Add configuration for esphome

hs-elevator.yaml

@@ -0,0 +1,65 @@
+esphome:
+  name: hs-elevator
+  friendly_name: hs-elevator
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+uart:
+  tx_pin: 1
+  rx_pin: 3
+  baud_rate: 9600
+
+dfplayer:
+
+binary_sensor:
+  - platform: gpio
+    pin: 25
+    id: button
+    on_click: 
+      then:
+        - switch.toggle: light_relay
+  - platform: gpio
+    id: lock_status
+    pin: 14
+    on_release: 
+      then:
+        - switch.turn_on: fan_relay
+        - delay: 5min
+        - if:
+            condition:
+              - binary_sensor.is_off: lock_status 
+            then:
+              - switch.turn_off: fan_relay
+
+switch:
+  - platform: gpio
+    id: light_relay
+    pin: 26
+    on_turn_on: 
+      then:
+        - dfplayer.play_folder: 
+            folder: 1
+            loop: true
+        - switch.turn_off: down_led 
+        - switch.turn_on: up_led
+    on_turn_off: 
+      then:
+        - dfplayer.stop
+        - switch.turn_off: up_led
+        - switch.turn_on: down_led
+  - platform: gpio
+    id: fan_relay
+    pin: 27
+  - platform: gpio
+    id: up_led
+    pin: 32
+  - platform: gpio
+    id: down_led
+    pin: 33
+