RackCabinets/AnkerPowerPort6/AnkerPowerPort6.scad

@@ -1,89 +0,0 @@
-include<../sixinch_library.scad>
-
-//
-
-  ///////////////////////////////
- // Raspberry Pi 3 Model B    //
-///////////////////////////////
-
-print_frontplate_sml = false;
-print_handle_sml     = false;
-print_cabinet_sml    = true;
-print_lid            = false;
-print_rear           = false;
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    units              = 3; 
-    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-
-}
-
-if(print_handle_sml){ // Handle // 
-    units              = 3;
-    lay_flat_for_print = false;   
-    handle(units,lay_flat_for_print);
-}
-
-if(print_cabinet_sml){ // Cabinet //  
-    w=88;
-    h=70;
-    screw_bottom_front = [36];
-    screw_side_front   = [];
-    round_peg          = [[30,46.3,15,0,10],  // Pillar in front of PowerPort 6
-                          [81,46.3,15,0,10],  // Pillar in front of PowerPort 6
-                          [15.2,70,10,0,10],  // Pillar to the near right of PowerPort 6
-                          [95.8,70,10,0,10],  // Pillar to the near left of PowerPort 6
-                          [15.2,110,10,0,10],  // Pillar to the far right of PowerPort 6
-                          [95.8,110,10,0,10],  // Pillar to the far left of PowerPort 6
-                          [57,120,50,0,4],  // Pillar under the PowerPort 6
-                          [57,80,50,0,4],  // Pillar under the PowerPort 6
-                          ];
-    depth              = 155;
-    units              = 2;
-    cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
-}
-
-if(print_lid){ // Lid // 
-    depth = 155;
-    units = 3;
-    screw_front = [36];//mm
-    screw_back  = [36];//mm
-    lid(depth,units,screw_front,screw_back);        
-}
-
-if(print_rear){  // Back plate //    
-    usb_padding  = 9;
-    square_hole  = [[29 ,usb_padding, 6, 14], [29+(1*10) ,usb_padding, 6, 14], [29+(2*10) ,usb_padding, 6, 14], [29+(3*10) ,usb_padding, 6, 14], [29+(4*10) ,usb_padding, 6, 14], [29+(5*10) ,usb_padding, 6, 14]];
-    round_hole   = [[6,9,6],[6,5,6],[6,1,6]];
-    screw_top    = [36];//mm
-    screw_bottom = [36];//mm
-    screw_side   = [];
-    depth        = 155;
-    units        = 3;
-    back_plate(units,depth,screw_top,screw_bottom,screw_side,square_hole,round_hole);
-}  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

RackCabinets/Edge Router X/EdgeRouter X - mesh frontplate.scad

@@ -1,49 +0,0 @@
-include<../sixinch_library.scad>
-include<../../Libs/Mesh-lib.scad>
-
-
-  ///////////////////////////////
- // EdgeRouter X              //
-///////////////////////////////
-
-print_frontplate_sml = true;
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    units              = 3; 
-    difference() {
-        union() {
-            frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-            
-            
-        }
-
-        translate([25,1.5,0]) {
-            intersection(){
-                translate([-1.5,-1.5,0]){
-                    difference() {
-                        mesh(17, 6, 3, 3);
-                        translate([12.5,  6, 0]){cylinder(50,4.5,4.5);}
-                        translate([12.5, 36, 0]){cylinder(50,4.5,4.5);}
-                        translate([95.5,  6, 0]){cylinder(50,4.5,4.5);}
-                        translate([95.5, 36, 0]){cylinder(50,4.5,4.5);}
-                    }
-                }
-                
-                cube([105,38,10]);
-            }    
-        }
-        
-        translate([0,0,3]) cube([155,130,10]);
-    } 
-    
-    rotate([180,0,0])
-        translate([58.5, -28, -3])
-            linear_extrude(5)
-                text("router");
-}

RackCabinets/Philips Hue/Hue frontplate-text.scad

@@ -1,49 +0,0 @@
-include<../sixinch_library.scad>
-include<../../Libs/Mesh-lib.scad>
-
-
-  ///////////////////////////////
- // Raspberry Pi 3 Model B    //
-///////////////////////////////
-
-print_frontplate_sml = true;
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    units              = 3; 
-    difference() {
-        union() {
-            frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-            
-            
-        }
-
-        translate([25,1.5,0]) {
-            intersection(){
-                translate([-1.5,-1.5,0]){
-                    difference() {
-                        mesh(17, 6, 3, 3);
-                        translate([12.5,  6, 0]){cylinder(50,4.5,4.5);}
-                        translate([12.5, 36, 0]){cylinder(50,4.5,4.5);}
-                        translate([95.5,  6, 0]){cylinder(50,4.5,4.5);}
-                        translate([95.5, 36, 0]){cylinder(50,4.5,4.5);}
-                    }
-                }
-                
-                cube([105,38,10]);
-            }    
-        }
-        
-        translate([0,0,3]) cube([155,130,10]);
-    } 
-    
-    rotate([180,0,0])
-        translate([43.5, -25, -3])
-            linear_extrude(5)
-                text("Philips Hue");
-}

RackCabinets/RaspberryPi3BMounts/R3_Cabinet_with_mounts.scad

@@ -1,33 +0,0 @@
-include<../sixinch_library.scad>
-
-
-  ///////////////////////////////
- // Raspberry Pi 3 Model B    //
-///////////////////////////////
-print_cabinet_sml    = true;
-
-if(print_cabinet_sml){ // Cabinet //  
-    w=88;
-    h=70;
-    
-    pole=2.52;
-    height=8;
-    
-    screw_bottom_front = [36];
-    screw_side_front   = [];
-    round_peg          = [
-        [w,h,6,2.8,4],
-        [w-49,h,6,2.8,4],
-        [w-49,h-58,6,2.8,4],
-        [w,h-58,6,2.8,4],
-    
-        [w,h,      pole,0,height],
-        [w-49,h,   pole,0,height],
-        [w-49,h-58,pole,0,height],
-        [w,h-58,   pole,0,height]];
-    depth              = 98;
-    units              = 2;
-    shift              = 0;
-
-    cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);    
-}

RackCabinets/SmartThings/SmartThings - mesh frontplate.scad

@@ -1,71 +0,0 @@
-include<../sixinch_library.scad>
-include<../../Libs/Mesh-lib.scad>
-
-
-  ///////////////////////////////
- // SmartThings frontplate    //
-///////////////////////////////
-
-print_frontplate_sml = 1;
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    units              = 3; 
-    difference() {
-        union() {
-            frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-        }
-
-        translate([25,1.5,0]) {
-            intersection(){
-                translate([-1.5,-1.5,0]){
-                    difference() {
-                        mesh(17, 6, 3, 3);
-                        translate([12.5,  6, 0]){cylinder(50,4.5,4.5);}
-                        translate([12.5, 36, 0]){cylinder(50,4.5,4.5);}
-                        translate([95.5,  6, 0]){cylinder(50,4.5,4.5);}
-                        translate([95.5, 36, 0]){cylinder(50,4.5,4.5);}
-                    }
-                }
-                
-                cube([105,38,10]);
-            }    
-        }
-        
-        translate([0,0,3]) cube([155,130,10]);
-    } 
-    
-    rotate([180,0,0])
-        translate([50.5, -25, -3])
-            linear_extrude(5)
-                text("SmartThings");
-    translate([25,33,3])
-        rotate([180,0,0])
-            scale([0.04, 0.04, 0.08])
-                logo();
-               
-           
-}
-
-module logo(){
-    difference() {
-        surface(file = "Logo.png");
-        translate([0,0,-5])
-            cube([600,600,5]);
-        translate([0,0,80])
-            cube([600,600,50]);
-    }
-}
-
-
-//cube([600,600,0.1]);
-//difference(){
-//    
-//surface(file = "Logo.png", center = false);
-
-//}

RackCabinets/SmartThings/SmartThings Hub v2.scad

@@ -1,115 +0,0 @@
-include<../sixinch_library.scad>
-
-
-  ///////////////////////////////
- // SmartThing Hub v2         //
-///////////////////////////////
-
-print_frontplate_sml = false;
-print_handle_sml     = false;
-print_cabinet_sml    = 0;
-print_lid            = 0;
-print_rear           = 1;
-model                = 0;
-
-units = 3;
-depth = 140;
-
-module model() {
-    rotate([-90,0,0]){
-        translate([22, -135, 4])
-          difference(){
-            union(){
-                color([1,1,1]) {
-                 fillet = 20;
-                    linear_extrude(height = 34)
-                    translate([fillet,fillet,0]){
-                        offset(r=fillet) {
-                            square([110 - 2* fillet, 126 - 2*fillet]);
-                        }
-                    }
-                }
-            }
-            color([0.5, 0.5, 0.5]) 
-            union() {
-                translate([67, -1, 10]) 
-                    cube([15.5, 16, 13]);
-                
-                translate([25,-1,15])
-                    rotate([270,0,0])
-                        cylinder(15.5, 5, 5);
-            }
-            
-          }
-      }
-}
-
-
-if(print_frontplate_sml){ // Frontplate //
-    square_hole        = [];
-    round_hole         = [];
-    round_peg          = [];   
-    screw_side_front   = [];
-    screw_top          = [36];
-    screw_bottom_front = [36];
-    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
-
-}
-
-if(print_handle_sml){ // Handle // 
-    lay_flat_for_print = false;   
-    handle(units,lay_flat_for_print);
-}
-
-if(print_cabinet_sml){ // Cabinet //  
-    w=88;
-    h=70;
-    screw_bottom_front = [36];
-    screw_side_front   = [];
-    round_peg          = [
-        [25,  8, 15, 0, 15],  // Pillar in front
-        [85,  8, 15, 0, 15],  // Pillar in front
-                              
-        [5,   80, 10, 0, 15],  // Pillar to the near right
-        [5,  120, 10, 0, 15],  // Pillar to the far right
-
-        [105, 80, 10, 0, 15],  // Pillar to the near left
-        [105, 120, 10, 0, 15],  // Pillar to the far left
-
-        [55,  70, 45, 0,  8],  // Pillar under the switch
-    
-    ];
-    difference() {
-        cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front, true);
-        model();
-    }
-}
-
-if(print_lid){ // Lid // 
-    screw_front = [36];//mm
-    screw_back  = [36];//mm
-    remove = true;
-    difference () {
-        lid(depth, units, screw_front, screw_back, true);        
-        model();
-    }
-}
-
-if(print_rear){  // Back plate //    
-    square_hole  = [
-        [71.5, 13, 15.5, 13],
-    ];
-    round_hole   = [
-        [25.5, 19, 10, 13]
-    ];
-    screw_top    = [36];//mm
-    screw_bottom = [36];//mm
-    screw_side   = [];
-    back_plate(units, depth, screw_top, screw_bottom, screw_side, square_hole,round_hole);
-}  
-
-
-// EdgeRouter X model
-if(model) {
-  model();
-}

RackCabinets/sixinch_library.scad

@@ -155,9 +155,9 @@ module nuttrap(){
 
 
 
-module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle=false){
+module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front){
     difference(){
-        box(dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle);
+        box(dp,u,screw_bottom_front,round_peg,screw_side_front);
 
                translate([20,unit/2+3,sixinch-40]){ cylinder(d=gauge_box,h=41);}
                translate([20,unit/2+0,sixinch-40]){ cylinder(d=gauge_box,h=41);}
@@ -176,7 +176,7 @@ module cabinet (dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middl
 
 
 
-module box(dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle){
+module box(dp,u,screw_bottom_front,round_peg,screw_side_front){
 
 /* RaspberryPi3ModelBHifiBerry */
 /* difference(){ */
@@ -218,7 +218,7 @@ module box(dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle){
     translate([20+gauge_box,unit*u-gauge_box,gauge+dp-10-10]){rotate([0,0,-90]){screwtrap();}}
     translate([sixinch-20-gauge_box,unit*u-gauge_box,gauge+10+10]){rotate([180,0,-90]){screwtrap();}}
     translate([sixinch-20-gauge_box,unit*u-gauge_box,gauge+dp-10-10+10]){rotate([180,0,-90]){screwtrap();}}
-    if(dp>90 && !remove_middle){
+    if(dp>90){
         translate([sixinch-20-gauge_box,unit*u-gauge_box,gauge+dp/2-5+10]){rotate([180,0,-90]){screwtrap();}}
         translate([20+gauge_box,unit*u-gauge_box,gauge+dp/2-5]){rotate([0,0,-90]){screwtrap();}}
     }
@@ -278,7 +278,7 @@ module box(dp,u,screw_bottom_front,round_peg,screw_side_front, remove_middle){
 
 }
 
-module lid(dp,u,screw_front,screw_back, remove_middle=false){
+module lid(dp,u,screw_front,screw_back){
 
     difference(){
     union(){
@@ -313,8 +313,8 @@ module lid(dp,u,screw_front,screw_back, remove_middle=false){
     translate([sixinch-20-gauge_box-4,unit*u+0.01   ,gauge+10+10-5]){rotate([90,0,0]){screw();}}
     translate([sixinch-20-gauge_box-4,unit*u +0.01  ,gauge+dp-10-10+10-5]){rotate([90,0,0]){screw();}}
     if(dp>90){
-        if(!remove_middle){
         translate([sixinch-20-gauge_box-4,unit*u+0.01   ,gauge+dp/2-5+10-5]){rotate([90,0,0]){screw();}}
+        if(!remove){
              translate([20+gauge_box+4,unit*u+0.01   ,gauge+dp/2-5+5]){rotate([90,0,0]){screw();}}
         }
     }