For some reason when passing some non-const strings to convert, the
convert(T&& arg) method was used instead of the one specialized for
strings.
This caused an error in clang because you can't pass objects with
non-trivial types to varargs functions.
The best solution I found was to just add a specialized function for
non-const strings.
Shell commands triggered from action tags used to block polybar until
they finished.
Since we are not actually interested in the output of the commands, it
makes sense to run them completely detached from polybar and have
polybar not block when executing these commands.
Now the spawned child processes no longer get killed when polybar
exits. This is fine because polybar is not responsible for these
processes since they were explicitly started by the user through click
commands.
Ref: #770
Ref: #1680
Only modules can now be action handlers.
This also slightly simplifies the controller because we don't need to
keep track of input handlers, we can just use the module list.
All modules now expose their actions as public static constants
Issues: The menu module no longer closes when an item is clicked (before
it would intercept any executed command and look if it matches one of
its exec commands)
Action strings now have the form '#MODULE#ACTION'
For example to trigger the action 'toggle' in the 'module/date' module
one would now use '%{A1:#date#toggle:}'
With this action strings can now be uniquely assigned to one module.
Fixes#1172
If an input is enqueued as a response to an input, the new input will be
swallowed because it will likely be enqueued less than 30ms after the
original event.
This is not something that is an issue right now but it is required to
finish #1907 where, in order to close the menu after a click, the menu
module gets an exec action that closes the menu and adds a command to
the event queue.
The setting also isn't too useful since it will just break polybar input
handling if inputs arrive too fast instead of (possibly) slowing down
the bar.
A warning implies something went wrong and (possibly) the user should do
something about it. However, warnings are not always used this way.
For example:
* When a fallback value for a `${..}` reference is used, this shouldn't
produce a warning (or notice) since using fallbacks is not something
bad.
* pulse telling you that it uses the default sink because no sink was
specified also does not warrant a warning (even notice may be too
high).
* Whenever polybar shuts down it produces a "Termination signal
received..." warning. Since there isn't a more proper way to shut down
polybar, it should not produce a warning. Same argument for a
`screenchange-reload`
Before it would only reload if the size changed and even that was
reliable since the method relied on the order of the monitor list.
Now if the monitor list differs in any way (pos, dimension, primary,
output, name) a reload is issued
the `node` and `node_repeat` were never called with the optional
parameter add_space. And its default value is false, so the
corresponding code was never used.
I think in general it is better to just have the user of those functions
call `builder::space` when they need to instead of adding more
complexity to the `node*` functions.
* Add label minlen and alignment.
Fix build
* Update src/drawtypes/label.cpp
Co-Authored-By: infokiller <infokiller@users.noreply.github.com>
* Use existing alignment type.
* Remove redundant max_len handling in label::get.
* Fix shadowing.
* Add label alignment tests.
* Handle minlen/maxlen and alignment in same function.
Also add a test for a test case brought up in the PR discussion.
* Format files with clang-format
* Move builder::get_label_text tests into label tests
builder::get_label_text doesn't really do anything anymore
* builder: remove get_label_text
* label: Clean up label::get()
* Fix comment style.
* Set default label alignment to left.
* Update src/drawtypes/label.cpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
* Update include/drawtypes/label.hpp
Co-Authored-By: Patrick Ziegler <p.ziegler96@gmail.com>
None of the payload fields seem to be used. They were the only place
where EVENT_SIZE was used and why it had to be a macro (no variable
length arrays).
Some people use text modules instead of the `separator` key in the bar
section to better configure the separator (colors, fonts).
Since we disallowed the same module being used multiple times in #1534,
this will now print an error message.
This should help with this a bit.
Ref #1913
Some WMs like i3 discard position information when unmapping the bar and
because of that the bar would be at the wrong position after being
remapped.
Fixes#1484
Ref: https://github.com/i3/i3/pull/3834
* refactor: Use flat module list if possible
Before if you wanted to iterate over all loaded modules you had to first
iterate over all blocks and then over their modules even if you didn't
care about alignment.
* refactor: setup modules in separate function
* controller: Print error for duplicate modules
You can't use the same name twice inside the module lists
E.g.
modules-left = a b c
modules-center = a
modules-right = b
would print an error.
We only print an error for now because we don't want to break existing
configs. But in the future this should be properly enforced.
The %{PR} tag is introduced for this. It resets all colors as well as
the activation of the underline and overline and font.
This has become necessary because we don't track what raw tags a user
injects into the formatting string and otherwise their raw tags could
bleed through.
This doesn't touch action tags because even before raw action tags
weren't being tracked. Action tags also have the requirement that they
have to be used in pairs, so closing them prematurely could break things
(for example with click actions for the entire bar)
Using a bit vector to track the active attributes does not really give a
significant speed increase, especially for only two attributes
Checking if a syntaxtag or an attribute exists in the map just adds
unnecessary code
This is the next step to merge #1237 in stages.
Currently there are barely any restrictions on how the config can be
written. This causes things like config files with DOS line endings to
not be parsed properly (#1366) because polybar splits by `\n` and when
parsing section headers, it can't deal with the `\r` at the end of the
line and thus doesn't recognize any section headers.
With this PR we introduce some rules as to what characters are allowed
in section names and keys.
Note: When talking about spaces I refer to any character for which
`isspace()` returns `true`.
The rules are as follows:
* A section name or a key name cannot contain any spaces as well as any
of there characters:`"'=;#[](){}:.$\%`
* Spaces at the beginning and end of lines are always ignored when
parsing
* Comment lines start with `;` or `#` and last for the whole line. The
whole line will be ignored by the parser. You cannot start a comment at
the end of a line.
* Section headers have the following form `[HEADER_NAME]`
* Key-value lines look like this:
`KEY_NAME{SPACES}={SPACES}VALUE_STRING` where `{SPACES}` represents any
number of spaces. `VALUE_STRING` can contain any characters. If it is
*surrounded* with double quotes (`"`), those quotes will be removed,
this can be used to add spaces to the beginning or end of the value
* Empty lines are lines with only spaces in them
* If the line has any other form, it is a syntax error
This will introduce the following breaking changes because of how
underdefined the config syntax was before:
* `key = ""` will get treated as an empty string instead of the literal
* string `""`
* Any section or key name with forbidden characters will now be syntax
errors.
* Certain strings will be forbidden as section names: `self`, `root`,
* `BAR`. Because they have a special meaning inside references and so a
* section `[root]` can never be referenced.
This replaces the current parser implementation with a new more robust
one that will later be expanded to also check for dependency cycles and
allow for values that contain references mixed with other strings.
This PR also now expands the config paths given over the command line so
that `--config=~/.config/polybar/config` resolves properly.
Closes#1032Closes#1694
* config_parser: Add skeleton with tests
First step in the config_parser develoment. Only tests functions that
are easily testable without many outside dependencies. Integration tests
will follow.
* config_parser: Implement parse_header
* config_parser: Implement get_line_type
* feat(string): Add trim functions with predicate
Not only trimming based on single character matching but based on a
freely specifiable predicate. Will be used to trim all spaces (based on
isspace)
* config_parser: Implement parse_key
* config_parser: Implement parse_line for valid lines
* config_parser: Throw exception on invalid lines
* config_parser: Remove line_no and file_index from parse_line
Cleaner to let the caller catch and fill in the line number and file
path
* string: Clear up misleading description of trim
Before, trim would remove all characters that *didn't* match the
predicate and thus the predicate isspace wouldn't work correctly. But
because we used the inverse (isnospace_pred) it all worked out, but if
the function was used with any other function, it wouldn't have given
the desired output
* config_parser: Implement parse_file
* config_parser: Switch operation to config_parser
This changes the way the config is invoked. Now main.cpp creates a
config_parser object which then returns the singleton config object from
the parse method. Subsequent calls to config::make will return the
already created config object as before
The config_parser does not yet have all the functionality of the old
parser: `inherit` directives are not yet resolved. Other than that all
the old functionality is implemented (creating sectionmap and applying
include-file)
Any sort of dependency detection (except for include-file) are still
missing
* config: Move xrm initialization to constructor
config_parser handles the detection of xrdb references and passes that
info to the config object.
This finally allows us to delete the config::parse_file function because
everything in it has been implemented (except for xrdb detection and
file error handling)
* refactor(config_parser): Cleanup
* config_parser: Set config data after initialization
Looks much cleaner this way
* config_parser: Expand include-file paths
* config_parser: Init xrm if the config uses %{xrdb references
* config_parser: Use same type of maps as in old impl
Polybar has some weird, not yet fixed, inheriting behaviour and it
changes depending on the order in which the config stores its data.
Using the same type of maps ensures that the behaviour stays the same.
* refactor(config_parser): Clearer invalid name error message
* config_parser: Don't allow reserved section names
Sections with the names 'self', 'BAR', 'root' could never be referenced
because those strings have a special meaning inside references
* config_parser: Handle inherit directives
This uses the old copy_inherited function, so this still suffers from
crashes if there are cyclic dependencies.
This also fixes the behaviour where any key that starts with 'inherit'
would be treated as an inherit directive
* config_parser: Clearer dependency cycle error message
* refactor(config_parser): Handle file errors when parsing
This removes the need to check if the file exists separately
* fix(config): expand config file path
Now paths using ~ and environment variables can be used as the config
path
* fix(config): Properly recognize xrdb references
* config_parser: Make messages more informative
* doc(config): Improve commenting
Comments now describe what the config_parser actually does instead of
what it will do.
We also now follow the rule that single line comments inside functions
should use `//` comments
* refactor: Move else on same line as curly braces
* fix(config_parser): Don't duplicate paths in `files`
* refactor(config_parser): Use else if for clarity
* fix(config): Undefined behavior in syntax_error
Before the custom what() method produced undefined behavior because the
returned string became invalid once the function returned.
* refactor(config): descriptive name for useless lines
is_valid could easily be confused as meaning syntactically invalid
without it being clarified in a comment
* refactor(config): Use separate strings instead of key_value
Takes just as much space and is much better to read
* fix(config_parser): TestCase -> TestSuite and fix macro call
Ref: #1644
* config_parser: use const string& in method args
* config_parser: Improve comments
* config_parser: Incorporate review comments
This adds `monitor-exact = true` in the bar section
This also properly does best-match instead of first-match if multiple
matches exists. For example if there are two monitors HDMI2 and HDMI-2
and we try to match HDMI-2 with monitor-exact = false, until now HDMI2
would be matched. Now exact matches are always preferred.
Fixes#1532
This patch adds support for observing multiple slices of the desktop background.
This is used for the tray so that it doesn't have to rely on the bar's rect to
get the desktop background. In particular, it now handles the case where the
tray is not contained fully within the bar's outer rect (for example, when using tray-offset-{x,y})
Co-Authored-By: bennofs <benno.fuenfstueck@gmail.com>
The systray only supports pseudo transparency (real transparency would require
much larger changes) so the real transparency should only be used for the bar itself.
We now take the bar position that the window manager gives us instead of trying
to calculate it ourselves. This is more correct when multiple bars are attached
to the same edge, as the window manager may move some of them in that
case (assuming override redirect is not enabled)
