Add cabinet for EdgeRouter X

RackCabinets/Edge Router X/EdgeRouter X.scad

@@ -0,0 +1,104 @@
+include<../sixinch_library.scad>
+
+
+  ///////////////////////////////
+ // Edgerouter X              //
+///////////////////////////////
+
+print_frontplate_sml = false;
+print_handle_sml     = false;
+print_cabinet_sml    = false;
+print_lid            = false;
+print_rear           = true;
+model                = false;
+
+units = 3;
+depth = 98;
+
+module model() {
+    rotate([-90,0,0]){
+        translate([22, -99, 8])
+          difference(){
+            union(){
+             color([1,1,1]) cube([110, 75, 22]);    // EdgeRouter X model
+            }
+            translate([9, -1, 6]) 
+                color([0.5, 0.5, 0.5]) 
+                    union() { // RJ45 ports
+                        translate([0* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
+                        translate([1* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
+                        translate([2* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
+                        translate([3* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
+                        translate([4* (15.5 + 3.5), 0, 0]) cube([15.5, 16, 13]);
+                    }
+          }
+      }
+}
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+
+}
+
+if(print_handle_sml){ // Handle // 
+    lay_flat_for_print = false;   
+    handle(units,lay_flat_for_print);
+}
+
+if(print_cabinet_sml){ // Cabinet //  
+    w=88;
+    h=70;
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [
+        [20,  20, 15, 0, 15],  // Pillar in front
+        [90,  20, 15, 0, 15],  // Pillar in front
+                              
+        [5,   80, 10, 0, 15],  // Pillar to the near right
+    
+        [105, 80, 10, 0, 15],  // Pillar to the near left
+    
+        [55,  50, 45, 0,  8],  // Pillar under the switch
+    
+    ];
+    difference() {
+        cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
+        model();
+    }
+}
+
+if(print_lid){ // Lid // 
+    screw_front = [36];//mm
+    screw_back  = [36];//mm
+    difference () {
+        lid(depth, units, screw_front, screw_back);        
+        model();
+    }
+}
+
+if(print_rear){  // Back plate //    
+    square_hole  = [
+        [9 + 0 * (15.5 + 3.5), 12, 15.5, 13],
+        [9 + 1 * (15.5 + 3.5), 12, 15.5, 13],
+        [9 + 2 * (15.5 + 3.5), 12, 15.5, 13],
+        [9 + 3 * (15.5 + 3.5), 12, 15.5, 13],
+        [9 + 4 * (15.5 + 3.5), 12, 15.5, 13],
+    ];
+    round_hole   = [];
+    screw_top    = [36];//mm
+    screw_bottom = [36];//mm
+    screw_side   = [];
+    back_plate(units, depth, screw_top, screw_bottom, screw_side, square_hole,round_hole);
+}  
+
+
+// EdgeRouter X model
+if(model) {
+  model();
+}

RackCabinets/Philips Hue/Philips Hue_cabinet.scad

@@ -0,0 +1,115 @@
+include<../sixinch_library.scad>
+
+
+  ///////////////////////////////
+ // Philips Hue gen 2         //
+///////////////////////////////
+
+print_frontplate_sml = false;
+print_handle_sml     = false;
+print_cabinet_sml    = false;
+print_lid            = true;
+print_rear           = false;
+model                = false;
+
+units = 3;
+depth = 100;
+
+if(print_frontplate_sml){ // Frontplate //
+    square_hole        = [];
+    round_hole         = [];
+    round_peg          = [];   
+    screw_side_front   = [];
+    screw_top          = [36];
+    screw_bottom_front = [36];
+    frontplate(units,square_hole,round_hole,round_peg,screw_side_front,screw_top,screw_bottom_front);
+
+}
+
+if(print_handle_sml){ // Handle // 
+    lay_flat_for_print = false;   
+    handle(units,lay_flat_for_print);
+}
+
+if(print_cabinet_sml){ // Cabinet //  
+    w=88;
+    h=70;
+    screw_bottom_front = [36];
+    screw_side_front   = [];
+    round_peg          = [
+        [20,  10, 15, 0, 15],  // Pillar in front
+        [80,  10, 15, 0, 15],  // Pillar in front
+                              
+        [10,  30, 10, 0, 15],  // Pillar to the near right
+        [10,  80, 10, 0, 15],  // Pillar to the far right
+    
+        [99,  30, 10, 0, 15],  // Pillar to the near left
+        [99,  80, 10, 0, 15],  // Pillar to the far left
+    
+        [55,  50, 50, 0,  8],  // Pillar under the switch
+    
+    ];
+    difference() {
+        cabinet(depth,units,screw_bottom_front,round_peg,screw_side_front);
+        rotate([-90,0,0]){
+            translate([32.5, -101, 8])
+                cube([91.5, 91.5, 26]);    // Philips Hue model
+          }
+    }
+
+}
+
+if(print_lid){ // Lid // 
+    screw_front = [36];//mm
+    screw_back  = [36];//mm
+    difference () {
+        union(){
+            lid(depth, units, screw_front, screw_back);     
+            rotate([-90,0,0])
+                translate([77.5, -56, 40.15])
+                    cylinder(2, r=45/2, center=false);   
+        }
+        
+        rotate([-90,0,0]){
+            translate([27.5, -156, 8])
+                union(){
+                    cube([91.5, 91.5, 26]);    // Philips Hue model
+                    translate([5 + 45.75, 55+45.75 ,20])
+                        cylinder(100, r=35/2, center=false);
+                }
+            
+        }
+    }
+}
+
+if(print_rear){  // Back plate //    
+    square_hole  = [[63.5, 9, 15, 14]];
+    round_hole   = [[43,19,10]];
+    screw_top    = [36];//mm
+    screw_bottom = [36];//mm
+    screw_side   = [];
+    back_plate(units, depth, screw_top, screw_bottom, screw_side, square_hole,round_hole);
+}  
+
+
+// Philips Hue model
+if(model) {
+  rotate([-90,0,0]){
+    translate([32.5, -101, 8])
+      difference(){
+        union(){
+            color([1,1,1]) 
+                cube([91.5, 91.5, 26]);    // Philips Hue model
+            translate([45.75, 45.75 ,20])
+                cylinder(100, r=35/2, center=false);
+        }
+        translate([ 55, -1, 4]) 
+            color([0.5, 0.5, 0.5]) 
+                cube([14, 16, 14]);       // RJ45 ports
+        translate([ 29, -1,  13]) // Power jack
+            rotate([90,0,0])
+                color([0.5, 0.5, 0.5]) 
+                    cylinder(10,5,5,true);
+      }
+  }
+}