* refactor: Use flat module list if possible
Before if you wanted to iterate over all loaded modules you had to first
iterate over all blocks and then over their modules even if you didn't
care about alignment.
* refactor: setup modules in separate function
* controller: Print error for duplicate modules
You can't use the same name twice inside the module lists
E.g.
modules-left = a b c
modules-center = a
modules-right = b
would print an error.
We only print an error for now because we don't want to break existing
configs. But in the future this should be properly enforced.
While an update was forced whenever polybar was made visible, the
`m_lastinput` variable was still set to the same value as when the bar
became hidden because updates to it were prevented.
Fixes#1875
The %{PR} tag is introduced for this. It resets all colors as well as
the activation of the underline and overline and font.
This has become necessary because we don't track what raw tags a user
injects into the formatting string and otherwise their raw tags could
bleed through.
This doesn't touch action tags because even before raw action tags
weren't being tracked. Action tags also have the requirement that they
have to be used in pairs, so closing them prematurely could break things
(for example with click actions for the entire bar)
When adding a string to the builder directly, it would parse the string
for formatting tags, delete them and readd them with the methods in the
builder that keep track of open tags so that we can properly close them
when flushing.
This parser has a bug, it parses multiple formatting tags in a single
block as a single tag, e.g.
%{F#000000 u#FFFFFF +u}
would be parsed as an `F` tag with value `#000000 u#FFFFFF +u` which is
of course wrong.
Removing the parsing step fixes this problem in the simplest way
possible. This has two benefits:
* Building of modules is sped up because we don't have to do the parsing
step in the builder and many modules use this function to add strings
from a progressbar (which already has properly closed tags).
* We don't have parser logic in two places. Until now both `parser.cpp`
and `builder.cpp` actually parsed formatting tags. This leads to a lot
of code duplication and, as we've seen, bugs.
All of the modules that use this function to add text already make sure
that they properly close formatting tags (mostly by using the builder to
generate the strings)
NOTE: This change slightly changes polybar's behavior. Raw tags (tags
added by the user through the config) can now have their effects reach
neighboring modules because the builder doesn't track and thus doesn't
close them on each flush. This can (and will) be resolved by resetting
all tags at module borders.
Fixes#1555
There really is no reason to also close over/underline tags when we have
a right margin and a non-black over/underline color.
The git blame for these lines also doesn't give us any insights as to
why it was done this way.
Using a bit vector to track the active attributes does not really give a
significant speed increase, especially for only two attributes
Checking if a syntaxtag or an attribute exists in the map just adds
unnecessary code
Was around since the first commit but no documentation why. It was only
used in the text module and doesn't appear in any public documentation,
so this doesn't break anything.
This is the next step to merge #1237 in stages.
Currently there are barely any restrictions on how the config can be
written. This causes things like config files with DOS line endings to
not be parsed properly (#1366) because polybar splits by `\n` and when
parsing section headers, it can't deal with the `\r` at the end of the
line and thus doesn't recognize any section headers.
With this PR we introduce some rules as to what characters are allowed
in section names and keys.
Note: When talking about spaces I refer to any character for which
`isspace()` returns `true`.
The rules are as follows:
* A section name or a key name cannot contain any spaces as well as any
of there characters:`"'=;#[](){}:.$\%`
* Spaces at the beginning and end of lines are always ignored when
parsing
* Comment lines start with `;` or `#` and last for the whole line. The
whole line will be ignored by the parser. You cannot start a comment at
the end of a line.
* Section headers have the following form `[HEADER_NAME]`
* Key-value lines look like this:
`KEY_NAME{SPACES}={SPACES}VALUE_STRING` where `{SPACES}` represents any
number of spaces. `VALUE_STRING` can contain any characters. If it is
*surrounded* with double quotes (`"`), those quotes will be removed,
this can be used to add spaces to the beginning or end of the value
* Empty lines are lines with only spaces in them
* If the line has any other form, it is a syntax error
This will introduce the following breaking changes because of how
underdefined the config syntax was before:
* `key = ""` will get treated as an empty string instead of the literal
* string `""`
* Any section or key name with forbidden characters will now be syntax
errors.
* Certain strings will be forbidden as section names: `self`, `root`,
* `BAR`. Because they have a special meaning inside references and so a
* section `[root]` can never be referenced.
This replaces the current parser implementation with a new more robust
one that will later be expanded to also check for dependency cycles and
allow for values that contain references mixed with other strings.
This PR also now expands the config paths given over the command line so
that `--config=~/.config/polybar/config` resolves properly.
Closes#1032Closes#1694
* config_parser: Add skeleton with tests
First step in the config_parser develoment. Only tests functions that
are easily testable without many outside dependencies. Integration tests
will follow.
* config_parser: Implement parse_header
* config_parser: Implement get_line_type
* feat(string): Add trim functions with predicate
Not only trimming based on single character matching but based on a
freely specifiable predicate. Will be used to trim all spaces (based on
isspace)
* config_parser: Implement parse_key
* config_parser: Implement parse_line for valid lines
* config_parser: Throw exception on invalid lines
* config_parser: Remove line_no and file_index from parse_line
Cleaner to let the caller catch and fill in the line number and file
path
* string: Clear up misleading description of trim
Before, trim would remove all characters that *didn't* match the
predicate and thus the predicate isspace wouldn't work correctly. But
because we used the inverse (isnospace_pred) it all worked out, but if
the function was used with any other function, it wouldn't have given
the desired output
* config_parser: Implement parse_file
* config_parser: Switch operation to config_parser
This changes the way the config is invoked. Now main.cpp creates a
config_parser object which then returns the singleton config object from
the parse method. Subsequent calls to config::make will return the
already created config object as before
The config_parser does not yet have all the functionality of the old
parser: `inherit` directives are not yet resolved. Other than that all
the old functionality is implemented (creating sectionmap and applying
include-file)
Any sort of dependency detection (except for include-file) are still
missing
* config: Move xrm initialization to constructor
config_parser handles the detection of xrdb references and passes that
info to the config object.
This finally allows us to delete the config::parse_file function because
everything in it has been implemented (except for xrdb detection and
file error handling)
* refactor(config_parser): Cleanup
* config_parser: Set config data after initialization
Looks much cleaner this way
* config_parser: Expand include-file paths
* config_parser: Init xrm if the config uses %{xrdb references
* config_parser: Use same type of maps as in old impl
Polybar has some weird, not yet fixed, inheriting behaviour and it
changes depending on the order in which the config stores its data.
Using the same type of maps ensures that the behaviour stays the same.
* refactor(config_parser): Clearer invalid name error message
* config_parser: Don't allow reserved section names
Sections with the names 'self', 'BAR', 'root' could never be referenced
because those strings have a special meaning inside references
* config_parser: Handle inherit directives
This uses the old copy_inherited function, so this still suffers from
crashes if there are cyclic dependencies.
This also fixes the behaviour where any key that starts with 'inherit'
would be treated as an inherit directive
* config_parser: Clearer dependency cycle error message
* refactor(config_parser): Handle file errors when parsing
This removes the need to check if the file exists separately
* fix(config): expand config file path
Now paths using ~ and environment variables can be used as the config
path
* fix(config): Properly recognize xrdb references
* config_parser: Make messages more informative
* doc(config): Improve commenting
Comments now describe what the config_parser actually does instead of
what it will do.
We also now follow the rule that single line comments inside functions
should use `//` comments
* refactor: Move else on same line as curly braces
* fix(config_parser): Don't duplicate paths in `files`
* refactor(config_parser): Use else if for clarity
* fix(config): Undefined behavior in syntax_error
Before the custom what() method produced undefined behavior because the
returned string became invalid once the function returned.
* refactor(config): descriptive name for useless lines
is_valid could easily be confused as meaning syntactically invalid
without it being clarified in a comment
* refactor(config): Use separate strings instead of key_value
Takes just as much space and is much better to read
* fix(config_parser): TestCase -> TestSuite and fix macro call
Ref: #1644
* config_parser: use const string& in method args
* config_parser: Improve comments
* config_parser: Incorporate review comments
To avoid polybar from being killed by SIGUSR1 during reloading, SIGUSR1 is ignored until the signal is registered in the new polybar process.
As stated in signal(7) man page, the ignored signals are still ignored after a call to a function of the execvX family.
During an execve(2), the dispositions of handled signals are reset to the default;
the dispositions of ignored signals are left unchanged.
Fixes#428
Polybar had issues when there is no background set or set by a tool like imagemagick which doesn't add the root pixmap to the root window properties.
There's not much we can do about it, but at least polybar doesn't crash anymore.
Fixes#1582Fixes#1585
* fix(tray_manager): only enable transparency if neccessary
Previously, we always enabled transparency
* fix(background_manager): avoid needless fetching
* fix(renderer): move logging message to correct place
* fix(background_manager): handle dummy pixmap (_XSETROOT_ID) right
* fix(background_manager): more initialization + don't free on error
Freeing on error is incorrect, since we could still be called again later in
which case we still need the resources.
* fix(background_manager): add more infos to trace logs
* fix(background): correct typo (XROOTMAP -> XROOTPMAP)
* fix(background_manager): do not report "no background" as error
* style(background_manager): use braces for if
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* fix(background_manager): better error message for dummy pixmap
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
* style(background): some more style fixes
* fix(connection): initialize pixmap in all cases in root_pixmap()
* style(connection): improve readability using early return
This adds `monitor-exact = true` in the bar section
This also properly does best-match instead of first-match if multiple
matches exists. For example if there are two monitors HDMI2 and HDMI-2
and we try to match HDMI-2 with monitor-exact = false, until now HDMI2
would be matched. Now exact matches are always preferred.
Fixes#1532
This patch adds support for observing multiple slices of the desktop background.
This is used for the tray so that it doesn't have to rely on the bar's rect to
get the desktop background. In particular, it now handles the case where the
tray is not contained fully within the bar's outer rect (for example, when using tray-offset-{x,y})
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
The idea is that pseudo-transparency should behave like real transparency as
much as possible. To achieve this, we now render the bar the same way in both
cases. The only part where pseudo-transparency differs is at the very end, where
the rendered bar is captured and composited against the desktop background
image. This should ensure that both modes behave the same.
This reverts some behaviour differences introduced by the pseudo-transparency
implementation. The new implementation is much closer to the
non-pseudo-transparent case and thus keeps original behaviour.
For the new method we simply fill the bar with the background image fetched from
the root window if in pseudo-transparent mode, otherwise we do nothing. This
means that everything will work as in the fully-transparent mode.
The systray only supports pseudo transparency (real transparency would require
much larger changes) so the real transparency should only be used for the bar itself.
We now take the bar position that the window manager gives us instead of trying
to calculate it ourselves. This is more correct when multiple bars are attached
to the same edge, as the window manager may move some of them in that
case (assuming override redirect is not enabled)
We need to fetch the outer area from the root window, not just the inner area
because we paint the background below the borders as well.
This has the nice effect of supporting semi-transparency for borders as well.
Trimming the quotes in labels and the date module are not needed at all,
because surrounding quotes are removed when loading the values from the
config.
Removing the quotes in the builder also doesn't seem to serve any
purpose at all.
The check of the maxlen and ellipsis condition was also moved to the
label creation, this way get_label_text doesn't need to care about the
restrictions placed on maxlen and ellipsis
Using brace initialization here causes bar.hpp to not compile when
included on its own, forcing all clients to also include
tray_manager.hpp and so on, which defeats the purpose of forward
declaring those classes.
This also allows us to remove the tray_manager.hpp, renderer.hpp and
parser.hpp includes from the clients of bar.hpp
atoi, atof and so on have undefined behavior if anything goes wrong. We
now use strto*, but without error checking. In most places overflows and
the like *should* not happen. String to number conversions are only used
when reading data from other applications or from the config, if another
application gives unparsable strings or too large numbers, then most
likely there is something wrong with that application. If the error
comes from the user config, then the user has to live with values
provided by strto* on error (which are very reasonable)
Fixes#1201
There have now been several instances of people reporting that their
bars are not found and polybar not printing the config file name because
the error is thrown first, making it very difficult to debug
Fixes#759 by only drawing text background when its color is different from the background color of the bar itself.
Explicitly setting a module's background to `background-0` now stops working.
For nested actions, the inner action should override the outer action.
But because the list of actions was not iterated in reverse the outer
action was matched first.
Fixes#760
The changes introduced in 389bae2669 to
address #551 did not consider the left border
Now center modules are centered regardless of border (left or right)
settings or tray position
Fixes#672
This tries to mimic the old renderer's behavior as closely as possible.
In the absence of any information, DPI is assumed to be 96x96. DPI can
be configured on a per-bar basis using the configuration key "dpi".
To use the DPI configuration from Xresources (if built with support),
one can specify the following in the bar config:
dpi = ${xrdb:Xft.dpi:96}
This fixes a "bug" where polybar wouldn't reload on a configuration
file change on some configurations of vim, which don't actually issue
any IN_MODIFY events because they choose to move the file, replace it
with a new one, and then delete the file instead.
To work around this, we now also listen for IN_IGNORED which fires when
the file we are watching is destroyed. When this happens, we re-attach
the configuration file watcher to the new file and reload.
This removes the spacing tinkering when parsing format specs.
The following example uses the old behavoir:
format-test = <label-foo> <label-bar>
format-breaks = <label-foo><label-bar>/<bar-test>
`format-test` would replace all occurences of ' ' with the
a space string with defined `spacing` as its width. `format-breaks` would
not validate as the tags where split with ' ' as delimiter.
All that nonsense has been removed and each tag is extracted as is.
The `spacing` parameter can still be used to apply N extra whitespaces
between the tags, but it is now 0 by default.
Adds new parameter monitor-fallback, which allows the bar to revert to a
specified monitor. Polybar should now be compatible with dynamic
multi-monitor setups when using screenchange-reload = true (no need to
stop and restart the bar with a different environment variable).
Closes#243
When serveral layout groups are defined for the keyboard
they can be cycled when clicking on the module.
For example:
$ setxkbmap -layout us,sv,fr
Ref #84
