This allows us to identify module by their type and it is also better to
store the module type as part of the module instead of having it
hardcoded in factory.hpp
Action strings now have the form '#MODULE#ACTION'
For example to trigger the action 'toggle' in the 'module/date' module
one would now use '%{A1:#date#toggle:}'
With this action strings can now be uniquely assigned to one module.
Fixes#1172
ramp-0 is used for everything <= base-temperature and ramp-N is used for everything >= warn-temperature
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* Fix minor error
* explicitly check percentage in get_by_percentage_with_borders
* Fixed silly error
Any timer_module based module would sleep for the set interval and then
continue running. Depending on the start time of polybar this
sleep pattern might not be aligned, which causes such modules to always
update in a shifted manner.
Consider the date module as an example. If the update interval is set to
60 seconds and polybar was started at 13:37:37, polybar would update the
clock at 13:38:37, 13:39:37 and so on.
To make matters worse, if a module would perform lengthy checks this
interval might drift over time, causing even more inconsistent updating.
This patch extends the base module with a sleep_until method that calls
the corresponding function on the sleephandler. Additionally the
timer_module is extended to compute the remaining time until the next
interval passes and sleep accordingly.
Closes#2064
Co-developed-by: Dominik Töllner <dominik.toellner@stud.uni-hannover.de>
Co-authored-by: Malte Bargholz <malte@screenri.de>
If an input is enqueued as a response to an input, the new input will be
swallowed because it will likely be enqueued less than 30ms after the
original event.
This is not something that is an issue right now but it is required to
finish #1907 where, in order to close the menu after a click, the menu
module gets an exec action that closes the menu and adds a command to
the event queue.
The setting also isn't too useful since it will just break polybar input
handling if inputs arrive too fast instead of (possibly) slowing down
the bar.
Before the module would just try to evenly distribute desktops
(workspaces) among the viewports.
But since `_NET_DESKTOP_VIEWPORT` actually maps desktops to viewports,
we can use that information to assign workspaces to the right viewport.
Fixes#1849Fixes#1764
A warning implies something went wrong and (possibly) the user should do
something about it. However, warnings are not always used this way.
For example:
* When a fallback value for a `${..}` reference is used, this shouldn't
produce a warning (or notice) since using fallbacks is not something
bad.
* pulse telling you that it uses the default sink because no sink was
specified also does not warrant a warning (even notice may be too
high).
* Whenever polybar shuts down it produces a "Termination signal
received..." warning. Since there isn't a more proper way to shut down
polybar, it should not produce a warning. Same argument for a
`screenchange-reload`
Before it would only reload if the size changed and even that was
reliable since the method relied on the order of the monitor list.
Now if the monitor list differs in any way (pos, dimension, primary,
output, name) a reload is issued
Because of how monitors are removed inside the loop and depending on the
monitor order a cloned monitor may be assigned a width of 0 but is never
actually removed resulting in polybar saying the bar is out of bounds
Fixes#1794
Premature optimization that tried to cache monitors but the cache did
not take into account the parameter values.
The call `get_monitors(..., ..., false, true);` would get all connected
and unconncected monitors a subsequent call
`get_monitors(..., ..., true, false);` would get back the same list of
monitors even though it requested only connected monitors.
Additionally `get_monitors` is never called periodically so the
optimization really didn't help much.
The github module only authenticate by query string, and this method is deprecated:
https://developer.github.com/changes/2019-11-05-deprecated-passwords-and-authorizations-api/#authenticating-using-query-parameters
There is no reason to remove it before the method stop working, so I've made possible to the user choose which authentication method he will use:
* The parameter token remain unchanged.
* If the parameter user is passed then the module will use the not deprecated method, passing user and token on the body of the requisition. Otherwise the module will use the deprecated method.
Co-authored-by: Lucas <araujo.lucasvale@gmail.com>
Fixes#2002
Adds `format-offline` and `label-offline`
* feat(github): offline label & fixes
* Clear label if there are no notifications and empty-notifications = false
* clang-format
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
This is dependent on a PR to xpp that does the same. Newer compilers
(GCC10 in particular) are stricter about which headers provide the
std exception types.
the `node` and `node_repeat` were never called with the optional
parameter add_space. And its default value is false, so the
corresponding code was never used.
I think in general it is better to just have the user of those functions
call `builder::space` when they need to instead of adding more
complexity to the `node*` functions.
* Add label minlen and alignment.
Fix build
* Update src/drawtypes/label.cpp
Co-Authored-By: infokiller <infokiller@users.noreply.github.com>
* Use existing alignment type.
* Remove redundant max_len handling in label::get.
* Fix shadowing.
* Add label alignment tests.
* Handle minlen/maxlen and alignment in same function.
Also add a test for a test case brought up in the PR discussion.
* Format files with clang-format
* Move builder::get_label_text tests into label tests
builder::get_label_text doesn't really do anything anymore
* builder: remove get_label_text
* label: Clean up label::get()
* Fix comment style.
* Set default label alignment to left.
* Update src/drawtypes/label.cpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
* Update include/drawtypes/label.hpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
None of the payload fields seem to be used. They were the only place
where EVENT_SIZE was used and why it had to be a macro (no variable
length arrays).
Since APP_VERSION is different for every commit and almost all file
include settings.hpp, the whole project has to be rebuilt for every
commit. With this, hopefully, this can be greatly reduced and only
changed files need to be rebuilt. This will also help ccache
Some people use text modules instead of the `separator` key in the bar
section to better configure the separator (colors, fonts).
Since we disallowed the same module being used multiple times in #1534,
this will now print an error message.
This should help with this a bit.
Ref #1913
Since all of polybar is built at once, there is no chance that this is
ever linked to an object that was compiled with another `-std=`
Ref: https://stackoverflow.com/a/46857525/5363071
Some WMs like i3 discard position information when unmapping the bar and
because of that the bar would be at the wrong position after being
remapped.
Fixes#1484
Ref: https://github.com/i3/i3/pull/3834
* refactor: Use flat module list if possible
Before if you wanted to iterate over all loaded modules you had to first
iterate over all blocks and then over their modules even if you didn't
care about alignment.
* refactor: setup modules in separate function
* controller: Print error for duplicate modules
You can't use the same name twice inside the module lists
E.g.
modules-left = a b c
modules-center = a
modules-right = b
would print an error.
We only print an error for now because we don't want to break existing
configs. But in the future this should be properly enforced.
A workspace is occupied if it is not active and there is at least one window managed by the WM (`_NET_CLIENT_LIST`) that has set `_NET_WM_DESKTOP` to that workspace.
The behavior when `_NET_WM_DESKTOP` is not set is not yet clear but this is unlikely to happen since most WMs will position windows on some desktop.
Closes#874Fixes#1444Fixes#1033
* Set Desktop OCCUPIED if a window moves there
This covers more of an edge-case. I did this first by accident, it might
vanish later on.
* Replace tracking change of WS with currently used WS
* Untrack occupied workspaces
* Track windows and their desktops in pairs
* Match type of occupied_desktops with current_desktop
Because the index needs to be matched later on, type mismatches would be non-ideal.
* Recreate the occupied desktops everytime and remove duplicates
* Readd support for moving windows to other desktops
* Use less characters to empty the vector
* Rename variable storing the desktops
* Recount windows on every occasion
This alone simplifies the management and the lookup for occupation of a
workspace
* Keep track of number of windows in every workspace
* Add debugging output that shall be removed before merging
* Remove obsolete TODO
* m_client_list should always be diff'd, since the desktop may change
Therefore we update the desktop-count tally every time the client_list
changes. It may just be a desktop-change without a change of
clients.size()...
* Add more logging-spam to understand window/desktop lifecycle
* Lock event-handler to serialize handling of events
* Fix occupied workspace counting and change to bool array
Also, performance improvements when diffing new and old client lists
* Fix crash when all clients are removed
* Conform to linter and styleguide
* Shorten conditional as it is standard enough
Since this only guards against 0-divisions, it can be shortened
without risking too much confusion down the road.
* Guard against multiple threads accessing and modifying data
Fixes#1444
Modification of internal data happens through the handle-method, while
the build-method tries to access the data structures for display. Since
some modifications clear e.g. the m_viewports, references may become
invalid between looping over them an accessing them.
The mutex should guard against this simultanuous access.
* Do not 'adopt_lock', because calls come from very different threads
To my understanding, adopt_lock has some dependency on the mutex-ownership. Since
the lock is once called from the inside (in handle) and once from the outside (in
build), there might be a problem. After brief testing, the segfaults happened fewer
times.
See #1444
* Also listen to _NET_WM_DESKTOP
In order to move a window from one desktop to another, it is sufficient
to set the desktop-property of that window. xmonad fires a lot of events
in the case of moving a window, herbstluftwm only updates the
_NET_WM_DESKTOP-atom of the window.
This change reloads the clientlist in order to correctly set the
desktop state "occupied".
* Describe need and use of mutex
It might be possible to relieve the guard in xworkspaces_module::handle,
but I am unsure about this. Since xmonad emits a lot of events on almost
every minor change, I would let the guard keep its post, avoiding
race-conditions in event-handling.
* Give temporary variables better names
* Clarify purpose of loop
About 80% of this comment are taken from
https://github.com/jaagr/polybar/pull/882#discussion_r255317363
* Remove merge-remainder
* Use a simpler method to list occupied desktops.
Co-authored-by: Jérôme Boulmier <jerome.boulmier@outlook.fr>
* Document m_clients field
The %{PR} tag is introduced for this. It resets all colors as well as
the activation of the underline and overline and font.
This has become necessary because we don't track what raw tags a user
injects into the formatting string and otherwise their raw tags could
bleed through.
This doesn't touch action tags because even before raw action tags
weren't being tracked. Action tags also have the requirement that they
have to be used in pairs, so closing them prematurely could break things
(for example with click actions for the entire bar)
Using a bit vector to track the active attributes does not really give a
significant speed increase, especially for only two attributes
Checking if a syntaxtag or an attribute exists in the map just adds
unnecessary code
Was around since the first commit but no documentation why. It was only
used in the text module and doesn't appear in any public documentation,
so this doesn't break anything.
This is the next step to merge #1237 in stages.
Currently there are barely any restrictions on how the config can be
written. This causes things like config files with DOS line endings to
not be parsed properly (#1366) because polybar splits by `\n` and when
parsing section headers, it can't deal with the `\r` at the end of the
line and thus doesn't recognize any section headers.
With this PR we introduce some rules as to what characters are allowed
in section names and keys.
Note: When talking about spaces I refer to any character for which
`isspace()` returns `true`.
The rules are as follows:
* A section name or a key name cannot contain any spaces as well as any
of there characters:`"'=;#[](){}:.$\%`
* Spaces at the beginning and end of lines are always ignored when
parsing
* Comment lines start with `;` or `#` and last for the whole line. The
whole line will be ignored by the parser. You cannot start a comment at
the end of a line.
* Section headers have the following form `[HEADER_NAME]`
* Key-value lines look like this:
`KEY_NAME{SPACES}={SPACES}VALUE_STRING` where `{SPACES}` represents any
number of spaces. `VALUE_STRING` can contain any characters. If it is
*surrounded* with double quotes (`"`), those quotes will be removed,
this can be used to add spaces to the beginning or end of the value
* Empty lines are lines with only spaces in them
* If the line has any other form, it is a syntax error
This will introduce the following breaking changes because of how
underdefined the config syntax was before:
* `key = ""` will get treated as an empty string instead of the literal
* string `""`
* Any section or key name with forbidden characters will now be syntax
errors.
* Certain strings will be forbidden as section names: `self`, `root`,
* `BAR`. Because they have a special meaning inside references and so a
* section `[root]` can never be referenced.
This replaces the current parser implementation with a new more robust
one that will later be expanded to also check for dependency cycles and
allow for values that contain references mixed with other strings.
This PR also now expands the config paths given over the command line so
that `--config=~/.config/polybar/config` resolves properly.
Closes#1032Closes#1694
* config_parser: Add skeleton with tests
First step in the config_parser develoment. Only tests functions that
are easily testable without many outside dependencies. Integration tests
will follow.
* config_parser: Implement parse_header
* config_parser: Implement get_line_type
* feat(string): Add trim functions with predicate
Not only trimming based on single character matching but based on a
freely specifiable predicate. Will be used to trim all spaces (based on
isspace)
* config_parser: Implement parse_key
* config_parser: Implement parse_line for valid lines
* config_parser: Throw exception on invalid lines
* config_parser: Remove line_no and file_index from parse_line
Cleaner to let the caller catch and fill in the line number and file
path
* string: Clear up misleading description of trim
Before, trim would remove all characters that *didn't* match the
predicate and thus the predicate isspace wouldn't work correctly. But
because we used the inverse (isnospace_pred) it all worked out, but if
the function was used with any other function, it wouldn't have given
the desired output
* config_parser: Implement parse_file
* config_parser: Switch operation to config_parser
This changes the way the config is invoked. Now main.cpp creates a
config_parser object which then returns the singleton config object from
the parse method. Subsequent calls to config::make will return the
already created config object as before
The config_parser does not yet have all the functionality of the old
parser: `inherit` directives are not yet resolved. Other than that all
the old functionality is implemented (creating sectionmap and applying
include-file)
Any sort of dependency detection (except for include-file) are still
missing
* config: Move xrm initialization to constructor
config_parser handles the detection of xrdb references and passes that
info to the config object.
This finally allows us to delete the config::parse_file function because
everything in it has been implemented (except for xrdb detection and
file error handling)
* refactor(config_parser): Cleanup
* config_parser: Set config data after initialization
Looks much cleaner this way
* config_parser: Expand include-file paths
* config_parser: Init xrm if the config uses %{xrdb references
* config_parser: Use same type of maps as in old impl
Polybar has some weird, not yet fixed, inheriting behaviour and it
changes depending on the order in which the config stores its data.
Using the same type of maps ensures that the behaviour stays the same.
* refactor(config_parser): Clearer invalid name error message
* config_parser: Don't allow reserved section names
Sections with the names 'self', 'BAR', 'root' could never be referenced
because those strings have a special meaning inside references
* config_parser: Handle inherit directives
This uses the old copy_inherited function, so this still suffers from
crashes if there are cyclic dependencies.
This also fixes the behaviour where any key that starts with 'inherit'
would be treated as an inherit directive
* config_parser: Clearer dependency cycle error message
* refactor(config_parser): Handle file errors when parsing
This removes the need to check if the file exists separately
* fix(config): expand config file path
Now paths using ~ and environment variables can be used as the config
path
* fix(config): Properly recognize xrdb references
* config_parser: Make messages more informative
* doc(config): Improve commenting
Comments now describe what the config_parser actually does instead of
what it will do.
We also now follow the rule that single line comments inside functions
should use `//` comments
* refactor: Move else on same line as curly braces
* fix(config_parser): Don't duplicate paths in `files`
* refactor(config_parser): Use else if for clarity
* fix(config): Undefined behavior in syntax_error
Before the custom what() method produced undefined behavior because the
returned string became invalid once the function returned.
* refactor(config): descriptive name for useless lines
is_valid could easily be confused as meaning syntactically invalid
without it being clarified in a comment
* refactor(config): Use separate strings instead of key_value
Takes just as much space and is much better to read
* fix(config_parser): TestCase -> TestSuite and fix macro call
Ref: #1644
* config_parser: use const string& in method args
* config_parser: Improve comments
* config_parser: Incorporate review comments
Originally the size function returned the scaled `size` property for
scalable fonts and the non-scaled `pixelsize` property for non-scalable
fonts. This caused lots of issues when that property was 0 (empty bars,
characters not drawn without warning, see references at the bottom).
This behavior was mostly observed on debian where `size` is set to 0 if
`pixelsize` is set.
We now try to use both properties for both types, but prefering `size`
for scalable fonts and `pixelsize` for non-scalable ones.
This behavior doesn't break existing correct behavior but now never
returns 0. It will always try to fall back to the other property or to
some fallback value if both properties are 0.
I originally thought this could also make font patterns more expressive
by being able to specify the size of scalable fonts directly in pixels
like so:
Unifont:size=0:pixelsize=20
or to scale non-scalable fonts by forcing polybar to fall back to the
`size` property (which is always scaled):
Wuncon Siji:pixelsize=0:size=20
But how these two patterns are matched by `fc-match` depends both on the
font and on the distro/fontconfig setup.
Ref #706
Ref #1450
Ref #1257
I don't know the original intention behind this but it clutters up debug
traces and basically makes ccache useless.
The only benefit it has, giving version info in stacktraces, is kind of
void since we already ask for version information on github issues.
Displays real percentage instead of being set to 100 if percentage > full-at
* battery: added percentage_raw token, which ignores full-at
* battery: current_percentage returns raw, added clamping function instead
* battery: clamp percentage used by build()
Made clamp_percentage() const to allow its usage inside build()
* battery: read and return percentage in one line
Fixes compilation under GCC 9
The default copy constructor implicit generation is deprecated by C++ standard.
The window& operator=(const xcb_window_t win); operator seems to be useless.
Fixes#1728
Ref jaagr/xpp#16
We need to have the version string available in multiple places not just
the source code. It is now hardcoded in the root CMakeLists.txt and all
files that need it will be configured with cmake.
This also removed the unecessary duality of GIT_TAG and APP_VERSION and
GIT_TAG_NAMESPACE and APP_VERSION_NAMESPACE.
tray_client class contains a reference so copy assignment operator is implicitly deleted.
the dtor unembed the window so copying the class could lead to bug so the copy ctor is also deleted.
Fixes#1674
* `layout-icon-*` list that maps layouts to icons.
* `indicator-icon-*` list that maps indicators to off and on icons
* `label-indicator-off`
* `label-indicator-on` which replaces the now deprecated `label-indicator`
* `label-indicator-[on|off]-*` for each indicator. Overrides `label-indicator-on` and `label-indicator-off`
Fixes#1558Closes#1048
* add icon support for xkeyboard layouts
* removed unneeded #include
* add sperate %icon% token that can be used in <label-layout>
* removed unneeded #include
* added caps lock indicator (was mentioned in wiki, but not actually implememnted) and support for indicator icons
* a few more fixes to make sure existing user configs are not broken
* ready to go
* Added an option to replace xkb indicator names
* Added labels for each indicator state
* Removed print left on accident
* Fixed review comments
* Update src/modules/xkeyboard.cpp
Co-Authored-By: Gilnaa <gilad@naaman.io>
If any signal receiver throws an exception for any reason after
receiving a signal, no one would find out about it because the signal
emitter just ignored exceptions
Also actually delivering the signal caused some exceptions because not
all signals have a receiver.
Resolves#1593
Polybar had issues when there is no background set or set by a tool like imagemagick which doesn't add the root pixmap to the root window properties.
There's not much we can do about it, but at least polybar doesn't crash anymore.
Fixes#1582Fixes#1585
* fix(tray_manager): only enable transparency if neccessary
Previously, we always enabled transparency
* fix(background_manager): avoid needless fetching
* fix(renderer): move logging message to correct place
* fix(background_manager): handle dummy pixmap (_XSETROOT_ID) right
* fix(background_manager): more initialization + don't free on error
Freeing on error is incorrect, since we could still be called again later in
which case we still need the resources.
* fix(background_manager): add more infos to trace logs
* fix(background): correct typo (XROOTMAP -> XROOTPMAP)
* fix(background_manager): do not report "no background" as error
* style(background_manager): use braces for if
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* fix(background_manager): better error message for dummy pixmap
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* style(background): some more style fixes
* fix(connection): initialize pixmap in all cases in root_pixmap()
* style(connection): improve readability using early return
This adds `monitor-exact = true` in the bar section
This also properly does best-match instead of first-match if multiple
matches exists. For example if there are two monitors HDMI2 and HDMI-2
and we try to match HDMI-2 with monitor-exact = false, until now HDMI2
would be matched. Now exact matches are always preferred.
Fixes#1532
This adds a new label in the bspwm module `label-marked`
This flag for focused nodes of a focused desktop was introduced in [1]
and released with bspwm 0.9.4
It adds the `M` flag to `G` type items in bspwm's report format
Resolves#1552
[1]: d0138af475
This patch adds support for observing multiple slices of the desktop background.
This is used for the tray so that it doesn't have to rely on the bar's rect to
get the desktop background. In particular, it now handles the case where the
tray is not contained fully within the bar's outer rect (for example, when using tray-offset-{x,y})
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
### Breaking Changes:
None
### Changelog
**New Config Options**
The following config options were added
In the `[settings]` section:
* `pseudo-transparency`
In `internal/cpu`:
* `ramp-coreload-spacing`, spacing between elements in `<ramp-coreload>` elements
* `%percentage-sum%` in `label`. Shows sum of all percentages
In `custom/script`:
* `double-click-left`
* `double-click-middle`
* `double-click-right`
In `internal/pulseaudio`:
* `interval`, volume increase and decrease steps in percentage points
In `internal/memory`:
* `bar-swap-used`
* `bar-swap-free`
* `ramp-swap-used`
* `ramp-swap-free`
**Deprecations**
* `tray-transparent` in the bar section is no longer used. The tray now always uses pseudo-transparency
**Features**
* volume: adjustable volume steps (#1364), see #1361
* memory: Add progress bars and ramps for swap (#1325)
* render: pseudo-transparency (always used in the tray) (#595)
* cpu:
* Configurable spacing in between coreloads (#1472), see #1389
* Non-normalized cpu load (#1517), see #1516
* script: Double click actions (#1442)
* net: Support for bridge interfaces (#1528), see #1522
* token: zero pad tokens when min-width value starts with a `0` (#1341), see #1332
**Fixes**
* config: Use font patterns detected on system in sample config (#1350)
* net: Disconnected module when SSID is only an emoji (#1371), see #1367
* tray: Tray overlapping with bar (#1392), see #591
* build: Several build errors (#1395, #1454, #1470, jaagr/xpp#12, #1493), see #1447, #1469, #750, #1492
* mpd: format-online-prefix not working (#1402), see #1399
* font: Crash for some font-patterns (#1451), see #1435
* script:
* Only `%counter%` or `%pid%` token usable, never both (#1456)
* click actions with colons in them (#1457), see #984
* renderer: Bar locks up when xorg composite extension is disabled (#1430), see #1425
The previous approach relied on manually updating the version and date
using a Makefile
This approach dynamically gathers the correct version from git and uses
the date of the latest commit in the branch
* Clean up CMake logic
- removed logic to find CppUnit (no longer used)
- removed "dirs" variable used to pass include directories
- removed add_library function (no longer used)
- removed make_executable function
* only used in 2 places (polybar and polybar-msg)
* it was more general than needed, logic is simpler without it
- split polybar into static library and executable
* this allows linking unit tests to the library
* rename library
* add coverage build
- Added a CMake build type "Coverage" that builds C and C++
code with the "--coverage" flag (recognized by both GCC and Clang)
- removed "-Wno-missing-field-initializers" from test flags,
since it didn't seem to be needed any more
- removed logic from tests/CMakeLists to disable "-Werror" and "-pedantic-errors"
since there didn't seem to be any warnings during the build
* fix whitespace
* update travis
* remove O2 from defalt flags
* allow tests to be built by default make target
* disable Werror for debug builds
If FcNameParse returns NULL FcDefaultSubstitute segfaults
We log and throw an error here because the signal emitter swallows all
exceptions so if that exception was thrown, the bar would stop rendering
without any indication as to why.
Fixes#1435
wireless_tools 29 redefines inline in iwlib.h as:
#define inline inline __attribute__((always_inline))
which conflicts with POLYBAR_NS, which is defined as:
#define POLYBAR_NS \
namespace polybar { \
inline namespace APP_VERSION_NAMESPACE {
In version 30.pre9 this #define is moved into a source file and thus
cannot conflict.
The error only occurs when building with clang, so it seems gcc and
clang handle this differently
Fixes#1492
We need to use positions relative to the position of the bar for indexing into
the background image slice, but the code used absolute ones.
This worked fine as long as absolute positions are the same as relative
positions (this is the case for a bar located at (0,0), so if bottom = false).
But for bottom bars (where the bar position is not (0,0)) this was wrong which
caused the tray background to be black (out of bounds for the background slice).
The systray only supports pseudo transparency (real transparency would require
much larger changes) so the real transparency should only be used for the bar itself.
We now take the bar position that the window manager gives us instead of trying
to calculate it ourselves. This is more correct when multiple bars are attached
to the same edge, as the window manager may move some of them in that
case (assuming override redirect is not enabled)
We need to fetch the outer area from the root window, not just the inner area
because we paint the background below the borders as well.
This has the nice effect of supporting semi-transparency for borders as well.
Now all the tokens in the memory module also have ramp and bar counterparts.
These can be used exactly the same as `bar-used` and `ramp-used`, they are named `<bar-swap-used>`, `<bar-swap-free>`, `<ramp-swap-used>`, and `<ramp-swap-free>`
Breaking Changes:
* `0 < label-NAME-maxlen < 3` will now throw an exception and disable the containing module, if ellipsis is enabled for that label. (#1198)
Changelog:
Deprecations:
* `internal/volume` is now called `internal/alsa` (#967)
* temperature: The `%temperature%` is deprecated in favor of `%temperature-c%`(#897)
* mpd: `icon-repeatone` is deprecated in favor of `icon-single` (#1295), see #1279
Features:
* feat(mpd): Add support for icon-consume (#861)
* feat(bspwm): Add workspace separator (#942)
* feat(i3): Add workspace separator (#938), see #929
* feat(build): Make polybar build on FreeBSD (#931, jaagr/xpp#8), see #239
* feat(volume): Add pulseaudio backend (#779)
* feat(script): Add %pid% token for tail commands (#934)
* feat(temp): Add temperature tokens without unit (#897)
* feat(memory): Add memory used/free ramp (#1038), see #1037
* feat(memory): Add swap tokens (#1018)
* feat(net): Add unknown-as-up option (#1077), see #457
* feat(config): Support fractional size and offset (#972), see #953
* feat(xwindow): Add label-empty (#1136)
* feat(battery): Add animation-discharging (analog to animation-charging) (#1190)
* feat(config): Support pixel offset for bar size and offset values (#1224)
* feat(mpd): Add `%album-artist%` token (#1263)
* feat(net): Add local_ip6 token (#1239), see #1234
* feat(net): Add nl80211 support (#1009), see #277
Fixes:
* fix(mpd): Wrong elapsed time when after standby (#921), see #915
* fix(config): Wrong min, maxlen when using the same token multiple times (#974), see #971
* fix(battery): use power_now correctly (#958), see #928
* fix(mpd): Crash when mpd isn't running (#983), see #979
* fix(xworkspaces): Respect 'enable-scroll' (#1002)
* fix(xbacklight): Respect 'enable-scroll' (#1014)
* fix(build): support xcb-proto >=1.13 (jaagr/xpp#11), see #973
* fix(mpd): Respect MPD_HOST env variable (#1025), see #1007
* fix(i3): Reconnect i3 IPC socket on restart/error (#1099), see #762
* fix(cursor): Occasional crash on mouseover (#1124), see #1117
* fix(net): Mark 'not connected' on querying failure (#1171), see #1163
* fix(gcc): Fix -Wstringop-truncation warning (#1216, jaagr/i3ipcpp#7), see #1215
* fix(builder): Don't truncate colors with same channels (#1217), see #1183
* fix(bspwm): Consistent behavior when scrolling through multiple desktops (#986), see #981
* fix(builder): Respect label-ellipsis option (#1198), see #1194
The check of the maxlen and ellipsis condition was also moved to the
label creation, this way get_label_text doesn't need to care about the
restrictions placed on maxlen and ellipsis
The repeatone button doesn't influence repeating behaviour at all, so
the name is misleading.
This deprecates icon-repeatone for now, until we can completely remove
it
Fixes#1279
This patch enables support for nl80211. In case the libnl-genl-3.0
library isn't found, it will fall back to Wext instead.
The library to use can also be manually set with the CMake option
WITH_LIBNL.
The Wireless-Extensions (WE or Wext) are deprecated and long replaced
by cfg80211.
Although Wext isn't used by WiFi drivers anymore, CFG80211_WEXT allows
old tools to communicate with modern drivers by providing a wrapper
API.
It's queried the same way ipv4 addresses are queried, but here it displays globally routable addresses. If there are multiple such addresses, it picks one (same as with ipv4). It's possible that an address discovered this way is not in fact globally reachable but still marked as global.
Using brace initialization here causes bar.hpp to not compile when
included on its own, forcing all clients to also include
tray_manager.hpp and so on, which defeats the purpose of forward
declaring those classes.
This also allows us to remove the tray_manager.hpp, renderer.hpp and
parser.hpp includes from the clients of bar.hpp
Only updating when an mpd event occurred would cause issues when mpd was
playing and the machine was put to sleep because the elapsed time was
calculated by taking the time difference of the last update and now
which would give you wrong numbers, if the machine was in standby in
between.
Since the update function on the module is only called once a second (or
when an event happens), we can just update the data every time without a
huge performance hit.
Fixes#915
Breaking Changes:
* Date module no longer supports non-padded specifiers (i.e. `%-d`) and potentially other specifiers, see #792
- Check http://en.cppreference.com/w/cpp/io/manip/put_time to see supported specifiers
* Setting background color to `background-0` with gradients (refer to https://github.com/jaagr/polybar/wiki/Known-Issues)
Changelog:
Features:
* Feat(mpd): State-specific formats (`format-playing`, `format-paused`, `format-stopped`) (#567), see #524
* Feat(ipc): Visibility commands (show, hide, toggle, restart, quit) (b6c5563)
* Feat(shell): Bash completion (#588)
* Feat(menu): `expand-right` option (#658), see #655
* Feat(temperature): hwmon sysfs support (#688), see #404
* Feat(cursor): Change cursors over clickable/scrollable areas (#727), see #721
* Feat(temperature): Fahrenheit and Celsius tokens (#804)
* Feat(mpd): Use mpd name tag or URI as fallback for title-less tracks (#823), see #815
Fixes:
* Fix(i3): Clicking workspaces without index (#521), see #520
* Fix(parser): Prefix options overriding format options (#729), see #544
* Fix(parser): Overline tags (eebf105)
* Fix(process_util): Prefix shell environment variable (`$POLYBAR_SHELL`) (86ff947), see #566
* Fix(parser): `%{R}` tag (reverse colors) (0bd8f1f), see #585
* Fix(renderer): Center block position with tray (389bae2 & #673), see #551 & #672
* Fix(xworkpaces): Active workspace with XMonad (#587), see #411 & #535
* Fix(config): Expand tilde, environment variable (d3b0670 & #724), see #603 & #719
* Fix(build): Remove curlbuild.h (#648), see #647
* Fix(renderer): Off by one error for actions (#663), see #661
* Fix(gcc): GCC 7.1 ([jaagr/xpp/#6](https://github.com/jaagr/xpp/pull/6))
* Fix(fs): Use `bytes_available` for `percentage_used` (138f5fa), see #710
* Fix(fs): Use `f_frsize` for calculations (a682d2a)
* Fix(date): Remove date string length limitation (#745), see #754
* Fix(renderer): Nested actions (#772), see #760 and #758
* Fix(i3): Check and warn if current workspace not found (#826), see #824
* Fix(github): Prevent module disappearing with no connection (#811), see #810
* Fix(renderer): Module gradients (#831), see #759
* Fix(build): Update deprecated jsoncpp Reader
expand-right defaults to true to preserve the current functionality
If set to false, the items in the menu will be added to the left of the
toggle label (instead of the right side)
Should resolve the issue discussed in #655
If the mouse was at the leftmost edge of the screen and there was an
action area from 0 to N, the click wouldn't register
Before if an action area was defined from A to B it was from A exclusive
to B inclusive now it is from A inclusive to B exclusive. This is the
same way that the pixel addresses work, since a pixel's coordinate is
defined by the top-left corner.
Fixes#661
When focusing a desktop with the urgent flag, two events are received
from `bspc` simultaneously, separated by a newline character.
This was not handled correctly and the second event was discarded causing
the urgent style to be removed, but the focused style would remain on the
previously focused desktop.
This fixes the problem by handling any number of events that arrive at the
same time (separated by newlines).
