Merge pull request #1 from aschiweck/master

Merge additional models

RackCabinets/AnkerPowerPort5/case.scad

@@ -0,0 +1,131 @@
+include<../sixinch_library.scad>
+
+debug = false;
+if (debug) {
+     $fn = 16;
+     color("red") {
+          AnkerPowerPort5();
+     }
+}
+
+
+   //////////////////////////////////////////////////
+  //  PASTE ALL OF: sixinch_library.scad IN HERE  //
+ //   Thingiverse can only accept one file.      //
+//////////////////////////////////////////////////
+
+
+AnkerPowerPort5_length = 90;
+AnkerPowerPort5_height = 27;
+AnkerPowerPort5_width = 58;
+AnkerPowerPort5_powerdepth = 50;
+
+Part = "a"; // [a:All, b:FrontPlate, c:Cabinet, d:Lid, e:BackPlate, f:Handles]
+Units = 3;
+Depth = AnkerPowerPort5_length + AnkerPowerPort5_powerdepth;
+
+xoffset = ((width - AnkerPowerPort5_width) / 2) - 2;
+yoffset = (((Units * unit) - AnkerPowerPort5_height) / 2) - 2;
+round_holes = [[6, 9, 6],
+               [6, 5, 6],
+               [6, 1, 6]];
+square_holes = [[xoffset + 5.5, yoffset + 6, 6, 14],
+                [xoffset + 5.5 +(1*10), yoffset + 6, 6, 14],
+                [xoffset + 5.5 +(2*10), yoffset + 6, 6, 14],
+                [xoffset + 5.5 +(3*10), yoffset + 6, 6, 14],
+                [xoffset + 5.5 +(4*10), yoffset + 6, 6, 14]];
+
+go();
+
+module go(){
+    rotate([90,0,-90]){
+        if(Part=="a"){
+             frontplate(Units,[],[],[],[Units/2],[45],[45]);
+             cabinet_supported () {
+                  cabinet(Depth,Units,[45],[],[Units/2]);
+             }
+             lid_supported () {
+                  lid(Depth,Units,[45],[45]);
+             }
+             back_plate(Units, Depth, [45], [45], [Units/2], square_holes, round_holes);
+             handle(Units, false);
+        }else if(Part=="b"){
+             frontplate(Units,[],[],[],[Units/2],[45],[45]);
+        }else if(Part=="c"){
+             cabinet_supported () {
+                  cabinet(Depth,Units,[45],[],[Units/2]);
+             }
+        }else if(Part=="d"){
+             lid_supported () {
+                  lid(Depth,Units,[45],[45]);
+             }
+        }else if(Part=="e"){
+            back_plate(Units, Depth, [45], [45], [Units/2], square_holes, round_holes);
+        }else if(Part=="f"){
+            handle(Units, true);
+        }
+    }
+}
+
+module lid_supported () {
+     children();
+
+     difference () {
+          union () {
+               translate([(sixinch - AnkerPowerPort5_width) / 2 , (Units * unit), (AnkerPowerPort5_length / 3) * 2 + AnkerPowerPort5_powerdepth]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+               translate([((sixinch - AnkerPowerPort5_width) / 2) + AnkerPowerPort5_width, (Units * unit), (AnkerPowerPort5_length / 3) * 2 + AnkerPowerPort5_powerdepth]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+          }
+          rotate([0, 90, 90]){
+               AnkerPowerPort5();
+          }
+     }
+}
+
+module cabinet_supported () {
+     children();
+
+     difference () {
+          union () {
+               translate([(sixinch - AnkerPowerPort5_width) / 2, 20, (AnkerPowerPort5_length / 3) * 2 + AnkerPowerPort5_powerdepth]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+               translate([((sixinch - AnkerPowerPort5_width) / 2) + AnkerPowerPort5_width, 20, (AnkerPowerPort5_length / 3) * 2 + AnkerPowerPort5_powerdepth]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+
+               translate([(sixinch - AnkerPowerPort5_width) / 2, 20, AnkerPowerPort5_powerdepth + 1]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+               translate([((sixinch - AnkerPowerPort5_width) / 2) + AnkerPowerPort5_width, 20, AnkerPowerPort5_powerdepth + 1]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+          }
+          rotate([0, 90, 90]){
+               AnkerPowerPort5();
+          }
+     }
+}
+
+module AnkerPowerPort5 () {
+     rotate([0,0,0]) {
+          translate([-AnkerPowerPort5_length - 1 - AnkerPowerPort5_powerdepth, -AnkerPowerPort5_width - ((sixinch - AnkerPowerPort5_width) / 2), ((Units * unit) - AnkerPowerPort5_height) / 2]) {
+               cube([AnkerPowerPort5_length, AnkerPowerPort5_width, AnkerPowerPort5_height ]);
+          }
+     }
+}

RackCabinets/RaspberryPi3ModelBHifiBerry/case.scad

@@ -0,0 +1,116 @@
+include<../sixinch_library.scad>
+
+/* debug = false; */
+/* if (debug) { */
+/*      $fn = 16; */
+/*      translate([85.5, 4, 54]) { */
+/*           rotate(a=[-90, -90, 0]) { */
+/*                color("red") { */
+/*                     import("../../../Open_SCAD_Raspberry_PI3_model/files/Pi3HifiBerry.stl"); */
+/*                } */
+/*           } */
+/*      } */
+/* } */
+
+  ///////////////////////////////
+ // Raspberry Pi 3 Model B    //
+///////////////////////////////
+
+print_frontplate_sml = false;
+print_handle_sml     = false;
+print_cabinet_sml    = false;
+print_lid            = false;
+print_rear           = true;
+
+remove = true;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [[65 ,7.5, 3.1],[69.5 ,7.5, 3.1]];
+    round_peg          = [];
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    units              = 3;
+    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+
+}
+
+if(print_handle_sml){ // Handle //
+    units              = 3;
+    lay_flat_for_print = false;
+    handle(units,lay_flat_for_print);
+}
+
+if(print_cabinet_sml){ // Cabinet //
+    w=88;
+    h=70;
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [[w,h,6,3,4],
+                          [w-49,h,6,3,4],
+                          [w-49,h-58,6,3,4],
+                          [w,h-58,6,3,4]];
+    depth              = 98;
+    units              = 3;
+
+    difference() {
+
+         cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
+
+         hull() {
+              hull() {
+                   rotate(a=90, v=[0, 1, 0]) {
+                        translate([-45.5, 30, 10]) {
+                             cylinder(h=50, r=7);
+                        }
+                   }
+                   rotate(a=90, v=[0, 1, 0]) {
+                        translate([-62.5, 30, 10]) {
+                             cylinder(h=50, r=7);
+                        }
+                   }
+              }
+              hull() {
+                   rotate(a=90, v=[0, 1, 0]) {
+                        translate([-45.5, 50, 10]) {
+                             cylinder(h=50, r=7);
+                        }
+                   }
+                   rotate(a=90, v=[0, 1, 0]) {
+                        translate([-62.5, 50, 10]) {
+                             cylinder(h=50, r=7);
+                        }
+                   }
+              }
+         }
+    }
+
+}
+
+if(print_lid){ // Lid //
+    depth = 98;
+    units = 3;
+    screw_front = [36];//mm
+    screw_back  = [36];//mm
+    lid(98,3,screw_front,screw_back);
+
+    translate([65, 20.5, 12]) {
+         cube([40, 21.5, 5]);
+    }
+    translate([65, 20.5, 71]) {
+         cube([40, 21.5, 5]);
+    }
+
+}
+
+if(print_rear){  // Back plate //
+    square_hole  = [[37, 5, 17, 15] , [57, 6, 15, 16] , [75, 6, 15, 16] ];
+    round_hole   = [[6,5,6],[6,1,6], [24,3.5,3.5], [24,1.2,3.5]  ,[30,3.5,3.5], [30,1.2,3.5]];
+    screw_top    = [36];//mm
+    screw_bottom = [36];//mm
+    screw_side   = [];
+    depth        = 98;
+    units        = 3;
+    back_plate(units,depth,screw_top,screw_bottom,screw_side,square_hole,round_hole);
+}

RackCabinets/RaspberryPi3ModelBHifiBerry/fibre.scad

@@ -0,0 +1,3 @@
+$fn=50;
+
+cylinder(h=14, d=2.8);

RackCabinets/SMSLSA50/case.scad

@@ -0,0 +1,203 @@
+include<../sixinch_library.scad>
+
+debug = false;
+if (debug) {
+     $fn = 16;
+     color("red") {
+          sa50();
+     }
+}
+
+
+   //////////////////////////////////////////////////
+  //  PASTE ALL OF: sixinch_library.scad IN HERE  //
+ //   Thingiverse can only accept one file.      //
+//////////////////////////////////////////////////
+
+
+sa50_length = 117.5;
+sa50_height = 39;
+sa50_width = 88;
+
+Part = "a"; // [a:All, b:FrontPlate, b2:FrontPlate2, c:Cabinet, d:Lid, e:BackPlate, f:Handles]
+Units = 5;
+Depth = sa50_length;
+
+xoffset = (width - sa50_width) / 2;
+yoffset = ((Units * unit) - sa50_height) / 2;
+round_holes = [[xoffset + 12, yoffset + 14, 10],
+               [xoffset + 12, yoffset + 28, 10],
+               [xoffset + 35.5, yoffset + 10, 13],
+               [xoffset + 35.5, yoffset + 26, 13],
+               [xoffset + 54, yoffset + 10, 13],
+               [xoffset+ 54, yoffset + 26, 13],
+               [xoffset + 73, yoffset + 13.5, 7]];
+
+go();
+
+module go(){
+    rotate([90,0,-90]){
+        if(Part=="a"){
+            lower() {
+                 frontplate(Units,[],[],[],[Units/2],[45],[45]);
+            }
+            upper() {
+                 frontplate(Units,[],[],[],[Units/2],[45],[45]);
+            }
+            cabinet_supported () {
+                 cabinet(Depth,Units,[45],[],[Units/2]);
+            }
+            lid_supported () {
+                  lid(Depth,Units,[45],[45]);
+            }
+            back_plate(Units, Depth, [45], [45], [Units/2], [], round_holes);
+            handle(Units,false);
+        }else if(Part=="b"){
+            lower() {
+                 frontplate(Units,[],[],[],[Units/2],[45],[45]);
+            }
+        }else if(Part=="b2"){
+            upper() {
+                 frontplate(Units,[],[],[],[Units/2],[45],[45]);
+            }
+        }else if(Part=="c"){
+             cabinet_supported () {
+                  cabinet(Depth,Units,[45],[],[Units/2]);
+             }
+        }else if(Part=="d"){
+             lid_supported () {
+                  lid(Depth,Units,[45],[45]);
+             }
+        }else if(Part=="e"){
+            back_plate(Units, Depth, [45], [45], [Units/2], [], round_holes);
+
+/* translate([-sa50_length, -sa50_width - ((sixinch - sa50_width) / 2), ((Units * unit) - sa50_height) / 2]) { */
+/*             cube([10, 10, 10]); */
+/*             } */
+        }else if(Part=="f"){
+            handle(Units,true);
+        }
+    }
+}
+
+module lower () {
+   difference() {
+        children();
+        rotate([0, 90, 90]){
+             sa50();
+        }
+        rotate([0, 90, 90]){
+             translate([0, 0, -sa50_height]) {
+                  sa50();
+             }
+        }
+   }
+}
+
+module upper () {
+     intersection() {
+          children();
+          rotate([0, 90, 90]){
+               translate([0, 0, -sa50_height]) {
+                    sa50();
+               }
+          }
+     }
+     rotate([-90,90,0]) {
+          translate([-6, -(width - sa50_width + 10), 2]) {
+               cube([3, 8, 12]);
+          }
+          translate([-6, - width - 10, 2]) {
+               cube([3, 8, 12]);
+          }
+     }
+}
+
+module lid_supported () {
+     children();
+
+     difference () {
+          union () {
+               translate([(sixinch - sa50_width) / 2 , (Units * unit), (sa50_length / 2) + 20]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+               translate([((sixinch - sa50_width) / 2) + sa50_width, (Units * unit), (sa50_length / 2) + 20]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=20, r=5);
+                    }
+               }
+          }
+          rotate([0, 90, 90]){
+               sa50();
+          }
+     }
+}
+
+module cabinet_supported () {
+     children();
+
+     difference () {
+          union () {
+               translate([(sixinch - sa50_width) / 2, 25, (sa50_length / 2) - 45]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=25, r=5);
+                    }
+               }
+               translate([((sixinch - sa50_width) / 2) + sa50_width, 25, (sa50_length / 2) - 45]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=25, r=5);
+                    }
+               }
+               translate([(sixinch - sa50_width) / 2, 25, (sa50_length / 2)]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=25, r=5);
+                    }
+               }
+               translate([((sixinch - sa50_width) / 2) + sa50_width, 25, (sa50_length / 2)]) {
+                    rotate([90, 0, 0]) {
+                         cylinder(h=25, r=5);
+                    }
+               }
+
+               difference () {
+                    translate([((sixinch - sa50_width) / 2) + 5 + 10, 20, sa50_length - 12 - 5]) {
+                         rotate([90, 0, 0]) {
+                              cylinder(h=20, r=5 + 2);
+                         }
+                    }
+                    translate([((sixinch - sa50_width) / 2) + 5 + 10, 20, sa50_length - 12]) {
+                         rotate([90, 0, 0]) {
+                              cylinder(h=8, r=5.5);
+                         }
+                    }
+               }
+
+               difference () {
+                    translate([((sixinch - sa50_width) / 2) + sa50_width - 5 - 10, 20, sa50_length - 12 - 5]) {
+                         rotate([90, 0, 0]) {
+                              cylinder(h=20, r=5 + 2);
+                         }
+                    }
+                    translate([((sixinch - sa50_width) / 2) + sa50_width - 5 - 10, 20, sa50_length - 12]) {
+                         rotate([90, 0, 0]) {
+                              cylinder(h=8, r=5.5);
+                         }
+                    }
+               }
+
+          }
+          rotate([0, 90, 90]){
+               sa50();
+          }
+     }
+}
+
+module sa50 () {
+     rotate([0,0,0]) {
+          translate([-sa50_length, -sa50_width - ((sixinch - sa50_width) / 2), ((Units * unit) - sa50_height) / 2]) {
+               cube([sa50_length, sa50_width, sa50_height ]);
+          }
+     }
+}

RackCabinets/sixinch_library.scad

@@ -177,6 +177,11 @@ module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front){
 
 
 module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
+
+/* RaspberryPi3ModelBHifiBerry */
+/* difference(){ */
+/*     union() { */
+
     difference(){
         translate([20,0,gauge]){
             difference(){
@@ -243,12 +248,35 @@ module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
                 od = round_peg[i][2];
                 id = round_peg[i][3];
                 he = round_peg[i][4];
-                translate([x,0,y]){peg(0,0,od,id,he); }
+                translate([x,0,y]){peg(0,0,od,id,he);}
              }
         }
     }
-}
 
+/* RaspberryPi3ModelBHifiBerry */
+/* } */
+/*     translate([20+gauge_box,0,gauge]){ */
+/*         if(len(round_peg)>0){ */
+/*             for(i=[0:len(round_peg)-1]){ */
+/*                 x = round_peg[i][0]; */
+/*                 y = round_peg[i][1]; */
+/*                 od = round_peg[i][2]; */
+/*                 id = round_peg[i][3]; */
+/*                 he = round_peg[i][4]; */
+
+/*                 translate([x,5,y]){ */
+/*                      color("red") { */
+/*                           rotate([90, 0, 0]) { */
+/*                                cylinder(h=4,r=1.5); */
+/*                           } */
+/*                      } */
+/*                 } */
+/*              } */
+/*         } */
+/*     } */
+/* } */
+
+}
 
 module lid(dp,u,screw_front,screw_back){
 
@@ -286,7 +314,9 @@ module lid(dp,u,screw_front,screw_back){
     translate([sixinch-20-gauge_box-4,unit*u +0.01  ,gauge+dp-10-10+10-5]){rotate([90,0,0]){screw();}}
     if(dp>90){
         translate([sixinch-20-gauge_box-4,unit*u+0.01   ,gauge+dp/2-5+10-5]){rotate([90,0,0]){screw();}}
-        translate([20+gauge_box+4,unit*u+0.01   ,gauge+dp/2-5+5]){rotate([90,0,0]){screw();}}
+        if(!remove){
+             translate([20+gauge_box+4,unit*u+0.01   ,gauge+dp/2-5+5]){rotate([90,0,0]){screw();}}
+        }
     }
      chimney();
 
@@ -518,8 +548,12 @@ module frontplate(u,square_hole,round_hole,round_peg,screw_side_front,screw_top,
 
     //cabinet support bars
     translate([0,0,gauge]){
-        translate([20+width*0.25,gauge_box,0]){  cube([width*0.5,1,1.5]);  }
-        translate([20+width*0.25,unit*u-1-gauge_box,0]){  cube([width*0.5,1,1.5]);  }           
+        /* translate([20+width*0.25,gauge_box,0]){  cube([width*0.5,1,1.5]);  } */
+        /* translate([20+width*0.25,unit*u-1-gauge_box,0]){  cube([width*0.5,1,1.5]);  } */
+        /* FIXME: */
+        translate([25+width*0.25,gauge_box,0]){  cube([width*0.5-12.5,1,1.5]);  }
+        translate([25+width*0.25,unit*u-1-gauge_box,0]){  cube([width*0.5-12.5,1,1.5]);  }
+
     }
 
 
@@ -554,22 +588,3 @@ module baseplate(u,handle){
     }
 }
 }
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-