Add AnkerPowerPort6 by RazziaDK

https://www.thingiverse.com/thing:3670737

RackCabinets/AnkerPowerPort6/AnkerPowerPort6.scad

@@ -0,0 +1,89 @@
+include<../sixinch_library.scad>
+
+//
+
+  ///////////////////////////////
+ // Raspberry Pi 3 Model B    //
+///////////////////////////////
+
+print_frontplate_sml = false;
+print_handle_sml     = false;
+print_cabinet_sml    = true;
+print_lid            = false;
+print_rear           = false;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    units              = 3; 
+    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+
+}
+
+if(print_handle_sml){ // Handle // 
+    units              = 3;
+    lay_flat_for_print = false;   
+    handle(units,lay_flat_for_print);
+}
+
+if(print_cabinet_sml){ // Cabinet //  
+    w=88;
+    h=70;
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [[30,46.3,15,0,10],  // Pillar in front of PowerPort 6
+                          [81,46.3,15,0,10],  // Pillar in front of PowerPort 6
+                          [15.2,70,10,0,10],  // Pillar to the near right of PowerPort 6
+                          [95.8,70,10,0,10],  // Pillar to the near left of PowerPort 6
+                          [15.2,110,10,0,10],  // Pillar to the far right of PowerPort 6
+                          [95.8,110,10,0,10],  // Pillar to the far left of PowerPort 6
+                          [57,120,50,0,4],  // Pillar under the PowerPort 6
+                          [57,80,50,0,4],  // Pillar under the PowerPort 6
+                          ];
+    depth              = 155;
+    units              = 2;
+    cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
+}
+
+if(print_lid){ // Lid // 
+    depth = 155;
+    units = 3;
+    screw_front = [36];//mm
+    screw_back  = [36];//mm
+    lid(depth,units,screw_front,screw_back);        
+}
+
+if(print_rear){  // Back plate //    
+    usb_padding  = 9;
+    square_hole  = [[29 ,usb_padding, 6, 14], [29+(1*10) ,usb_padding, 6, 14], [29+(2*10) ,usb_padding, 6, 14], [29+(3*10) ,usb_padding, 6, 14], [29+(4*10) ,usb_padding, 6, 14], [29+(5*10) ,usb_padding, 6, 14]];
+    round_hole   = [[6,9,6],[6,5,6],[6,1,6]];
+    screw_top    = [36];//mm
+    screw_bottom = [36];//mm
+    screw_side   = [];
+    depth        = 155;
+    units        = 3;
+    back_plate(units,depth,screw_top,screw_bottom,screw_side,square_hole,round_hole);
+}  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

RackCabinets/Edge Router X/EdgeRouter X - mesh frontplate.scad

@@ -0,0 +1,49 @@
+include<../sixinch_library.scad>
+include<../../Libs/Mesh-lib.scad>
+
+
+  ///////////////////////////////
+ // EdgeRouter X              //
+///////////////////////////////
+
+print_frontplate_sml = true;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    units              = 3; 
+    difference() {
+        union() {
+            frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+            
+            
+        }
+
+        translate([25,1.5,0]) {
+            intersection(){
+                translate([-1.5,-1.5,0]){
+                    difference() {
+                        mesh(17, 6, 3, 3);
+                        translate([12.5,  6, 0]){cylinder(50,4.5,4.5);}
+                        translate([12.5, 36, 0]){cylinder(50,4.5,4.5);}
+                        translate([95.5,  6, 0]){cylinder(50,4.5,4.5);}
+                        translate([95.5, 36, 0]){cylinder(50,4.5,4.5);}
+                    }
+                }
+                
+                cube([105,38,10]);
+            }    
+        }
+        
+        translate([0,0,3]) cube([155,130,10]);
+    } 
+    
+    rotate([180,0,0])
+        translate([58.5, -28, -3])
+            linear_extrude(5)
+                text("router");
+}

RackCabinets/Philips Hue/Hue frontplate-text.scad

@@ -0,0 +1,49 @@
+include<../sixinch_library.scad>
+include<../../Libs/Mesh-lib.scad>
+
+
+  ///////////////////////////////
+ // Raspberry Pi 3 Model B    //
+///////////////////////////////
+
+print_frontplate_sml = true;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    units              = 3; 
+    difference() {
+        union() {
+            frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+            
+            
+        }
+
+        translate([25,1.5,0]) {
+            intersection(){
+                translate([-1.5,-1.5,0]){
+                    difference() {
+                        mesh(17, 6, 3, 3);
+                        translate([12.5,  6, 0]){cylinder(50,4.5,4.5);}
+                        translate([12.5, 36, 0]){cylinder(50,4.5,4.5);}
+                        translate([95.5,  6, 0]){cylinder(50,4.5,4.5);}
+                        translate([95.5, 36, 0]){cylinder(50,4.5,4.5);}
+                    }
+                }
+                
+                cube([105,38,10]);
+            }    
+        }
+        
+        translate([0,0,3]) cube([155,130,10]);
+    } 
+    
+    rotate([180,0,0])
+        translate([43.5, -25, -3])
+            linear_extrude(5)
+                text("Philips Hue");
+}

RackCabinets/RaspberryPi3BMounts/R3_Cabinet_with_mounts.scad

@@ -0,0 +1,33 @@
+include<../sixinch_library.scad>
+
+
+  ///////////////////////////////
+ // Raspberry Pi 3 Model B    //
+///////////////////////////////
+print_cabinet_sml    = true;
+
+if(print_cabinet_sml){ // Cabinet //  
+    w=88;
+    h=70;
+    
+    pole=2.52;
+    height=8;
+    
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [
+        [w,h,6,2.8,4],
+        [w-49,h,6,2.8,4],
+        [w-49,h-58,6,2.8,4],
+        [w,h-58,6,2.8,4],
+    
+        [w,h,      pole,0,height],
+        [w-49,h,   pole,0,height],
+        [w-49,h-58,pole,0,height],
+        [w,h-58,   pole,0,height]];
+    depth              = 98;
+    units              = 2;
+    shift              = 0;
+
+    cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);    
+}

RackCabinets/SmartThings/SmartThings - mesh frontplate.scad

@@ -0,0 +1,71 @@
+include<../sixinch_library.scad>
+include<../../Libs/Mesh-lib.scad>
+
+
+  ///////////////////////////////
+ // SmartThings frontplate    //
+///////////////////////////////
+
+print_frontplate_sml = 1;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    units              = 3; 
+    difference() {
+        union() {
+            frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+        }
+
+        translate([25,1.5,0]) {
+            intersection(){
+                translate([-1.5,-1.5,0]){
+                    difference() {
+                        mesh(17, 6, 3, 3);
+                        translate([12.5,  6, 0]){cylinder(50,4.5,4.5);}
+                        translate([12.5, 36, 0]){cylinder(50,4.5,4.5);}
+                        translate([95.5,  6, 0]){cylinder(50,4.5,4.5);}
+                        translate([95.5, 36, 0]){cylinder(50,4.5,4.5);}
+                    }
+                }
+                
+                cube([105,38,10]);
+            }    
+        }
+        
+        translate([0,0,3]) cube([155,130,10]);
+    } 
+    
+    rotate([180,0,0])
+        translate([50.5, -25, -3])
+            linear_extrude(5)
+                text("SmartThings");
+    translate([25,33,3])
+        rotate([180,0,0])
+            scale([0.04, 0.04, 0.08])
+                logo();
+               
+           
+}
+
+module logo(){
+    difference() {
+        surface(file = "Logo.png");
+        translate([0,0,-5])
+            cube([600,600,5]);
+        translate([0,0,80])
+            cube([600,600,50]);
+    }
+}
+
+
+//cube([600,600,0.1]);
+//difference(){
+//    
+//surface(file = "Logo.png", center = false);
+
+//}

RackCabinets/SmartThings/SmartThings Hub v2.scad

@@ -0,0 +1,115 @@
+include<../sixinch_library.scad>
+
+
+  ///////////////////////////////
+ // SmartThing Hub v2         //
+///////////////////////////////
+
+print_frontplate_sml = false;
+print_handle_sml     = false;
+print_cabinet_sml    = 0;
+print_lid            = 0;
+print_rear           = 1;
+model                = 0;
+
+units = 3;
+depth = 140;
+
+module model() {
+    rotate([-90,0,0]){
+        translate([22, -135, 4])
+          difference(){
+            union(){
+                color([1,1,1]) {
+                 fillet = 20;
+                    linear_extrude(height = 34)
+                    translate([fillet,fillet,0]){
+                        offset(r=fillet) {
+                            square([110 - 2* fillet, 126 - 2*fillet]);
+                        }
+                    }
+                }
+            }
+            color([0.5, 0.5, 0.5]) 
+            union() {
+                translate([67, -1, 10]) 
+                    cube([15.5, 16, 13]);
+                
+                translate([25,-1,15])
+                    rotate([270,0,0])
+                        cylinder(15.5, 5, 5);
+            }
+            
+          }
+      }
+}
+
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+
+}
+
+if(print_handle_sml){ // Handle // 
+    lay_flat_for_print = false;   
+    handle(units,lay_flat_for_print);
+}
+
+if(print_cabinet_sml){ // Cabinet //  
+    w=88;
+    h=70;
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [
+        [25,  8, 15, 0, 15],  // Pillar in front
+        [85,  8, 15, 0, 15],  // Pillar in front
+                              
+        [5,   80, 10, 0, 15],  // Pillar to the near right
+        [5,  120, 10, 0, 15],  // Pillar to the far right
+
+        [105, 80, 10, 0, 15],  // Pillar to the near left
+        [105, 120, 10, 0, 15],  // Pillar to the far left
+
+        [55,  70, 45, 0,  8],  // Pillar under the switch
+    
+    ];
+    difference() {
+        cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front, true);
+        model();
+    }
+}
+
+if(print_lid){ // Lid // 
+    screw_front = [36];//mm
+    screw_back  = [36];//mm
+    remove = true;
+    difference () {
+        lid(depth, units, screw_front, screw_back, true);        
+        model();
+    }
+}
+
+if(print_rear){  // Back plate //    
+    square_hole  = [
+        [71.5, 13, 15.5, 13],
+    ];
+    round_hole   = [
+        [25.5, 19, 10, 13]
+    ];
+    screw_top    = [36];//mm
+    screw_bottom = [36];//mm
+    screw_side   = [];
+    back_plate(units, depth, screw_top, screw_bottom, screw_side, square_hole,round_hole);
+}  
+
+
+// EdgeRouter X model
+if(model) {
+  model();
+}

RackCabinets/sixinch_library.scad

@@ -155,9 +155,9 @@ module nuttrap(){
 
 
 
-module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front){
+module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle=false){
     difference(){
-        box(dp,u,screw_bottom_front,round_peg,screw_side_front);
+        box(dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle);
 
                translate([20,unit/2+3,sixinch-40]){ cylinder(d=gauge_box,h=41);}
                translate([20,unit/2+0,sixinch-40]){ cylinder(d=gauge_box,h=41);}
@@ -176,7 +176,7 @@ module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front){
 
 
 
-module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
+module box(dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle){
 
 /* RaspberryPi3ModelBHifiBerry */
 /* difference(){ */
@@ -218,7 +218,7 @@ module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
     translate([20+gauge_box,unit*u-gauge_box,gauge+dp-10-10]){rotate([0,0,-90]){screwtrap();}}
     translate([sixinch-20-gauge_box,unit*u-gauge_box,gauge+10+10]){rotate([180,0,-90]){screwtrap();}}
     translate([sixinch-20-gauge_box,unit*u-gauge_box,gauge+dp-10-10+10]){rotate([180,0,-90]){screwtrap();}}
-    if(dp>90){
+    if(dp>90 && !remove_middle){
         translate([sixinch-20-gauge_box,unit*u-gauge_box,gauge+dp/2-5+10]){rotate([180,0,-90]){screwtrap();}}
         translate([20+gauge_box,unit*u-gauge_box,gauge+dp/2-5]){rotate([0,0,-90]){screwtrap();}}
     }
@@ -278,7 +278,7 @@ module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
 
 }
 
-module lid(dp,u,screw_front,screw_back){
+module lid(dp,u,screw_front,screw_back, remove_middle=false){
     
     difference(){
     union(){
@@ -313,9 +313,9 @@ module lid(dp,u,screw_front,screw_back){
     translate([sixinch-20-gauge_box-4,unit*u+0.01   ,gauge+10+10-5]){rotate([90,0,0]){screw();}}
     translate([sixinch-20-gauge_box-4,unit*u +0.01  ,gauge+dp-10-10+10-5]){rotate([90,0,0]){screw();}}
     if(dp>90){
-        translate([sixinch-20-gauge_box-4,unit*u+0.01   ,gauge+dp/2-5+10-5]){rotate([90,0,0]){screw();}}
-        if(!remove){
-             translate([20+gauge_box+4,unit*u+0.01   ,gauge+dp/2-5+5]){rotate([90,0,0]){screw();}}
+        if(!remove_middle){
+            translate([sixinch-20-gauge_box-4,unit*u+0.01   ,gauge+dp/2-5+10-5]){rotate([90,0,0]){screw();}}
+            translate([20+gauge_box+4,unit*u+0.01   ,gauge+dp/2-5+5]){rotate([90,0,0]){screw();}}
         }
     }
      chimney();