3DPrinting/Marlin-Tevo-Tarantula
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Update config

Browse source
This commit is contained in:
Przemek Grondek 2021-09-13 19:10:43 +02:00
parent dc88f5cd3f
commit 79e1eccb7e
3 changed files with 13 additions and 12 deletions
Download patch file Download diff file Expand all files Collapse all files

15
Marlin/Configuration.h
View file

@ -140,6 +140,7 @@
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_MKS_GEN_L
#define FAN_PIN 7
#endif
// Name displayed in the LCD "Ready" message and Info menu
@ -567,8 +568,8 @@
#define PID_K1 0.95 // Smoothing factor within any PID loop
#if ENABLED(PIDTEMP)
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2]
@ -624,8 +625,8 @@
// #define DEFAULT_bedKd 305.4
//TEVO Tarantula Custom PID Settings - Stock Heatbed
#define DEFAULT_bedKp 984.88
#define DEFAULT_bedKi 193.91
#define DEFAULT_bedKp 984.88
#define DEFAULT_bedKi 193.91
#define DEFAULT_bedKd 1250.55
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
@ -899,7 +900,7 @@
* Override with M92
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
*/
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 100 }
/**
* Default Max Feed Rate (mm/s)
@ -948,8 +949,8 @@
*/
#define CLASSIC_JERK
#if ENABLED(CLASSIC_JERK)
#define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0
#define DEFAULT_XJERK 15.0
#define DEFAULT_YJERK 15.0
#define DEFAULT_ZJERK 0.3
//#define DEFAULT_IJERK 0.3
//#define DEFAULT_JJERK 0.3

8
Marlin/Configuration_adv.h
View file

@ -551,7 +551,7 @@
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
#define E0_AUTO_FAN_PIN 7
#define E0_AUTO_FAN_PIN 9
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
@ -945,7 +945,7 @@
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part!
@ -1308,7 +1308,7 @@
// The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
// Enable this option and set to HIGH if your SD cards are incorrectly detected.
//#define SD_DETECT_STATE HIGH
#define SD_DETECT_STATE HIGH
//#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up
//#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
@ -1822,7 +1822,7 @@
*
* Warning: Does not respect endstops!
*/
//#define BABYSTEPPING
#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
//#define BABYSTEP_WITHOUT_HOMING

2
Marlin/src/pins/ramps/pins_MKS_GEN_L.h
View file

@ -35,7 +35,7 @@
// Heaters / Fans
//
// Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7
#define MOSFET_D_PIN 9
//
// CS Pins wired to avoid conflict with the LCD