MarlinFirmware/Marlin/pins_CHEAPTRONIC.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Cheaptronic v1.0 pin assignments
 */

#ifndef __AVR_ATmega2560__
  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif

#define BOARD_NAME         "Cheaptronic v1.0"
//
// Limit Switches
//
#define X_STOP_PIN          3
#define Y_STOP_PIN          2
#define Z_STOP_PIN          5

//
// Steppers
//
#define X_STEP_PIN         14
#define X_DIR_PIN          15
#define X_ENABLE_PIN       24

#define Y_STEP_PIN         35
#define Y_DIR_PIN          36
#define Y_ENABLE_PIN       31

#define Z_STEP_PIN         40
#define Z_DIR_PIN          41
#define Z_ENABLE_PIN       37

#define E0_STEP_PIN        26
#define E0_DIR_PIN         28
#define E0_ENABLE_PIN      25

#define E1_STEP_PIN        33
#define E1_DIR_PIN         34
#define E1_ENABLE_PIN      30

//
// Temperature sensors
//
#define TEMP_0_PIN         15   // Analog Input
#define TEMP_1_PIN         14   // Analog Input
#define TEMP_BED_PIN       13   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN       19 // EXTRUDER 1
#define HEATER_1_PIN       23 // EXTRUDER 2
#define HEATER_BED_PIN     22

//
// LCD / Controller
//
// Cheaptronic v1.0 doesn't support LCD
#define LCD_PINS_RS        -1
#define LCD_PINS_ENABLE    -1

// Cheaptronic v1.0 doesn't support keypad
#define BTN_EN1            -1
#define BTN_EN2            -1
#define BTN_ENC            -1
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 06:19:46 +00:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00			`/**`
			`* Cheaptronic v1.0 pin assignments`
			`*/`

			`#ifndef __AVR_ATmega2560__`
Enclose all #error strings with apostrophes 2016-05-13 12:10:23 +00:00			`#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00			`#endif`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 2016-06-30 09:24:29 +00:00			`#define BOARD_NAME "Cheaptronic v1.0"`
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`//`
			`// Limit Switches`
			`//`
			`#define X_STOP_PIN 3`
			`#define Y_STOP_PIN 2`
			`#define Z_STOP_PIN 5`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`//`
			`// Steppers`
			`//`
			`#define X_STEP_PIN 14`
			`#define X_DIR_PIN 15`
			`#define X_ENABLE_PIN 24`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`#define Y_STEP_PIN 35`
			`#define Y_DIR_PIN 36`
			`#define Y_ENABLE_PIN 31`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`#define Z_STEP_PIN 40`
			`#define Z_DIR_PIN 41`
			`#define Z_ENABLE_PIN 37`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`#define E0_STEP_PIN 26`
			`#define E0_DIR_PIN 28`
			`#define E0_ENABLE_PIN 25`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`#define E1_STEP_PIN 33`
			`#define E1_DIR_PIN 34`
			`#define E1_ENABLE_PIN 30`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`//`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00			`// Temperature sensors`
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`//`
Label analog pins in a similar way Some other pins formatting also 2016-10-05 06:52:43 +00:00			`#define TEMP_0_PIN 15 // Analog Input`
			`#define TEMP_1_PIN 14 // Analog Input`
			`#define TEMP_BED_PIN 13 // Analog Input`
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00
			`//`
			`// Heaters / Fans`
			`//`
			`#define HEATER_0_PIN 19 // EXTRUDER 1`
			`#define HEATER_1_PIN 23 // EXTRUDER 2`
			`#define HEATER_BED_PIN 22`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 2016-10-08 20:27:04 +00:00			`//`
			`// LCD / Controller`
			`//`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00			`// Cheaptronic v1.0 doesn't support LCD`
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`#define LCD_PINS_RS -1`
			`#define LCD_PINS_ENABLE -1`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 2015-01-26 02:40:00 +00:00
			`// Cheaptronic v1.0 doesn't support keypad`
Consistent order/formatting of pins files 2016-08-22 22:05:22 +00:00			`#define BTN_EN1 -1`
			`#define BTN_EN2 -1`
			`#define BTN_ENC -1`