# i3 config file (v4)
#
# Please see https://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
#font pango:monospace 24

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
font pango:DejaVu Sans Mono 12

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn't scale on retina/hidpi displays.

# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
set $up l
set $down k
set $left j
set $right semicolon

# use Mouse+Mod4 to drag floating windows to their wanted position
floating_modifier Mod4

# start a terminal
bindsym Mod4+Return exec i3-sensible-terminal

# kill focused window
bindsym Mod4+Shift+q kill

# start dmenu (a program launcher)
bindsym Mod4+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym Mod4+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym Mod4+$left focus left
bindsym Mod4+$down focus down
bindsym Mod4+$up focus up
bindsym Mod4+$right focus right

# alternatively, you can use the cursor keys:
bindsym Mod4+Left focus left
bindsym Mod4+Down focus down
bindsym Mod4+Up focus up
bindsym Mod4+Right focus right

# move focused window
bindsym Mod4+Shift+$left move left
bindsym Mod4+Shift+$down move down
bindsym Mod4+Shift+$up move up
bindsym Mod4+Shift+$right move right

# alternatively, you can use the cursor keys:
bindsym Mod4+Shift+Left move left
bindsym Mod4+Shift+Down move down
bindsym Mod4+Shift+Up move up
bindsym Mod4+Shift+Right move right

# split in horizontal orientation
bindsym Mod4+h split h

# split in vertical orientation
bindsym Mod4+v split v

# enter fullscreen mode for the focused container
bindsym Mod4+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym Mod4+s layout stacking
bindsym Mod4+w layout tabbed
bindsym Mod4+e layout toggle split

# toggle tiling / floating
bindsym Mod4+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym Mod4+space focus mode_toggle

# focus the parent container
bindsym Mod4+a focus parent

# focus the child container
#bindsym Mod4+d focus child

# move the currently focused window to the scratchpad
bindsym Mod4+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod4+minus scratchpad show

# Define names for default workspaces for which we configure key bindings later on.
# We use variables to avoid repeating the names in multiple places.
set $ws1 "1"
set $ws2 "2"
set $ws3 "3"
set $ws4 "4"
set $ws5 "5"
set $ws6 "6"
set $ws7 "7"
set $ws8 "8"
set $ws9 "9"
set $ws10 "10"


# switch to workspace
bindsym Mod4+1 workspace $ws1
bindsym Mod4+2 workspace $ws2
bindsym Mod4+3 workspace $ws3
bindsym Mod4+4 workspace $ws4
bindsym Mod4+5 workspace $ws5
bindsym Mod4+6 workspace $ws6
bindsym Mod4+7 workspace $ws7
bindsym Mod4+8 workspace $ws8
bindsym Mod4+9 workspace $ws9
bindsym Mod4+0 workspace $ws10

# move focused container to workspace
bindsym Mod4+Shift+1 move container to workspace $ws1
bindsym Mod4+Shift+2 move container to workspace $ws2
bindsym Mod4+Shift+3 move container to workspace $ws3
bindsym Mod4+Shift+4 move container to workspace $ws4
bindsym Mod4+Shift+5 move container to workspace $ws5
bindsym Mod4+Shift+6 move container to workspace $ws6
bindsym Mod4+Shift+7 move container to workspace $ws7
bindsym Mod4+Shift+8 move container to workspace $ws8
bindsym Mod4+Shift+9 move container to workspace $ws9
bindsym Mod4+Shift+0 move container to workspace $ws10

# reload the configuration file
bindsym Mod4+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod4+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod4+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym $left       resize shrink width 10 px or 10 ppt
        bindsym $down       resize grow height 10 px or 10 ppt
        bindsym $up         resize shrink height 10 px or 10 ppt
        bindsym $right      resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left        resize shrink width 10 px or 10 ppt
        bindsym Down        resize grow height 10 px or 10 ppt
        bindsym Up          resize shrink height 10 px or 10 ppt
        bindsym Right       resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape or Mod4+r
        bindsym Return mode "default"
        bindsym Escape mode "default"
        bindsym Mod4+r mode "default"
}

bindsym Mod4+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
    status_command i3status
    position top
}

bindsym Mod4+Escape exec lock

set $displayMode "Set display mode [w]ork [l]aptop"
bindsym Mod4+x mode $displayMode

mode $displayMode {
    bindsym l exec "single-monitor" \
        mode "default"

    bindsym w exec "multi-monitor" \
        mode "default"

    bindsym Return mode "default"
    bindsym Escape mode "default"
}

set $workspaceMove "Move workspace ←/h →/l"
bindsym Mod4+grave mode $workspaceMove

mode $workspaceMove {
    bindsym Left    "move workspace to output left"
    bindsym Right   "move workspace to output right"

    bindsym h       "move workspace to output left"
    bindsym l       "move workspace to output right"

    bindsym Return mode "default"
    bindsym Escape mode "default"
    bindsym Mod4+grave mode "default"
}