3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-25 04:48:31 +00:00
Code Issues Releases Wiki Activity
3e838bf6b6
MarlinFirmware/Marlin/pins.h

736 lines
20 KiB
C
Raw Normal View History

Further cleanup of comments, partial Doxygen-style Following up on #3231
2016-03-25 06:19:46 +00:00
/**
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
*/
cleanup
2015-01-26 02:50:09 +00:00
Unify AVR90USB: fastio changes
2017-06-08 23:05:14 +00:00
/**
* Include pins definitions
*
* Pins numbering schemes:
*
* - Digital I/O pin number if used by READ/WRITE macros. (e.g., X_STEP_DIR)
* The FastIO headers map digital pins to their ports and functions.
*
* - Analog Input number if used by analogRead or DAC. (e.g., TEMP_n_PIN)
* These numbers are the same in any pin mapping.
*/
Cleanup stepper current control config options
2017-06-06 09:32:31 +00:00
#ifndef __PINS_H__
#define __PINS_H__
Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF
2011-12-12 18:34:37 +00:00
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#if MB(RAMPS_13_EFB) || MB(RAMPS_14_EFB) || MB(RAMPS_PLUS_EFB)
#define IS_RAMPS_EFB
#elif MB(RAMPS_13_EEB) || MB(RAMPS_14_EEB) || MB(RAMPS_PLUS_EEB)
#define IS_RAMPS_EEB
#elif MB(RAMPS_13_EFF) || MB(RAMPS_14_EFF) || MB(RAMPS_PLUS_EFF)
#define IS_RAMPS_EFF
#elif MB(RAMPS_13_EEF) || MB(RAMPS_14_EEF) || MB(RAMPS_PLUS_EEF)
#define IS_RAMPS_EEF
#elif MB(RAMPS_13_SF) || MB(RAMPS_14_SF) || MB(RAMPS_PLUS_SF)
#define IS_RAMPS_SF
#endif
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
//
// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
//
#if MB(RAMPS_OLD)
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#include "pins_RAMPS_OLD.h"
Remove a test from pins_RAMPS_13.h - Add 3 new lines to `pins.h` to remove 2 redundant tests in `pins_RAMPS_13.h`
2015-06-15 06:17:00 +00:00
#elif MB(RAMPS_13_EFB)
Set flags for RAMPS "type" in pins.h
2016-07-30 10:07:20 +00:00
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EEB)
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EFF)
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_EEF)
#include "pins_RAMPS_13.h"
#elif MB(RAMPS_13_SF)
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#include "pins_RAMPS_13.h"
Split RAMPS 1.3 an 1.4 (PR#2741) because of hardware differences on the SERVO0_PIN
2015-10-31 01:05:09 +00:00
#elif MB(RAMPS_14_EFB)
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 10:10:30 +00:00
#include "pins_RAMPS.h"
Set flags for RAMPS "type" in pins.h
2016-07-30 10:07:20 +00:00
#elif MB(RAMPS_14_EEB)
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 10:10:30 +00:00
#include "pins_RAMPS.h"
Set flags for RAMPS "type" in pins.h
2016-07-30 10:07:20 +00:00
#elif MB(RAMPS_14_EFF)
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 10:10:30 +00:00
#include "pins_RAMPS.h"
Set flags for RAMPS "type" in pins.h
2016-07-30 10:07:20 +00:00
#elif MB(RAMPS_14_EEF)
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 10:10:30 +00:00
#include "pins_RAMPS.h"
Set flags for RAMPS "type" in pins.h
2016-07-30 10:07:20 +00:00
#elif MB(RAMPS_14_SF)
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 10:10:30 +00:00
#include "pins_RAMPS.h"
Added RAMPS v1.4 Plus board Conflicts: Marlin/boards.h
2017-12-03 19:20:01 +00:00
#elif MB(RAMPS_PLUS_EFB)
#include "pins_RAMPS_PLUS.h"
#elif MB(RAMPS_PLUS_EEB)
#include "pins_RAMPS_PLUS.h"
#elif MB(RAMPS_PLUS_EFF)
#include "pins_RAMPS_PLUS.h"
#elif MB(RAMPS_PLUS_EEF)
#include "pins_RAMPS_PLUS.h"
#elif MB(RAMPS_PLUS_SF)
#include "pins_RAMPS_PLUS.h"
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
//
// RAMPS Derivatives - ATmega1280, ATmega2560
//
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(3DRAG)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_3DRAG.h" // ATmega1280, ATmega2560
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(K8200)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_K8200.h" // ATmega1280, ATmega2560 (3DRAG)
Add a ported example configuration for the Velleman K8400 (Vertex) printer. Supports both dual and single head printers (with the correct config). Includes community sourced feed rate fix. Rename / move files. Remove redundant definitions.
2016-07-02 13:32:21 +00:00
#elif MB(K8400)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_K8400.h" // ATmega1280, ATmega2560 (3DRAG)
#elif MB(BAM_DICE)
#include "pins_RAMPS.h" // ATmega1280, ATmega2560
#elif MB(BAM_DICE_DUE)
#include "pins_BAM_DICE_DUE.h" // ATmega1280, ATmega2560
#elif MB(MKS_BASE)
#include "pins_MKS_BASE.h" // ATmega1280, ATmega2560
#elif MB(MKS_13)
#include "pins_MKS_13.h" // ATmega1280, ATmega2560
Added MKS GEN L board (#8088) [1.1.x] Add MKS GEN L board
2017-10-27 07:13:41 +00:00
#elif MB(MKS_GEN_L)
#include "pins_MKS_GEN_L.h" // ATmega1280, ATmega2560
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#elif MB(ZRIB_V20)
#include "pins_ZRIB_V20.h" // ATmega1280, ATmega2560 (MKS_13)
#elif MB(FELIX2)
#include "pins_FELIX2.h" // ATmega1280, ATmega2560
#elif MB(RIGIDBOARD)
#include "pins_RIGIDBOARD.h" // ATmega1280, ATmega2560
#elif MB(RIGIDBOARD_V2)
#include "pins_RIGIDBOARD_V2.h" // ATmega1280, ATmega2560
#elif MB(SAINSMART_2IN1)
#include "pins_SAINSMART_2IN1.h" // ATmega1280, ATmega2560
#elif MB(ULTIMAKER)
#include "pins_ULTIMAKER.h" // ATmega1280, ATmega2560
#elif MB(ULTIMAKER_OLD)
#include "pins_ULTIMAKER_OLD.h" // ATmega1280, ATmega2560
#elif MB(AZTEEG_X3)
#include "pins_AZTEEG_X3.h" // ATmega2560
#elif MB(AZTEEG_X3_PRO)
#include "pins_AZTEEG_X3_PRO.h" // ATmega2560
#elif MB(ULTIMAIN_2)
#include "pins_ULTIMAIN_2.h" // ATmega2560
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(RUMBA)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_RUMBA.h" // ATmega2560
#elif MB(BQ_ZUM_MEGA_3D)
#include "pins_BQ_ZUM_MEGA_3D.h" // ATmega2560
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) [1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
2017-10-21 05:24:22 +00:00
#elif MB(MAKEBOARD_MINI)
#include "pins_MAKEBOARD_MINI.h" // ATmega2560
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
//
// Other ATmega1280, ATmega2560
//
#elif MB(CNCONTROLS_11)
#include "pins_CNCONTROLS_11.h" // ATmega1280, ATmega2560
#elif MB(CNCONTROLS_12)
#include "pins_CNCONTROLS_12.h" // ATmega1280, ATmega2560
#elif MB(MIGHTYBOARD_REVE)
#include "pins_MIGHTYBOARD_REVE.h" // ATmega1280, ATmega2560
#elif MB(CHEAPTRONIC)
#include "pins_CHEAPTRONIC.h" // ATmega2560
#elif MB(CHEAPTRONIC_V2)
#include "pins_CHEAPTRONICv2.h" // ATmega2560
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(MEGATRONICS)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_MEGATRONICS.h" // ATmega2560
Add support for Megatronics 3 a la #1426
2015-01-27 23:54:46 +00:00
#elif MB(MEGATRONICS_2)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_MEGATRONICS_2.h" // ATmega2560
Use MB() for Megatronics 3.1
2017-12-09 05:29:57 +00:00
#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_MEGATRONICS_3.h" // ATmega2560
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(RAMBO)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_RAMBO.h" // ATmega2560
Board definition and PIN assignments for Mini RAMBo1.0a
2017-12-05 14:01:11 +00:00
#elif MB(MINIRAMBO) || MB(MINIRAMBO_10A)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_MINIRAMBO.h" // ATmega2560
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(ELEFU_3)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_ELEFU_3.h" // ATmega2560
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion….
2015-01-26 02:40:00 +00:00
#elif MB(LEAPFROG)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_LEAPFROG.h" // ATmega1280, ATmega2560
add makerlab mega controller pin configs
2015-07-22 09:35:02 +00:00
#elif MB(MEGACONTROLLER)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_MEGACONTROLLER.h" // ATmega2560
Board A4JP should be SCOOVO_X9H
2017-03-28 03:22:13 +00:00
#elif MB(SCOOVO_X9H)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_SCOOVO_X9H.h" // ATmega2560
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-05-23 20:53:29 +00:00
#elif MB(GT2560_REV_A)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_GT2560_REV_A.h" // ATmega1280, ATmega2560
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-05-23 20:53:29 +00:00
#elif MB(GT2560_REV_A_PLUS)
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#include "pins_GT2560_REV_A_PLUS.h" // ATmega1280, ATmega2560
//
// ATmega1281, ATmega2561
//
#elif MB(MINITRONICS)
#include "pins_MINITRONICS.h" // ATmega1281
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#elif MB(SILVER_GATE)
#include "pins_SILVER_GATE.h" // ATmega2561
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
//
// Sanguinololu and Derivatives - ATmega644P, ATmega1284P
//
#elif MB(SANGUINOLOLU_11)
#include "pins_SANGUINOLOLU_11.h" // ATmega644P, ATmega1284P
#elif MB(SANGUINOLOLU_12)
#include "pins_SANGUINOLOLU_12.h" // ATmega644P, ATmega1284P
#elif MB(MELZI)
#include "pins_MELZI.h" // ATmega644P, ATmega1284P
#elif MB(MELZI_MAKR3D)
#include "pins_MELZI_MAKR3D.h" // ATmega644P, ATmega1284P
#elif MB(MELZI_CREALITY)
#include "pins_MELZI_CREALITY.h" // ATmega644P, ATmega1284P
[1.1.x] Fix support for Malyan M150 (#9146) Implements changes to LCD and encoder pins from forums.reprap.org/read.php?110,716538,728278 and also sets ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
2018-01-12 07:14:07 +00:00
#elif MB(MELZI_MALYAN)
#include "pins_MELZI_MALYAN.h" // ATmega644P, ATmega1284P
Creality Ender support. Reverse engineered from the unpublished firmware from Creality, inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". Configurations were found by seeing what code was compiled into the firmware, and constants used there. They used Marlin 1.0.1, because * 1.0.0 had very different serial output in `setup()` and overall code structure. * 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. For U8Glib, a version between 1.14 and 1.17 was used, because * 1.12 didn't have the extra speed argument to u8g_InitCom. * 1.13 didn't have the soft reset instruction for UC1701 initialization. * 1.18 has a new directory structure. Quirks * The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin suggests it's indeed 16M (and the board uses 16M). Left at 16M for now. * The LED and DOGLCD_CS are on the same pin.
2018-01-07 15:19:32 +00:00
#elif MB(CREALITY_ENDER)
#include "pins_CREALITY_ENDER.h" // ATmega1284P
Organize, document pins.h include lines
2017-08-23 23:24:02 +00:00
#elif MB(STB_11)
#include "pins_STB_11.h" // ATmega644P, ATmega1284P
#elif MB(AZTEEG_X1)
#include "pins_AZTEEG_X1.h" // ATmega644P, ATmega1284P
//
// Other ATmega644P, ATmega644, ATmega1284P
//
#elif MB(GEN3_MONOLITHIC)
#include "pins_GEN3_MONOLITHIC.h" // ATmega644P
#elif MB(GEN3_PLUS)
#include "pins_GEN3_PLUS.h" // ATmega644P, ATmega1284P
#elif MB(GEN6)
#include "pins_GEN6.h" // ATmega644P, ATmega1284P
#elif MB(GEN6_DELUXE)
#include "pins_GEN6_DELUXE.h" // ATmega644P, ATmega1284P
#elif MB(GEN7_CUSTOM)
#include "pins_GEN7_CUSTOM.h" // ATmega644P, ATmega644, ATmega1284P
#elif MB(GEN7_12)
#include "pins_GEN7_12.h" // ATmega644P, ATmega644, ATmega1284P
#elif MB(GEN7_13)
#include "pins_GEN7_13.h" // ATmega644P, ATmega644, ATmega1284P
#elif MB(GEN7_14)
#include "pins_GEN7_14.h" // ATmega644P, ATmega644, ATmega1284P
#elif MB(OMCA_A)
#include "pins_OMCA_A.h" // ATmega644
#elif MB(OMCA)
#include "pins_OMCA.h" // ATmega644P, ATmega644
#elif MB(ANET_10)
#include "pins_ANET_10.h" // ATmega1284P
#elif MB(SETHI)
#include "pins_SETHI.h" // ATmega644P, ATmega644, ATmega1284P
//
// Teensyduino - AT90USB1286, AT90USB1286P
//
#elif MB(TEENSYLU)
#include "pins_TEENSYLU.h" // AT90USB1286, AT90USB1286P
#elif MB(PRINTRBOARD)
#include "pins_PRINTRBOARD.h" // AT90USB1286
#elif MB(PRINTRBOARD_REVF)
#include "pins_PRINTRBOARD_REVF.h" // AT90USB1286
#elif MB(BRAINWAVE)
#include "pins_BRAINWAVE.h" // AT90USB646
#elif MB(BRAINWAVE_PRO)
#include "pins_BRAINWAVE_PRO.h" // AT90USB1286
#elif MB(SAV_MKI)
#include "pins_SAV_MKI.h" // AT90USB1286
#elif MB(TEENSY2)
#include "pins_TEENSY2.h" // AT90USB1286
#elif MB(5DPRINT)
#include "pins_5DPRINT.h" // AT90USB1286
Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF
2011-12-12 18:34:37 +00:00
#else
Enclose all #error strings with apostrophes
2016-05-13 12:10:23 +00:00
#error "Unknown MOTHERBOARD value set in Configuration.h"
Merged multiple extruder support. Soft PWM. (Sanguinololu can also have PID temperature control) Interrupt save WRITE for addresses > 0x0FF
2011-12-12 18:34:37 +00:00
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
// Define certain undefined pins
#ifndef X_MS1_PIN
#define X_MS1_PIN -1
#endif
#ifndef X_MS2_PIN
#define X_MS2_PIN -1
#endif
#ifndef Y_MS1_PIN
#define Y_MS1_PIN -1
#endif
#ifndef Y_MS2_PIN
#define Y_MS2_PIN -1
#endif
#ifndef Z_MS1_PIN
#define Z_MS1_PIN -1
#endif
#ifndef Z_MS2_PIN
#define Z_MS2_PIN -1
#endif
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#ifndef E0_MS1_PIN
#define E0_MS1_PIN -1
#endif
#ifndef E0_MS2_PIN
#define E0_MS2_PIN -1
#endif
#ifndef E1_MS1_PIN
#define E1_MS1_PIN -1
#endif
#ifndef E1_MS2_PIN
#define E1_MS2_PIN -1
#endif
#ifndef E2_MS1_PIN
#define E2_MS1_PIN -1
#endif
#ifndef E2_MS2_PIN
#define E2_MS2_PIN -1
#endif
#ifndef E3_MS1_PIN
#define E3_MS1_PIN -1
#endif
#ifndef E3_MS2_PIN
#define E3_MS2_PIN -1
#endif
#ifndef E4_MS1_PIN
#define E4_MS1_PIN -1
#endif
#ifndef E4_MS2_PIN
#define E4_MS2_PIN -1
#endif
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-02 23:50:25 +00:00
#ifndef E0_STEP_PIN
#define E0_STEP_PIN -1
#endif
#ifndef E0_DIR_PIN
#define E0_DIR_PIN -1
#endif
#ifndef E0_ENABLE_PIN
#define E0_ENABLE_PIN -1
#endif
#ifndef E1_STEP_PIN
#define E1_STEP_PIN -1
#endif
#ifndef E1_DIR_PIN
#define E1_DIR_PIN -1
#endif
#ifndef E1_ENABLE_PIN
#define E1_ENABLE_PIN -1
#endif
#ifndef E2_STEP_PIN
#define E2_STEP_PIN -1
#endif
#ifndef E2_DIR_PIN
#define E2_DIR_PIN -1
#endif
#ifndef E2_ENABLE_PIN
#define E2_ENABLE_PIN -1
#endif
#ifndef E3_STEP_PIN
#define E3_STEP_PIN -1
#endif
#ifndef E3_DIR_PIN
#define E3_DIR_PIN -1
#endif
#ifndef E3_ENABLE_PIN
#define E3_ENABLE_PIN -1
#endif
#ifndef E4_STEP_PIN
#define E4_STEP_PIN -1
#endif
#ifndef E4_DIR_PIN
#define E4_DIR_PIN -1
#endif
#ifndef E4_ENABLE_PIN
#define E4_ENABLE_PIN -1
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
#ifndef FAN_PIN
#define FAN_PIN -1
#endif
#ifndef FAN1_PIN
#define FAN1_PIN -1
#endif
#ifndef FAN2_PIN
#define FAN2_PIN -1
#endif
Implement USE_CONTROLLER_FAN as a feature
2017-05-03 01:18:31 +00:00
#ifndef CONTROLLER_FAN_PIN
#define CONTROLLER_FAN_PIN -1
Allow override of CONTROLLERFAN_PIN with RAMPS EFF
2016-08-07 00:16:16 +00:00
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
New feature: Part-Cooling Fan Multiplexer
2017-08-15 12:48:10 +00:00
#ifndef FANMUX0_PIN
#define FANMUX0_PIN -1
#endif
#ifndef FANMUX1_PIN
#define FANMUX1_PIN -1
#endif
#ifndef FANMUX2_PIN
#define FANMUX2_PIN -1
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
#ifndef HEATER_0_PIN
#define HEATER_0_PIN -1
#endif
#ifndef HEATER_1_PIN
#define HEATER_1_PIN -1
#endif
#ifndef HEATER_2_PIN
#define HEATER_2_PIN -1
#endif
#ifndef HEATER_3_PIN
#define HEATER_3_PIN -1
#endif
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
#ifndef HEATER_4_PIN
#define HEATER_4_PIN -1
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
#ifndef HEATER_BED_PIN
#define HEATER_BED_PIN -1
#endif
#ifndef TEMP_0_PIN
#define TEMP_0_PIN -1
#endif
#ifndef TEMP_1_PIN
#define TEMP_1_PIN -1
#endif
#ifndef TEMP_2_PIN
#define TEMP_2_PIN -1
#endif
#ifndef TEMP_3_PIN
#define TEMP_3_PIN -1
#endif
Header and pins changes to support 5 extruders
2017-04-06 21:46:30 +00:00
#ifndef TEMP_4_PIN
#define TEMP_4_PIN -1
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
#ifndef TEMP_BED_PIN
#define TEMP_BED_PIN -1
#endif
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN -1
#endif
#ifndef SDPOWER
#define SDPOWER -1
#endif
#ifndef SDSS
#define SDSS -1
#endif
#ifndef LED_PIN
#define LED_PIN -1
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN -1
#endif
#ifndef KILL_PIN
#define KILL_PIN -1
#endif
#ifndef SUICIDE_PIN
#define SUICIDE_PIN -1
#endif
Move MAX_EXTRUDERS to pins.h
2016-10-22 15:07:51 +00:00
#ifndef MAX_EXTRUDERS
Header and pins changes to support 5 extruders
2017-04-06 21:46:30 +00:00
#define MAX_EXTRUDERS 5
Move MAX_EXTRUDERS to pins.h
2016-10-22 15:07:51 +00:00
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
// Marlin needs to account for pins that equal -1
Should marlinAnalogInputToDigitalPin use analogInputToDigitalPin?
2016-10-05 07:01:52 +00:00
#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p))
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
Predefine auto fan pins in some pins files
2016-10-22 23:25:59 +00:00
//
// Assign auto fan pins if needed
//
#if !defined(E0_AUTO_FAN_PIN) && defined(ORIG_E0_AUTO_FAN_PIN)
#define E0_AUTO_FAN_PIN ORIG_E0_AUTO_FAN_PIN
#endif
#if !defined(E1_AUTO_FAN_PIN) && defined(ORIG_E1_AUTO_FAN_PIN)
#define E1_AUTO_FAN_PIN ORIG_E1_AUTO_FAN_PIN
#endif
#if !defined(E2_AUTO_FAN_PIN) && defined(ORIG_E2_AUTO_FAN_PIN)
#define E2_AUTO_FAN_PIN ORIG_E2_AUTO_FAN_PIN
#endif
#if !defined(E3_AUTO_FAN_PIN) && defined(ORIG_E3_AUTO_FAN_PIN)
#define E3_AUTO_FAN_PIN ORIG_E3_AUTO_FAN_PIN
#endif
Support 5 extruder auto fans
2017-04-08 07:42:07 +00:00
#if !defined(E4_AUTO_FAN_PIN) && defined(ORIG_E4_AUTO_FAN_PIN)
#define E4_AUTO_FAN_PIN ORIG_E4_AUTO_FAN_PIN
#endif
Predefine auto fan pins in some pins files
2016-10-22 23:25:59 +00:00
Add support for 4th extruder #1405 includes some changes to pins.h for a 4th extruder. This commit applies those changes. It also deals with a possible problem with SENSITIVE_PINS.
2015-01-26 03:43:43 +00:00
// List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN,
Make sure _Ex_PINS is defined Also fix analogInputToDigitalPin so it uses proper C hex notation
2015-01-27 23:19:03 +00:00
#define _E1_PINS
#define _E2_PINS
#define _E3_PINS
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
#define _E4_PINS
Make sure _Ex_PINS is defined Also fix analogInputToDigitalPin so it uses proper C hex notation
2015-01-27 23:19:03 +00:00
Support for two switching extruders
2017-06-19 21:54:37 +00:00
#if ENABLED(SWITCHING_EXTRUDER)
// Tools 0 and 1 use E0
#if EXTRUDERS > 2 // Tools 2 and 3 use E1
#undef _E1_PINS
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
#if EXTRUDERS > 4 // Tools 4 and 5 use E2
#undef _E2_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN,
Support for two switching extruders
2017-06-19 21:54:37 +00:00
#endif
#endif
#elif EXTRUDERS > 1
Fix compiler warnings - Patched up for most included configurations
2015-03-28 03:29:05 +00:00
#undef _E1_PINS
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
tweak
2015-01-26 13:17:08 +00:00
#if EXTRUDERS > 2
Fix compiler warnings - Patched up for most included configurations
2015-03-28 03:29:05 +00:00
#undef _E2_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN,
tweak
2015-01-26 13:17:08 +00:00
#if EXTRUDERS > 3
Fix compiler warnings - Patched up for most included configurations
2015-03-28 03:29:05 +00:00
#undef _E3_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN,
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
#if EXTRUDERS > 4
#undef _E4_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN,
Header and pins changes to support 5 extruders
2017-04-06 21:46:30 +00:00
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
#endif // EXTRUDERS > 2
#endif // EXTRUDERS > 1
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
Rename auto fan pins and add auto fan flags
2016-10-22 23:25:42 +00:00
#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN),
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#define _H1_PINS
#define _H2_PINS
#define _H3_PINS
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
#define _H4_PINS
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#if HOTENDS > 1
#undef _H1_PINS
Rename auto fan pins and add auto fan flags
2016-10-22 23:25:42 +00:00
#define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN),
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#if HOTENDS > 2
#undef _H2_PINS
Rename auto fan pins and add auto fan flags
2016-10-22 23:25:42 +00:00
#define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN),
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-05-27 00:43:20 +00:00
#if HOTENDS > 3
#undef _H3_PINS
Rename auto fan pins and add auto fan flags
2016-10-22 23:25:42 +00:00
#define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN),
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
#if HOTENDS > 4
#undef _H4_PINS
#define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN),
Header and pins changes to support 5 extruders
2017-04-06 21:46:30 +00:00
#endif // HOTENDS > 4
#endif // HOTENDS > 3
#endif // HOTENDS > 2
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-06-28 22:06:56 +00:00
#elif ENABLED(MIXING_EXTRUDER)
#undef _E1_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN,
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-06-28 22:06:56 +00:00
#if MIXING_STEPPERS > 2
#undef _E2_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN,
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-06-28 22:06:56 +00:00
#if MIXING_STEPPERS > 3
#undef _E3_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN,
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
#if MIXING_STEPPERS > 4
#undef _E4_PINS
Update pins.h for parity, protect MS pins
2018-01-22 01:51:23 +00:00
#define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN,
Header and pins changes to support 5 extruders
2017-04-06 21:46:30 +00:00
#endif // MIXING_STEPPERS > 4
#endif // MIXING_STEPPERS > 3
#endif // MIXING_STEPPERS > 2
#endif // MIXING_STEPPERS > 1
Only protect the heater pins for the defined extruders. Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.
2012-02-29 14:49:02 +00:00
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN),
//
// Assign endstop pins for boards with only 3 connectors
//
For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
2012-12-16 20:08:55 +00:00
#ifdef X_STOP_PIN
#if X_HOME_DIR < 0
#define X_MIN_PIN X_STOP_PIN
#define X_MAX_PIN -1
#else
#define X_MIN_PIN -1
#define X_MAX_PIN X_STOP_PIN
#endif
#endif
#ifdef Y_STOP_PIN
#if Y_HOME_DIR < 0
#define Y_MIN_PIN Y_STOP_PIN
#define Y_MAX_PIN -1
#else
#define Y_MIN_PIN -1
#define Y_MAX_PIN Y_STOP_PIN
#endif
#endif
#ifdef Z_STOP_PIN
#if Z_HOME_DIR < 0
#define Z_MIN_PIN Z_STOP_PIN
#define Z_MAX_PIN -1
#else
#define Z_MIN_PIN -1
#define Z_MAX_PIN Z_STOP_PIN
#endif
#endif
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
//
// Disable unused endstop / probe pins
//
Clean up probe config options
2016-09-19 04:28:11 +00:00
#if DISABLED(Z_MIN_PROBE_ENDSTOP)
Make Z_PROBE a Z_MIN_PROBE (PR#65) Currently we use the probe exclusively as a device to find the build platform(bed). For the currently supported setups this means, we use it as a additional min-endstop. A triggered when not deployed probe disturbs the homing process for max-endstops. Rename ENDSTOPPULLUP_ZPROBE to ENDSTOPPULLUP_ZMIN_PROBE Rename Z_PROBE_ENDSTOP_INVERTING to Z_MIN_PROBE_ENDSTOP_INVERTING Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Rename DISABLE_Z_PROBE_ENDSTOP to DISABLE_Z_MIN_PROBE_ENDSTOP Rename Z_PROBE_REPEATABILITY_TEST to Z_MIN_PROBE_REPEATABILITY_TEST Rename Z_PROBE_ENDSTOP to Z_MIN_PROBE_ENDSTOP Adjust comments accordingly Remove Z_MAX check for the probe in update_endstops(). Using an delta related idea of @clefranc from #61, extended to the general change for all setups. Tested with Prusa i3, max-z-endstop and permanently triggered z-probe. Worked for @clefranc's delta.
2015-08-10 08:35:39 +00:00
#undef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN -1
Enabled separate Z Probe and Z Axis endstop use at same time. Typo fixes in comments in existing code.
2015-03-28 09:31:51 +00:00
#endif
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-03-02 10:00:34 +00:00
#if DISABLED(USE_XMAX_PLUG)
New Feature: Z_DUAL_ENDSTOPS Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.
2015-03-24 17:06:44 +00:00
#undef X_MAX_PIN
#define X_MAX_PIN -1
#endif
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-03-02 10:00:34 +00:00
#if DISABLED(USE_YMAX_PLUG)
Fix lost undef Y_MAX_PIN in pins.h
2016-03-23 11:48:06 +00:00
#undef Y_MAX_PIN
New Feature: Z_DUAL_ENDSTOPS Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.
2015-03-24 17:06:44 +00:00
#define Y_MAX_PIN -1
#endif
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-03-02 10:00:34 +00:00
#if DISABLED(USE_ZMAX_PLUG)
New Feature: Z_DUAL_ENDSTOPS Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.
2015-03-24 17:06:44 +00:00
#undef Z_MAX_PIN
#define Z_MAX_PIN -1
#endif
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-03-02 10:00:34 +00:00
#if DISABLED(USE_XMIN_PLUG)
#undef X_MIN_PIN
#define X_MIN_PIN -1
#endif
#if DISABLED(USE_YMIN_PLUG)
#undef Y_MIN_PIN
#define Y_MIN_PIN -1
#endif
#if DISABLED(USE_ZMIN_PLUG)
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
#undef Z_MIN_PIN
New Feature: Z_DUAL_ENDSTOPS Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper. That way the machine is capable to align the bed during home, since both Z steppers are homed. There is also an implementation of M666 (software endstops adjustment) to this feature. After Z homing, this adjustment is applied to just one of the steppers in order to align the bed. One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2. If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive. Play a little bit with small adjustments (0.5mm) and check the behaviour. The M119 (endstops report) will start reporting the Z2 Endstop as well.
2015-03-24 17:06:44 +00:00
#define Z_MIN_PIN -1
#endif
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-07 03:47:37 +00:00
#ifndef LCD_PINS_D4
#define LCD_PINS_D4 -1
#endif
#ifndef LCD_PINS_D5
#define LCD_PINS_D5 -1
#endif
#ifndef LCD_PINS_D6
#define LCD_PINS_D6 -1
#endif
#ifndef LCD_PINS_D7
#define LCD_PINS_D7 -1
#endif
For Dual Y/Z use the next available extruder pins
2016-02-10 04:04:07 +00:00
//
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
// Dual X-carriage, Dual Y, Dual Z support
For Dual Y/Z use the next available extruder pins
2016-02-10 04:04:07 +00:00
//
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#define _X2_PINS
#define _Y2_PINS
#define _Z2_PINS
For Dual Y/Z use the next available extruder pins
2016-02-10 04:04:07 +00:00
#define __EPIN(p,q) E##p##_##q##_PIN
#define _EPIN(p,q) __EPIN(p,q)
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 17:19:07 +00:00
// The X2 axis, if any, should be the next open extruder port
#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS)
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#ifndef X2_STEP_PIN
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-06-28 22:06:56 +00:00
#define X2_STEP_PIN _EPIN(E_STEPPERS, STEP)
#define X2_DIR_PIN _EPIN(E_STEPPERS, DIR)
#define X2_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE)
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-02 23:50:25 +00:00
#if E_STEPPERS > 4 || !PIN_EXISTS(X2_ENABLE)
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 20:08:16 +00:00
#error "No E stepper plug left for X2!"
#endif
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#endif
#undef _X2_PINS
#define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN,
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-06-28 22:06:56 +00:00
#define Y2_E_INDEX INCREMENT(E_STEPPERS)
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#else
Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER
2016-06-28 22:06:56 +00:00
#define Y2_E_INDEX E_STEPPERS
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#endif
For Dual Y/Z use the next available extruder pins
2016-02-10 04:04:07 +00:00
// The Y2 axis, if any, should be the next open extruder port
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 17:19:07 +00:00
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
#ifndef Y2_STEP_PIN
#define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP)
#define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR)
#define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE)
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-02 23:50:25 +00:00
#if Y2_E_INDEX > 4 || !PIN_EXISTS(Y2_ENABLE)
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 20:08:16 +00:00
#error "No E stepper plug left for Y2!"
#endif
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 17:19:07 +00:00
#endif
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#undef _Y2_PINS
#define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN,
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 17:19:07 +00:00
#define Z2_E_INDEX INCREMENT(Y2_E_INDEX)
#else
#define Z2_E_INDEX Y2_E_INDEX
Move Y2 and Z2 pins defines to pins.h
2015-08-28 01:08:09 +00:00
#endif
For Dual Y/Z use the next available extruder pins
2016-02-10 04:04:07 +00:00
// The Z2 axis, if any, should be the next open extruder port
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 17:19:07 +00:00
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#ifndef Z2_STEP_PIN
#define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP)
#define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR)
#define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE)
Fix automatic stepper assignment for X/Y/Z dual stepper drivers
2017-11-02 23:50:25 +00:00
#if Z2_E_INDEX > 4 || !PIN_EXISTS(Z2_ENABLE)
Throw an error if no E stepper is free for X2, Y2, Z2
2017-05-02 20:08:16 +00:00
#error "No E stepper plug left for Z2!"
#endif
X_DUAL_STEPPER_DRIVERS implementation
2016-07-11 17:19:07 +00:00
#endif
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
#undef _Z2_PINS
#define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN,
Move Y2 and Z2 pins defines to pins.h
2015-08-28 01:08:09 +00:00
#endif
Fix missing backslash in macro
2015-04-04 10:35:16 +00:00
#define SENSITIVE_PINS { 0, 1, \
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \
Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \
Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \
Implement USE_CONTROLLER_FAN as a feature
2017-05-03 01:18:31 +00:00
PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \
More support for 4th extruder or heater
2016-10-05 06:49:59 +00:00
_E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \
_H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \
Automatically set X2 stepper pins
2016-05-17 21:56:49 +00:00
_X2_PINS _Y2_PINS _Z2_PINS \
Cleanup pins files, fixup analogtodigitalpin, etc.
2016-05-08 01:41:20 +00:00
X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN \
Styling adjustments (PR#2668 & PR#2670) Keep "astyled" reformatting
2015-10-03 06:08:58 +00:00
}
Add support for 4th extruder #1405 includes some changes to pins.h for a 4th extruder. This commit applies those changes. It also deals with a possible problem with SENSITIVE_PINS.
2015-01-26 03:43:43 +00:00
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 10:40:44 +00:00
#define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
Repair SPI-pins SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.
2016-08-06 13:21:23 +00:00
/**
* Define SPI Pins: SCK, MISO, MOSI, SS
*/
#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
#define AVR_SCK_PIN 13
#define AVR_MISO_PIN 12
#define AVR_MOSI_PIN 11
#define AVR_SS_PIN 10
#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
#define AVR_SCK_PIN 7
#define AVR_MISO_PIN 6
#define AVR_MOSI_PIN 5
#define AVR_SS_PIN 4
#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
#define AVR_SCK_PIN 52
#define AVR_MISO_PIN 50
#define AVR_MOSI_PIN 51
#define AVR_SS_PIN 53
#elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
Unify AVR90USB: fastio changes
2017-06-08 23:05:14 +00:00
#define AVR_SCK_PIN 21
#define AVR_MISO_PIN 23
#define AVR_MOSI_PIN 22
#define AVR_SS_PIN 20
Repair SPI-pins SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.
2016-08-06 13:21:23 +00:00
#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
#define AVR_SCK_PIN 10
#define AVR_MISO_PIN 12
#define AVR_MOSI_PIN 11
#define AVR_SS_PIN 16
#endif
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 10:40:44 +00:00
#ifndef SCK_PIN
Repair SPI-pins SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.
2016-08-06 13:21:23 +00:00
#define SCK_PIN AVR_SCK_PIN
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 10:40:44 +00:00
#endif
#ifndef MISO_PIN
Repair SPI-pins SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.
2016-08-06 13:21:23 +00:00
#define MISO_PIN AVR_MISO_PIN
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 10:40:44 +00:00
#endif
#ifndef MOSI_PIN
Repair SPI-pins SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.
2016-08-06 13:21:23 +00:00
#define MOSI_PIN AVR_MOSI_PIN
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 10:40:44 +00:00
#endif
#ifndef SS_PIN
Repair SPI-pins SCK_PIN can't be defined as DIO[number] they mus be defined as pure number. So rebuilding the structure of fastio.h in pins.h.
2016-08-06 13:21:23 +00:00
#define SS_PIN AVR_SS_PIN
Switch SD2cadrLib to fastio Replace all fastDigitalRead/Write() with READ/WRITE() Define SCK_PIN, MISO_PIN, MOSI_PIN in pins.h if not already defined in the pins_*.h files. Remove these conditional pin definitions from the pin-files. They are now always defined. Define separate sets of SPI-pins for AT90USB with and without Teensy support in fastio.h. Likely this was the main reason for all that confusion about the AT90USB-SPI pins.
2016-07-27 10:40:44 +00:00
#endif
Cleanup stepper current control config options
2017-06-06 09:32:31 +00:00
#endif // __PINS_H__
Reference in New Issue Copy Permalink