esphome:
  name: hs-elevator
  friendly_name: hs-elevator

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

uart:
  tx_pin: 1
  rx_pin: 3
  baud_rate: 9600

dfplayer:

binary_sensor:
  - platform: gpio
    pin: 25
    id: button
    on_click:
      then:
        - switch.toggle: light_relay
  - platform: gpio
    id: lock_status
    pin: 14
    on_state:
      then:
        - dfplayer.play_folder:
            folder: 1
            loop: true
    on_release:
      then:
        - dfplayer.stop
        - switch.turn_on: fan_relay
        - delay: 5min
        - if:
            condition:
              - binary_sensor.is_off: lock_status
            then:
              - switch.turn_off: fan_relay

switch:
  - platform: gpio
    id: light_relay
    pin: 26
    on_turn_on:
      then:
        - switch.turn_off: down_led
        - switch.turn_on: up_led
    on_turn_off:
      then:
        - switch.turn_off: up_led
        - switch.turn_on: down_led
  - platform: gpio
    id: fan_relay
    pin: 27
  - platform: gpio
    id: up_led
    pin: 32
  - platform: gpio
    id: down_led
    pin: 33