build_cmd simplifies building a command string and helps avoid typo errors when
adding new commands since most commands follow the same format.
Rename EVENT_LCLICK and EVENT_RCLICK and to EVENT_TAG_LCLICK and
EVENT_TAG_RCLICK for clarity and to allow specifying multiple click commands in
the future without confusion.
Also remove std:: from vector since it is not needed.
If pin-tags is set, there is no format defined for tags that are not occupied.
However defining a format for unoccupied tags makes the pin-tags setting
redundant since then the label can just be set to empty to not show unoccupied
tags.
Following the above reasoning, the pin tags setting is removed, and
state_t::NONE is renamed to state_t::EMPTY. This way if a user wants to display
empty tags, they can specify the format, otherwise they can simply set the label
to an empty string.
The command strings were not updated since the event variable formats changed.
Also, the EVENT_PREFIX already contained a dash, so an extra character would be
erased when adding 1.
Don't move the cmd string into the check_send_cmd function since if the first
event doesn't match, the cmd string would have been modified when passed to
the function again to check if the second event matches.
Remove EVENT_SCROLL_{UP_DOWN} since it is not being used.
Change EVENT_PREFIX to include dash and event names to be just the name without
the prefix, for simplified parsing. Use check_send_cmd function to parse the
cmd, using the event name as the IPC command name, and the section after the
event name to be the argument. The format of a cmd would be "dwm-<event
name>-<arg>", so the cmd can easily be translated into an IPC command.
Call member functions for all dwmipc events for better organization and to avoid
cluttering the constructor. The dwmipc event functions are now just assigned to
a lambda that calls a member function.
Add update_tag_labels function for updating the tag labels based on their state
since this code is repetetive.
Add update_title_labels function since that code is also somewhat repetetive.
Move reconnect code to reconnect_dwm for better organization.
Use pointers to m_monitors array elements instead of holding onto indices, since
most of the time, a member of the Monitor element will need to be accessed.
These variables should always hold a valid address starting in the constructor,
so checks for nullptr should not be necessary. A monitor will always be active
and the bar will always be mapped onto a monitor.
Add some comments where needed.
Reorganize the constructor into a more logical format
Only subscribe to events if their labels are included in the default format.
Follow clang-tidy warnings and use trailing return types.
Move m_ipc->get_monitors to update_monitor_ref since in most cases where the
monitor references would need to be updated using geometry, m_ipc->get_monitors
would need to be called.
This fixes issue mihirlad55/polybar-dwm-module#4 where the title would not
update if the title of the currently focused window changed. The
focused_title_change_event is raised exactly when the focused window's
title changes, so this should automatically update the title using the callback
when necessary.
The module is currently working, but not fully stable. All tags specified in
config.cmake for internal/dwm are supported. This was implemented following the
i3 and bspwm modules. There is still some cleaning/refactoring to do to polish
the module up.
* refactor(color): Use enum class for color type
* Add testcases for tag parser
* Make tag parser a pull-style parser
Being able to parse single elements at a time gives us more fine-grained
error messages, we can also parse as much as possible and only stop
after an exception.
* fix(color): Parser did not check for invalid chars
* tag parser: First full implementation
* tag parser: Fix remaining failing tests
* tag parser: Replace old parser
* tag parser: Treat alignment as formatting tag
Makes the structure less complex and the alignment tags really are
formatting tags, they are structurally no different from the %{R} tag.
* tag parser: Cleanup type definitions
All type definitions for tags now live in tags/types.hpp, the parser.hpp
only contains the definitions necessary for actually calling the parser,
this shouldn't be included in many places (only places that actually do
parsing). But many places need the definitions for the tags themselves.
* Rename components/parser to tags/dispatch
* tag parser: Cleanup
* Add changelog
The change in #2270 accidentally broke how we access module types.
module<Impl>::TYPE always points to the module superclass and it thus
accesses its empty TYPE field.
This mainly broke legacy action handling.
Ref #2270
If two WM events arrive withing 25ms of one-another, the second one does
not trigger a bar update.
The module state is still correct, it is just not reflected in the bar.
This somehow caused updates being swallowed in fluxbox, but only after
PR #882 was merged, even though that 25ms restriction existed long
before that.
Fixes#2272
Since 3.5.0, we use m_interval for a modulo operation, this crashes the
bar if the interval is 0. A non-positive interval shouldn't be allowed
anyway, so we now throw an exception in that case.
Fixes#2273
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* [Temperature, Ramp] fix wrong icon for temperatures near base and warn temps
* Fix minor error
* Added WARN state for cpu module
* Implement WARN state for CPU, Memory modules, working on fs module
* Implement WARN state for fs module
* Simplify WARN state implementation for cpu and memory
* explicitly check percentage in get_by_percentage_with_borders
* Fixed silly error
* implement warn state on battery module, standardize the implementation on other modules
* minor fixes
* fix annoying error
* use more intuitive param name
* Fix percentage with borders bug
* Make requested changes
Hide the effect of warn states when unused
* Backward Compat: use no format instead of fallback label
* Reformat
* Refactor
* Reformat
* Reformat: convert tabs to spaces
* Reformat
New config option `speed-unit = B/s` will be used to suffix the upload and download speeds.
* mod::network: udspeed-unit to set network speed unit suffix
* Changed udspeed-unit to speed-unit
Only modules can now be action handlers.
This also slightly simplifies the controller because we don't need to
keep track of input handlers, we can just use the module list.
All modules now expose their actions as public static constants
Issues: The menu module no longer closes when an item is clicked (before
it would intercept any executed command and look if it matches one of
its exec commands)
This allows us to identify module by their type and it is also better to
store the module type as part of the module instead of having it
hardcoded in factory.hpp
Action strings now have the form '#MODULE#ACTION'
For example to trigger the action 'toggle' in the 'module/date' module
one would now use '%{A1:#date#toggle:}'
With this action strings can now be uniquely assigned to one module.
Fixes#1172
Any timer_module based module would sleep for the set interval and then
continue running. Depending on the start time of polybar this
sleep pattern might not be aligned, which causes such modules to always
update in a shifted manner.
Consider the date module as an example. If the update interval is set to
60 seconds and polybar was started at 13:37:37, polybar would update the
clock at 13:38:37, 13:39:37 and so on.
To make matters worse, if a module would perform lengthy checks this
interval might drift over time, causing even more inconsistent updating.
This patch extends the base module with a sleep_until method that calls
the corresponding function on the sleephandler. Additionally the
timer_module is extended to compute the remaining time until the next
interval passes and sleep accordingly.
Closes#2064
Co-developed-by: Dominik Töllner <dominik.toellner@stud.uni-hannover.de>
Co-authored-by: Malte Bargholz <malte@screenri.de>
A warning implies something went wrong and (possibly) the user should do
something about it. However, warnings are not always used this way.
For example:
* When a fallback value for a `${..}` reference is used, this shouldn't
produce a warning (or notice) since using fallbacks is not something
bad.
* pulse telling you that it uses the default sink because no sink was
specified also does not warrant a warning (even notice may be too
high).
* Whenever polybar shuts down it produces a "Termination signal
received..." warning. Since there isn't a more proper way to shut down
polybar, it should not produce a warning. Same argument for a
`screenchange-reload`
The github module only authenticate by query string, and this method is deprecated:
https://developer.github.com/changes/2019-11-05-deprecated-passwords-and-authorizations-api/#authenticating-using-query-parameters
There is no reason to remove it before the method stop working, so I've made possible to the user choose which authentication method he will use:
* The parameter token remain unchanged.
* If the parameter user is passed then the module will use the not deprecated method, passing user and token on the body of the requisition. Otherwise the module will use the deprecated method.
Co-authored-by: Lucas <araujo.lucasvale@gmail.com>
Fixes#2002
Adds `format-offline` and `label-offline`
* feat(github): offline label & fixes
* Clear label if there are no notifications and empty-notifications = false
* clang-format
Co-authored-by: Patrick Ziegler <p.ziegler96@gmail.com>
None of the payload fields seem to be used. They were the only place
where EVENT_SIZE was used and why it had to be a macro (no variable
length arrays).
Some people use text modules instead of the `separator` key in the bar
section to better configure the separator (colors, fonts).
Since we disallowed the same module being used multiple times in #1534,
this will now print an error message.
This should help with this a bit.
Ref #1913
A workspace is occupied if it is not active and there is at least one window managed by the WM (`_NET_CLIENT_LIST`) that has set `_NET_WM_DESKTOP` to that workspace.
The behavior when `_NET_WM_DESKTOP` is not set is not yet clear but this is unlikely to happen since most WMs will position windows on some desktop.
Closes#874Fixes#1444Fixes#1033
* Set Desktop OCCUPIED if a window moves there
This covers more of an edge-case. I did this first by accident, it might
vanish later on.
* Replace tracking change of WS with currently used WS
* Untrack occupied workspaces
* Track windows and their desktops in pairs
* Match type of occupied_desktops with current_desktop
Because the index needs to be matched later on, type mismatches would be non-ideal.
* Recreate the occupied desktops everytime and remove duplicates
* Readd support for moving windows to other desktops
* Use less characters to empty the vector
* Rename variable storing the desktops
* Recount windows on every occasion
This alone simplifies the management and the lookup for occupation of a
workspace
* Keep track of number of windows in every workspace
* Add debugging output that shall be removed before merging
* Remove obsolete TODO
* m_client_list should always be diff'd, since the desktop may change
Therefore we update the desktop-count tally every time the client_list
changes. It may just be a desktop-change without a change of
clients.size()...
* Add more logging-spam to understand window/desktop lifecycle
* Lock event-handler to serialize handling of events
* Fix occupied workspace counting and change to bool array
Also, performance improvements when diffing new and old client lists
* Fix crash when all clients are removed
* Conform to linter and styleguide
* Shorten conditional as it is standard enough
Since this only guards against 0-divisions, it can be shortened
without risking too much confusion down the road.
* Guard against multiple threads accessing and modifying data
Fixes#1444
Modification of internal data happens through the handle-method, while
the build-method tries to access the data structures for display. Since
some modifications clear e.g. the m_viewports, references may become
invalid between looping over them an accessing them.
The mutex should guard against this simultanuous access.
* Do not 'adopt_lock', because calls come from very different threads
To my understanding, adopt_lock has some dependency on the mutex-ownership. Since
the lock is once called from the inside (in handle) and once from the outside (in
build), there might be a problem. After brief testing, the segfaults happened fewer
times.
See #1444
* Also listen to _NET_WM_DESKTOP
In order to move a window from one desktop to another, it is sufficient
to set the desktop-property of that window. xmonad fires a lot of events
in the case of moving a window, herbstluftwm only updates the
_NET_WM_DESKTOP-atom of the window.
This change reloads the clientlist in order to correctly set the
desktop state "occupied".
* Describe need and use of mutex
It might be possible to relieve the guard in xworkspaces_module::handle,
but I am unsure about this. Since xmonad emits a lot of events on almost
every minor change, I would let the guard keep its post, avoiding
race-conditions in event-handling.
* Give temporary variables better names
* Clarify purpose of loop
About 80% of this comment are taken from
https://github.com/jaagr/polybar/pull/882#discussion_r255317363
* Remove merge-remainder
* Use a simpler method to list occupied desktops.
Co-authored-by: Jérôme Boulmier <jerome.boulmier@outlook.fr>
* Document m_clients field
The %{PR} tag is introduced for this. It resets all colors as well as
the activation of the underline and overline and font.
This has become necessary because we don't track what raw tags a user
injects into the formatting string and otherwise their raw tags could
bleed through.
This doesn't touch action tags because even before raw action tags
weren't being tracked. Action tags also have the requirement that they
have to be used in pairs, so closing them prematurely could break things
(for example with click actions for the entire bar)
Displays real percentage instead of being set to 100 if percentage > full-at
* battery: added percentage_raw token, which ignores full-at
* battery: current_percentage returns raw, added clamping function instead
* battery: clamp percentage used by build()
Made clamp_percentage() const to allow its usage inside build()
* battery: read and return percentage in one line
