Closes: #1526Closes: #314
* debug log
* semi-working prototype. works on the left and the center but not on the right
* fixes formatting
* fixes tests
* - fixed tray_width_change signal
- implements suggestions
* - fixes error with tray positioning
* - tries to fix tests. Does not work
* - fixes tests
* - implemented suggestions
* reverted formatting in comake and doc
* - changed unique_ptr to const reference
* - fixed formatting errors in code
* - actually fixed formatting(ran clang-format)
* - implemented suggestions
* - Added CHANGELOG.md entry(not sure about wording)
* - removed bar_settings from tray_manager::setup
* - fixed issue from rebase
* - fixed issue with tests from rebase
* implemented suggestions
* Update CHANGELOG.md
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* add units support (POINT, PIXEL, SPACE) for polybar
- add a size_with_unit struct
- add a geometry_format_values struct
- move dpi initialisation from renderer.cpp to bar.cpp
- add a string to size_with_unit converter
- add point support (with pt)
- add pixel support (with px)
* Fix unit test compilation
* clang-format
* Better names
The old names didn't really capture the purpose of the structs and
function.
space_type -> spacing_type
space_size -> spacing_val
size_type -> extent_type
geometry -> extent_val
geometry_format_values -> percentage_with_offset
* Remove parse_size_with_unit
No longer needed. The convert<spacing_val> function in config.cpp
already does all the work for us and always setting the type to pixel
was wrong.
In addition, line-size should not be of type spacing_val but extent_val.
* Cleanup
I tried to address most of my comments on the old PR
* Fix renderer width calculation
We can't just blindly add the x difference to the width because for
example the width should increase if x < width and the increase keeps
x < width.
Similarly, we can't just add the offset to the width.
* Rename geom_format_to_pixels to percentage_with_offset_to_pixel
* Cleanup
* Apply suggested changes from Patrick on GitHub
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update src/components/bar.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update src/components/config.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update src/components/builder.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* Update src/components/builder.cpp
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
* config: Use stod for parsing percentage
* Use stof instead of strtof
* units: Fix test edge cases
* Remove unnecessary clang-format toggle
* Use percentage_with_offset for margin-{top,bottom}
* Support negative extent values
* Rename unit to units and create a cpp file
* Move percentage_with_offset_to_pixel unit test to units
* Add unit tests for units_utils
* Clarify when and how negative spacing/extent is allowed
Negative spacing is never allowed and produces a config error.
Extents allow negative values in theory, but only a few use-cases accept
it.
Only the extent value used for the `%{O}` tag and the offset value in
percentage_with_offset can be negative. Everything else is capped below
at 0.
The final pixel value of percentage_with_offset also caps below at 0.
* Fix parsing errors not being caught in config
* Print a proper error message for uncaught exceptions
* Cleanup module::get_output
All changes preserve the existing semantics
* Stop using remove_trailing_space in module::get_output
Instead, we first check if the current tag is built, and only if it is,
the spacing is prepended.
* Remove unused imports
* Restore old behavior
If there are two tags and the second one isn't built (module::build
returns false), the space in between them is removed.
For example in the mpd module:
format-online = <toggle> <label-song> foo
If mpd is not running, the mpd module will return false when trying to
build the `<label-song>` tag. If we don't remove the space between
`<toggle>` and `<label-song>`, we end up with two spaces between
`<toggle>` and `foo`.
This change is to match the old behavior where at least one trailing
space character was removed from the builder.
* Add changelog entry
* Remove unused setting
* Use percentage with offset for tray-offset
Co-authored-by: Jérôme BOULMIER <jerome.boulmier@outlook.fr>
Co-authored-by: Joe Groocock <github@frebib.net>
Deprecates not using `polybar-msg` for IPC.
Fixes#2532Closes#2465Fixes#2504
* Create FIFO specific NamedPipeHandle subclass to PipeHandle
* Prototype SocketHandle
* Move mainloop up to main.cpp
* Pass eventloop to ipc class
* Deprecate sending ipc over the named pipe
Unfortunately, we can only show the warning in the polybar log and not
give the user any feedback because the pipe is one-way
* Move eventloop into its own namespace
* Prototype ipc socket handling
* Remove handles from ipc_client
Should be independent from eventloop logic
* Remove ipc clients when finished
* Add tests for ipc_client decoding
* Add callback for complete ipc messages
* Remove template param from mixins
* Move signal handler to new callback system
* Move poll handle to new callback system
* Move FSEventHandle to new callback system
* Move TimerHandle and AsyncHandle to new callback system
* Move PipeHandle to new callback system
* Implement socket functionality in new callback system
* Correctly reset ipc named pipe handle
* Let client close handles in error callback
* Wrap client pipe and ipc::client in connection class
* Better decoder log messages
* Socket path logic
* Fix CI warnings
* Remove UVHandleGeneric
* Fix error when socket folder already exists
* Proof of concept message writeback
* Restructure ipc files
* polybar-msg: Use sockets
* polybar-msg: Better syntax for actions
* Fix memory leak with fifo
After EOF, the pipe wasn't closed and EOF was called all the time, each
time allocating a new pipe.
* Make polybar-msg compile on its own
* Rudimentary writeback for polybar-msg
* Fix payload reference going out of scope.
* Add IPC documentation
* Cleanup polybar-msg code
* Specify the v0 ipc message format
* Close ipc connection after message
* Fix ipc tests
* Properly close ipc connections
* Fix polybar-msg not working with action string
* Write polybar-msg manpage
* polybar-msg: Stop using exit()
* ipc: Print log message with PID
* Add tests for ipc util
* polybar-msg: Print PID with success message
* ipc: Propagate message errors
* Rename ipc::client to ipc::decoder
* Rename ipc.cpp to polybar-msg.cpp
* ipc: Write encoder function and fix decoder bugs
* ipc: Use message format for responses
* ipc: Handle wrong message types
* ipc: Write back error message if ipc message cannot be processed
This only happens for commands and empty actions.
Non-empty actions are not immediately executed, but deferred until the
next loop iteration.
* Remove TODO about deleting runtime directory
The socket file is not deleted after socket.close() is called, only
after libuv executes the close callback.
So we can't just call rmdir because it will probably always fail.
* CLeanup WriteRequest
* Update manpage authors
* Cleanup
The previous CAST_MOD(Impl) for the action_router constructor was
illegal because `this` is not yet of type Impl (because the subclass
constructor has not run yet).
The action_router now accepts std::function for its callbacks.
Fixes#2519
Fixes#1978
* Move tail and non-tail handler to method
Defining them in the constructor is ugly.
* script: Iterate over defined actions instead of fixed list
* Separate running logic and lock m_output
* Include POLYBAR_FLAGS in linker flags
* Stop using m_prev in script_runner
* Join module threads in stop function
Joining in the destructor may lead to UB because the subclass is already
deconstructed but the threads may still require it to be around (e.g.
for calling any functions on the instance)
* Cleanup script module
* Update changelog
* Remove AfterReturn class
* Remove m_stopping from script module
* Fix polybar not reading the entire line from child process.
For every `readline` call we created a new fd_streambuf. This means once
`readline` returns, the streambuf is destructed and and pending data in
its temporary buffer discarded and we never actually read it.
* Remove unused includes
* Remove DEBUG_SHADED
Was disabled by default AND behind an #if 0
* Make TimerHandle expose more libuv functions
* Prepare for moving double clicks into eventloop
* Make eventloop available to bar
* Remove bar mutex
Everything in the bar is now in the same thread
* Move double-click handling to eventloop
* Extract double click deferred function into method
* Stop throttling clicks
* Increase double click interval to 400 and add option
double-click-interval in the bar section
Closes#1441
* Implement dimming using timer handles
* Remove taskqueue
* Remove unused dependencies
* Cleanup & Comments
The variables storing the current colors, attribute activations and font
were only used in a single place and can easily also be read from the
context.
This allows us to remove a lot of the state of the renderer.
Each major target of polybar can now be enabled/disabled while
configuring (even polybar itself).
The cmake code specific to each target will only run if the target is
enabled.
This allows us to for example just build the documentation without
having to run all the cmake code related to compilation or having the
polybar dependencies installed (other than sphinx).
They were required before, but could technically be deactived (the
compilation would fail, but configuration was possible).
The WITH_XRANDR and WITH_XCOMPOSITE now no longer appear in the cmake
part. It still appears in the source code, but is always set to 1
Fixes#1536
Since APP_VERSION is different for every commit and almost all file
include settings.hpp, the whole project has to be rebuilt for every
commit. With this, hopefully, this can be greatly reduced and only
changed files need to be rebuilt. This will also help ccache
* Clean up CMake logic
- removed logic to find CppUnit (no longer used)
- removed "dirs" variable used to pass include directories
- removed add_library function (no longer used)
- removed make_executable function
* only used in 2 places (polybar and polybar-msg)
* it was more general than needed, logic is simpler without it
- split polybar into static library and executable
* this allows linking unit tests to the library
* rename library
* add coverage build
- Added a CMake build type "Coverage" that builds C and C++
code with the "--coverage" flag (recognized by both GCC and Clang)
- removed "-Wno-missing-field-initializers" from test flags,
since it didn't seem to be needed any more
- removed logic from tests/CMakeLists to disable "-Werror" and "-pedantic-errors"
since there didn't seem to be any warnings during the build
* fix whitespace
* update travis
* remove O2 from defalt flags
* allow tests to be built by default make target
* disable Werror for debug builds
This patch enables support for nl80211. In case the libnl-genl-3.0
library isn't found, it will fall back to Wext instead.
The library to use can also be manually set with the CMake option
WITH_LIBNL.
The Wireless-Extensions (WE or Wext) are deprecated and long replaced
by cfg80211.
Although Wext isn't used by WiFi drivers anymore, CFG80211_WEXT allows
old tools to communicate with modern drivers by providing a wrapper
API.
The only reason polybar couldn't build without xkb is because the
xkeyboard module's source file was not removed during compilation.
xkeyboard already has an entry in unsupported.hpp
This effectively makes xcb-util-xkb optional
