() {
        // part
        translate([0, 0, 0])
            cube([30, 15, 42.5]);

        // space for fan mount
        translate([40, 0, 0])
            rotate([0, - 90, 0])
                fan_mount();

        // space for extruder
        translate([4, 4, 0])
            translate([11, 11, 0])
                e3d_v6();
    }
}

module e3d_v6() {
    h0 = - 14;
    translate([- 8, - 3.5, h0])
        cube([16, 20, 12]);

    h1 = h0 + 12;
    translate([0, 0, h1])
        cylinder(d = 3, h = 2);

    h2 = h1 + 2;
    translate([0, 0, h2])
        cylinder(d = 22, h = 26);

    h3 = h2 + 26;
    translate([0, 0, h3])
        cylinder(d = 16, h = 7);

    h4 = h3 + 7;
    translate([0, 0, h4])
        cylinder(d = 12, h = 6);

    h5 = h4 + 6;
    translate([0, 0, h5])
        cylinder(d = 16, h = 3.5);

    h6 = h5 + 3.5;
    translate([0, 0, h6])
        cylinder(d = 11.5, h = 6.5, $fn = 6);
}

module fan_mount() {
    cube([30, 30, 10]);

    // screw holes
    translate([1.5 + 1.5, 1.5 + 1.5, 10])
        cylinder(d = 3, h = 5);

    translate([30 - (1.5 + 1.5), 1.5 + 1.5, 10])
        cylinder(d = 3, h = 5);

    translate([1.5 + 1.5, 30 - (1.5 + 1.5), 10])
        cylinder(d = 3, h = 5);

    translate([30 - (1.5 + 1.5), 30 - (1.5 + 1.5), 10])
        cylinder(d = 3, h = 5);

    // fan duct
    translate([1, 1, 0])
        translate([14, 14, 0])
            cylinder(d1 = 28, d2 = 22, h = 25);
}

module screw_mounts() {
    translate([1.5, 24, 29])
        rotate([90, 0, 0])
            screw_mount(length = 17, nut_size = 6, screw_size = 3, nut = "square");

    translate([25.5, 24, 29])
        rotate([90, 0, 0])
            screw_mount(length = 17, nut_size = 6, screw_size = 3, nut = "square");

    translate([2, 15, 35])
        rotate([90, 0, 0])
            screw_mount(length = 20, nut_size = 6, screw_size = 3, nut = "none");

    translate([25, 15, 35])
        rotate([90, 0, 0])
            screw_mount(length = 20, nut_size = 6, screw_size = 3, nut = "none");
}

module screw_mount(length, nut_size, screw_size, nut = "none") {
    translate([screw_size / 2, screw_size / 2, 0]) {
        cylinder(d = screw_size + 3, h = screw_size);
        cylinder(d = screw_size, h = length);
        if (nut == "hexagon") {
            translate([0, 0, length - 3])
                cylinder(d = nut_size, h = 3, $fn = 6);
        } else if (nut == "square") {
            translate([- nut_size / 2, - nut_size / 2, length - 3])
                cube([nut_size, nut_size, 3]);
        }
    }
}