RackCabinets/Edge Router X/EdgeRouter X.scad

@@ -1,104 +0,0 @@
-include<../sixinch_library.scad>
-
-
-  ///////////////////////////////
- // Edgerouter X              //
-///////////////////////////////
-
-print_frontplate_sml = false;
-print_handle_sml     = false;
-print_cabinet_sml    = false;
-print_lid            = false;
-print_rear           = true;
-model                = false;
-
-units = 3;
-depth = 98;
-
-module model() {
-    rotate([-90,0,0]){
-        translate([22, -99, 8])
-          difference(){
-            union(){
-             color([1,1,1]) cube([110, 75, 22]);    // EdgeRouter X model
-            }
-            translate([9, -1, 6]) 
-                color([0.5, 0.5, 0.5]) 
-                    union() { // RJ45 ports
-                        translate([0* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
-                        translate([1* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
-                        translate([2* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
-                        translate([3* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
-                        translate([4* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
-                    }
-          }
-      }
-}
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-
-}
-
-if(print_handle_sml){ // Handle // 
-    lay_flat_for_print = false;   
-    handle(units,lay_flat_for_print);
-}
-
-if(print_cabinet_sml){ // Cabinet //  
-    w=88;
-    h=70;
-    screw_bottom_front = [36];
-    screw_side_front   = [];
-    round_peg          = [
-        [20,  20, 15, 0, 15],  // Pillar in front
-        [90,  20, 15, 0, 15],  // Pillar in front
-                              
-        [5,   80, 10, 0, 15],  // Pillar to the near right
-    
-        [105, 80, 10, 0, 15],  // Pillar to the near left
-    
-        [55,  50, 45, 0,  8],  // Pillar under the switch
-    
-    ];
-    difference() {
-        cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
-        model();
-    }
-}
-
-if(print_lid){ // Lid // 
-    screw_front = [36];//mm
-    screw_back  = [36];//mm
-    difference () {
-        lid(depth, units, screw_front, screw_back);        
-        model();
-    }
-}
-
-if(print_rear){  // Back plate //    
-    square_hole  = [
-        [9 + 0 * (15.5 + 3.5), 12, 15.5, 13],
-        [9 + 1 * (15.5 + 3.5), 12, 15.5, 13],
-        [9 + 2 * (15.5 + 3.5), 12, 15.5, 13],
-        [9 + 3 * (15.5 + 3.5), 12, 15.5, 13],
-        [9 + 4 * (15.5 + 3.5), 12, 15.5, 13],
-    ];
-    round_hole   = [];
-    screw_top    = [36];//mm
-    screw_bottom = [36];//mm
-    screw_side   = [];
-    back_plate(units, depth, screw_top, screw_bottom, screw_side, square_hole,round_hole);
-}  
-
-
-// EdgeRouter X model
-if(model) {
-  model();
-}

RackCabinets/Philips Hue/Philips Hue_cabinet.scad

@@ -1,115 +0,0 @@
-include<../sixinch_library.scad>
-
-
-  ///////////////////////////////
- // Philips Hue gen 2         //
-///////////////////////////////
-
-print_frontplate_sml = false;
-print_handle_sml     = false;
-print_cabinet_sml    = false;
-print_lid            = true;
-print_rear           = false;
-model                = false;
-
-units = 3;
-depth = 100;
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-
-}
-
-if(print_handle_sml){ // Handle // 
-    lay_flat_for_print = false;   
-    handle(units,lay_flat_for_print);
-}
-
-if(print_cabinet_sml){ // Cabinet //  
-    w=88;
-    h=70;
-    screw_bottom_front = [36];
-    screw_side_front   = [];
-    round_peg          = [
-        [20,  10, 15, 0, 15],  // Pillar in front
-        [80,  10, 15, 0, 15],  // Pillar in front
-                              
-        [10,  30, 10, 0, 15],  // Pillar to the near right
-        [10,  80, 10, 0, 15],  // Pillar to the far right
-    
-        [99,  30, 10, 0, 15],  // Pillar to the near left
-        [99,  80, 10, 0, 15],  // Pillar to the far left
-    
-        [55,  50, 50, 0,  8],  // Pillar under the switch
-    
-    ];
-    difference() {
-        cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
-        rotate([-90,0,0]){
-            translate([32.5, -101, 8])
-                cube([91.5, 91.5, 26]);    // Philips Hue model
-          }
-    }
-
-}
-
-if(print_lid){ // Lid // 
-    screw_front = [36];//mm
-    screw_back  = [36];//mm
-    difference () {
-        union(){
-            lid(depth, units, screw_front, screw_back);     
-            rotate([-90,0,0])
-                translate([77.5, -56, 40.15])
-                    cylinder(2, r=45/2, center=false);   
-        }
-        
-        rotate([-90,0,0]){
-            translate([27.5, -156, 8])
-                union(){
-                    cube([91.5, 91.5, 26]);    // Philips Hue model
-                    translate([5 + 45.75, 55+45.75 ,20])
-                        cylinder(100, r=35/2, center=false);
-                }
-            
-        }
-    }
-}
-
-if(print_rear){  // Back plate //    
-    square_hole  = [[63.5, 9, 15, 14]];
-    round_hole   = [[43,19,10]];
-    screw_top    = [36];//mm
-    screw_bottom = [36];//mm
-    screw_side   = [];
-    back_plate(units, depth, screw_top, screw_bottom, screw_side, square_hole,round_hole);
-}  
-
-
-// Philips Hue model
-if(model) {
-  rotate([-90,0,0]){
-    translate([32.5, -101, 8])
-      difference(){
-        union(){
-            color([1,1,1]) 
-                cube([91.5, 91.5, 26]);    // Philips Hue model
-            translate([45.75, 45.75 ,20])
-                cylinder(100, r=35/2, center=false);
-        }
-        translate([ 55, -1, 4]) 
-            color([0.5, 0.5, 0.5]) 
-                cube([14, 16, 14]);       // RJ45 ports
-        translate([ 29, -1,  13]) // Power jack
-            rotate([90,0,0])
-                color([0.5, 0.5, 0.5]) 
-                    cylinder(10,5,5,true);
-      }
-  }
-}