MarlinFirmware/Marlin/language_de.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * German
 *
 * LCD Menu Messages
 * See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
 *
 */
#ifndef LANGUAGE_DE_H
#define LANGUAGE_DE_H

#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1

#define WELCOME_MSG                         MACHINE_NAME " bereit"
#define MSG_SD_INSERTED                     "SD-Karte erkannt"
#define MSG_SD_REMOVED                      "SD-Karte entfernt"
#define MSG_MAIN                            "Hauptmenü"
#define MSG_AUTOSTART                       "Autostart"
#define MSG_DISABLE_STEPPERS                "Motoren aus" // M84
#define MSG_AUTO_HOME                       "Home" // G28
#define MSG_LEVEL_BED_HOMING                "Homing XYZ"
#define MSG_LEVEL_BED_WAITING               "Klick für Start"
#define MSG_LEVEL_BED_DONE                  "Fertig"
#define MSG_LEVEL_BED_CANCEL                "Abbruch"
#define MSG_SET_HOME_OFFSETS                "Setze Homeoffsets"
#define MSG_HOME_OFFSETS_APPLIED            "Offsets aktiv"
#define MSG_SET_ORIGIN                      "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_PLA                     "Vorwärmen PLA"
#define MSG_PREHEAT_PLA_N                   "Vorwärmen PLA "
#define MSG_PREHEAT_PLA_ALL                 "Vorw. PLA Alle"
#define MSG_PREHEAT_PLA_BEDONLY             "Vorw. PLA Bett"
#define MSG_PREHEAT_PLA_SETTINGS            "Vorw. PLA Einst."
#define MSG_PREHEAT_ABS                     "Vorwärmen ABS"
#define MSG_PREHEAT_ABS_N                   "Vorwärmen ABS "
#define MSG_PREHEAT_ABS_ALL                 "Vorw. ABS Alle"
#define MSG_PREHEAT_ABS_BEDONLY             "Vorw. ABS Bett"
#define MSG_PREHEAT_ABS_SETTINGS            "Vorw. ABS Einst."
#define MSG_COOLDOWN                        "Abkühlen"
#define MSG_SWITCH_PS_ON                    "Netzteil ein"
#define MSG_SWITCH_PS_OFF                   "Netzteil aus"
#define MSG_EXTRUDE                         "Extrudieren"
#define MSG_RETRACT                         "Retract"
#define MSG_MOVE_AXIS                       "Bewegen"
#define MSG_LEVEL_BED                       "Bett nivellieren"
#define MSG_MOVE_X                          "X"
#define MSG_MOVE_Y                          "Y"
#define MSG_MOVE_Z                          "Z"
#define MSG_MOVE_E                          "E"
#define MSG_MOVE_01MM                       " 0.1 mm"
#define MSG_MOVE_1MM                        " 1.0 mm"
#define MSG_MOVE_10MM                       "10.0 mm"
#define MSG_SPEED                           "Geschw."
#define MSG_BED_Z                           "Bett Z"
#define MSG_NOZZLE                          "Düse"
#define MSG_BED                             "Bett"
#define MSG_FAN_SPEED                       "Lüfter"
#define MSG_FLOW                            "Durchfluss"
#define MSG_CONTROL                         "Einstellungen"
#define MSG_MIN                             LCD_STR_THERMOMETER " min"
#define MSG_MAX                             LCD_STR_THERMOMETER " max"
#define MSG_FACTOR                          LCD_STR_THERMOMETER " Faktor"
#define MSG_AUTOTEMP                        "AutoTemp"
#define MSG_ON                              "Ein"
#define MSG_OFF                             "Aus"
#define MSG_PID_P                           "PID P"
#define MSG_PID_I                           "PID I"
#define MSG_PID_D                           "PID D"
#define MSG_PID_C                           "PID C"
#define MSG_ACC                             "A"
#define MSG_VXY_JERK                        "V XY Jerk"
#define MSG_VZ_JERK                         "V Z  Jerk"
#define MSG_VE_JERK                         "V E  Jerk"
#define MSG_VMAX                            "V max " // space by purpose
#define MSG_X                               "X"
#define MSG_Y                               "Y"
#define MSG_Z                               "Z"
#define MSG_E                               "E"
#define MSG_VMIN                            "V min"
#define MSG_VTRAV_MIN                       "V min Leerfahrt"
#define MSG_AMAX                            "A max " // space by purpose
#define MSG_A_RETRACT                       "A Retract"
#define MSG_A_TRAVEL                        "A Leerfahrt"
#define MSG_XSTEPS                          "X Steps/mm"
#define MSG_YSTEPS                          "Y Steps/mm"
#define MSG_ZSTEPS                          "Z Steps/mm"
#define MSG_ESTEPS                          "E Steps/mm"
#define MSG_TEMPERATURE                     "Temperatur"
#define MSG_MOTION                          "Bewegung"
#define MSG_VOLUMETRIC                      "Filament"
#define MSG_VOLUMETRIC_ENABLED              "E in mm³"
#define MSG_FILAMENT_DIAM                   "D Fil."
#define MSG_CONTRAST                        "LCD Kontrast"
#define MSG_STORE_EPROM                     "EPROM speichern"
#define MSG_LOAD_EPROM                      "EPROM laden"
#define MSG_RESTORE_FAILSAFE                "Standardkonfiguration"
#define MSG_REFRESH                         "Aktualisieren"
#define MSG_WATCH                           "Info"
#define MSG_PREPARE                         "Vorbereitung"
#define MSG_TUNE                            "Justierung"
#define MSG_PAUSE_PRINT                     "SD-Druck Pause"
#define MSG_RESUME_PRINT                    "SD-Druck Fortsetzung"
#define MSG_STOP_PRINT                      "SD-Druck Abbruch"
#define MSG_CARD_MENU                       "SD-Karte"
#define MSG_NO_CARD                         "Keine SD-Karte"
#define MSG_DWELL                           "Warten..."
#define MSG_USERWAIT                        "Warte auf Nutzer"
#define MSG_RESUMING                        "Druckfortsetzung"
#define MSG_PRINT_ABORTED                   "Druck abgebrochen"
#define MSG_NO_MOVE                         "Motoren eingeschaltet"
#define MSG_KILLED                          "KILLED"
#define MSG_STOPPED                         "ANGEHALTEN"
#define MSG_CONTROL_RETRACT                 "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP            "Wechs. Retract mm"
#define MSG_CONTROL_RETRACTF                "Retract  V"
#define MSG_CONTROL_RETRACT_ZLIFT           "Z-Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER         "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Wechs. UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVERF        "UnRet  V"
#define MSG_AUTORETRACT                     "AutoRetract"
#define MSG_FILAMENTCHANGE                  "Filament wechseln"
#define MSG_INIT_SDCARD                     "SD-Karte erkennen"  // Manually initialize the SD-card via user interface
#define MSG_CNG_SDCARD                      "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
#define MSG_ZPROBE_OUT                      "Sensor ausserhalb"
#define MSG_YX_UNHOMED                      "X/Y vor Z homen!"
#define MSG_ZPROBE_ZOFFSET                  "Z Offset"
#define MSG_BABYSTEP_X                      "Babystep X"
#define MSG_BABYSTEP_Y                      "Babystep Y"
#define MSG_BABYSTEP_Z                      "Babystep Z"
#define MSG_ENDSTOP_ABORT                   "Endstop-Abbr. ein"
#define MSG_HEATING_FAILED_LCD              "HEIZEN FEHLGESCHLAGEN"
#define MSG_ERR_REDUNDANT_TEMP              "REDUND. TEMPERATURABWEICHUNG"
#define MSG_THERMAL_RUNAWAY                 LCD_STR_THERMOMETER " NICHT ERREICHT"
#define MSG_ERR_MAXTEMP                     LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
#define MSG_ERR_MINTEMP                     LCD_STR_THERMOMETER " UNTERSCHRITTEN"
#define MSG_ERR_MAXTEMP_BED                 "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN"
#define MSG_ERR_MINTEMP_BED                 "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN"
#define MSG_END_HOUR                        "Stunden"
#define MSG_END_MINUTE                      "Minuten"
#define MSG_HEATING                         "Aufheizen..."
#define MSG_HEATING_COMPLETE                "Aufgeheizt"
#define MSG_BED_HEATING                     "Bett aufheizen"
#define MSG_BED_DONE                        "Bett aufgeheizt"

#define MSG_DELTA_CALIBRATE                 "Delta kalibrieren"
#define MSG_DELTA_CALIBRATE_X               "Kalibriere X"
#define MSG_DELTA_CALIBRATE_Y               "Kalibriere Y"
#define MSG_DELTA_CALIBRATE_Z               "Kalibriere Z"
#define MSG_DELTA_CALIBRATE_CENTER          "Kalibriere Mitte"

#endif // LANGUAGE_DE_H
Further cleanup of comments, partial Doxygen-style Following up on #3231 2016-03-25 06:19:46 +00:00			`/**`
Added gplv3 header to all Marlin files 2016-03-24 18:01:20 +00:00			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`/**`
			`* German`
			`*`
			`* LCD Menu Messages`
Change link to the document documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757d7986a2744136331415fbbb17758c0, but http://www.marlinfirmware.org/ isn't working. 2016-03-22 10:58:41 +00:00			`* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00			`*`
			`*/`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#ifndef LANGUAGE_DE_H`
			`#define LANGUAGE_DE_H`

Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MAPPER_C2C3`
Change selection logic another time Automatic selection was to unflexible. Updated documentation Updated language files to new logic and documentation. Updated bdf2u8g.exe 2015-03-13 13:26:58 +00:00			`// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h`
			`//#define SIMULATE_ROMFONT`
			`#define DISPLAY_CHARSET_ISO10646_1`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define WELCOME_MSG MACHINE_NAME " bereit"`
			`#define MSG_SD_INSERTED "SD-Karte erkannt"`
			`#define MSG_SD_REMOVED "SD-Karte entfernt"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_MAIN "Hauptmenü"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_AUTOSTART "Autostart"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_DISABLE_STEPPERS "Motoren aus" // M84`
MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home' 2015-01-29 10:36:07 +00:00			`#define MSG_AUTO_HOME "Home" // G28`
Combine "XYZ" with MSG_LEVEL_BED_HOMING 2016-04-02 00:43:04 +00:00			`#define MSG_LEVEL_BED_HOMING "Homing XYZ"`
de-language additions 2016-04-08 20:51:04 +00:00			`#define MSG_LEVEL_BED_WAITING "Klick für Start"`
			`#define MSG_LEVEL_BED_DONE "Fertig"`
			`#define MSG_LEVEL_BED_CANCEL "Abbruch"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_SET_HOME_OFFSETS "Setze Homeoffsets"`
de-language additions 2016-04-08 20:51:04 +00:00			`#define MSG_HOME_OFFSETS_APPLIED "Offsets aktiv"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_SET_ORIGIN "Setze Nullpunkt" //"G92 X0 Y0 Z0" commented out in ultralcd.cpp`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_PREHEAT_PLA "Vorwärmen PLA"`
			`#define MSG_PREHEAT_PLA_N "Vorwärmen PLA "`
Remove language strings that only add a number This won’t reduce the string storage in the end, but it makes the language files smaller. Also removed remaining unused strings. 2015-01-28 05:36:58 +00:00			`#define MSG_PREHEAT_PLA_ALL "Vorw. PLA Alle"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_PREHEAT_PLA_BEDONLY "Vorw. PLA Bett"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_PREHEAT_PLA_SETTINGS "Vorw. PLA Einst."`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_PREHEAT_ABS "Vorwärmen ABS"`
			`#define MSG_PREHEAT_ABS_N "Vorwärmen ABS "`
Remove language strings that only add a number This won’t reduce the string storage in the end, but it makes the language files smaller. Also removed remaining unused strings. 2015-01-28 05:36:58 +00:00			`#define MSG_PREHEAT_ABS_ALL "Vorw. ABS Alle"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_PREHEAT_ABS_BEDONLY "Vorw. ABS Bett"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_PREHEAT_ABS_SETTINGS "Vorw. ABS Einst."`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_COOLDOWN "Abkühlen"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_SWITCH_PS_ON "Netzteil ein"`
			`#define MSG_SWITCH_PS_OFF "Netzteil aus"`
Fix Deutsch string errors, redundancies 2016-04-12 01:08:02 +00:00			`#define MSG_EXTRUDE "Extrudieren"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_RETRACT "Retract"`
MSG_MOVE_AXIS = 'Achsen bewegen' > 'Bewegen'. Is Extruder an axis? 2015-01-29 11:02:58 +00:00			`#define MSG_MOVE_AXIS "Bewegen"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_LEVEL_BED "Bett nivellieren"`
eye candy. 2015-01-29 11:07:01 +00:00			`#define MSG_MOVE_X "X"`
			`#define MSG_MOVE_Y "Y"`
			`#define MSG_MOVE_Z "Z"`
			`#define MSG_MOVE_E "E"`
			`#define MSG_MOVE_01MM " 0.1 mm"`
			`#define MSG_MOVE_1MM " 1.0 mm"`
			`#define MSG_MOVE_10MM "10.0 mm"`
MSG_SPEED = 'Geschw' > 'Geschw.' 2015-01-29 11:13:44 +00:00			`#define MSG_SPEED "Geschw."`
de-language additions 2016-04-08 20:51:04 +00:00			`#define MSG_BED_Z "Bett Z"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_NOZZLE "Düse"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_BED "Bett"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_FAN_SPEED "Lüfter"`
			`#define MSG_FLOW "Durchfluss"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_CONTROL "Einstellungen"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_MIN LCD_STR_THERMOMETER " min"`
			`#define MSG_MAX LCD_STR_THERMOMETER " max"`
Corected some errors inrtoduced by a faild global replacement. 2015-03-11 09:26:36 +00:00			`#define MSG_FACTOR LCD_STR_THERMOMETER " Faktor"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_AUTOTEMP "AutoTemp"`
			`#define MSG_ON "Ein"`
			`#define MSG_OFF "Aus"`
eye candy 2 2015-01-29 11:26:21 +00:00			`#define MSG_PID_P "PID P"`
			`#define MSG_PID_I "PID I"`
			`#define MSG_PID_D "PID D"`
			`#define MSG_PID_C "PID C"`
			`#define MSG_ACC "A"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_VXY_JERK "V XY Jerk"`
			`#define MSG_VZ_JERK "V Z Jerk"`
			`#define MSG_VE_JERK "V E Jerk"`
eye candy 2 2015-01-29 11:26:21 +00:00			`#define MSG_VMAX "V max " // space by purpose`
Uppercase XYZE on Graphical LCD 2016-04-18 20:42:11 +00:00			`#define MSG_X "X"`
			`#define MSG_Y "Y"`
			`#define MSG_Z "Z"`
			`#define MSG_E "E"`
eye candy 2 2015-01-29 11:26:21 +00:00			`#define MSG_VMIN "V min"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_VTRAV_MIN "V min Leerfahrt"`
eye candy 2 2015-01-29 11:26:21 +00:00			`#define MSG_AMAX "A max " // space by purpose`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_A_RETRACT "A Retract"`
			`#define MSG_A_TRAVEL "A Leerfahrt"`
			`#define MSG_XSTEPS "X Steps/mm"`
			`#define MSG_YSTEPS "Y Steps/mm"`
			`#define MSG_ZSTEPS "Z Steps/mm"`
			`#define MSG_ESTEPS "E Steps/mm"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_TEMPERATURE "Temperatur"`
			`#define MSG_MOTION "Bewegung"`
Add English defines for filament menu to non-English to prevent compile errors until translated 2015-01-03 22:28:05 +00:00			`#define MSG_VOLUMETRIC "Filament"`
Introduce - clean - prepae language files 2015-03-10 16:46:25 +00:00			`#define MSG_VOLUMETRIC_ENABLED "E in mm³"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_FILAMENT_DIAM "D Fil."`
language_de.h: updated translation and minor typos language_de.h: updated translation and minor typos 2015-04-27 23:03:54 +00:00			`#define MSG_CONTRAST "LCD Kontrast"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_STORE_EPROM "EPROM speichern"`
			`#define MSG_LOAD_EPROM "EPROM laden"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_RESTORE_FAILSAFE "Standardkonfiguration"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_REFRESH "Aktualisieren"`
MSG_WATCH > 'Beobachten' > 'Info' 2015-01-29 11:29:31 +00:00			`#define MSG_WATCH "Info"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_PREPARE "Vorbereitung"`
			`#define MSG_TUNE "Justierung"`
MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch' to work out that this can't be resumed. 2015-01-29 11:41:46 +00:00			`#define MSG_PAUSE_PRINT "SD-Druck Pause"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_RESUME_PRINT "SD-Druck Fortsetzung"`
MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch' to work out that this can't be resumed. 2015-01-29 11:41:46 +00:00			`#define MSG_STOP_PRINT "SD-Druck Abbruch"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_CARD_MENU "SD-Karte"`
			`#define MSG_NO_CARD "Keine SD-Karte"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_DWELL "Warten..."`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_USERWAIT "Warte auf Nutzer"`
			`#define MSG_RESUMING "Druckfortsetzung"`
Infoscreen messages end with a '.' if not to long. MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet. Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom stehen, weil sie eingeschaltet sind. 2015-01-29 12:02:21 +00:00			`#define MSG_PRINT_ABORTED "Druck abgebrochen"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_NO_MOVE "Motoren eingeschaltet"`
			`#define MSG_KILLED "KILLED"`
			`#define MSG_STOPPED "ANGEHALTEN"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_CONTROL_RETRACT "Retract mm"`
			`#define MSG_CONTROL_RETRACT_SWAP "Wechs. Retract mm"`
			`#define MSG_CONTROL_RETRACTF "Retract V"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_CONTROL_RETRACT_ZLIFT "Z-Hop mm"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Wechs. UnRet +mm"`
			`#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_AUTORETRACT "AutoRetract"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_FILAMENTCHANGE "Filament wechseln"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_INIT_SDCARD "SD-Karte erkennen" // Manually initialize the SD-card via user interface`
			`#define MSG_CNG_SDCARD "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21"`
Infoscreen messages end with a '.' if not to long. MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet. Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom stehen, weil sie eingeschaltet sind. 2015-01-29 12:02:21 +00:00			`#define MSG_ZPROBE_OUT "Sensor ausserhalb"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_YX_UNHOMED "X/Y vor Z homen!"`
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#define MSG_ZPROBE_ZOFFSET "Z Offset"`
			`#define MSG_BABYSTEP_X "Babystep X"`
			`#define MSG_BABYSTEP_Y "Babystep Y"`
			`#define MSG_BABYSTEP_Z "Babystep Z"`
Revisited German translation 2016-04-29 09:19:29 +00:00			`#define MSG_ENDSTOP_ABORT "Endstop-Abbr. ein"`
			`#define MSG_HEATING_FAILED_LCD "HEIZEN FEHLGESCHLAGEN"`
			`#define MSG_ERR_REDUNDANT_TEMP "REDUND. TEMPERATURABWEICHUNG"`
			`#define MSG_THERMAL_RUNAWAY LCD_STR_THERMOMETER " NICHT ERREICHT"`
			`#define MSG_ERR_MAXTEMP LCD_STR_THERMOMETER " ÜBERSCHRITTEN"`
			`#define MSG_ERR_MINTEMP LCD_STR_THERMOMETER " UNTERSCHRITTEN"`
			`#define MSG_ERR_MAXTEMP_BED "BETT " LCD_STR_THERMOMETER " ÜBERSCHRITTEN"`
			`#define MSG_ERR_MINTEMP_BED "BETT " LCD_STR_THERMOMETER " UNTERSCHRITTEN"`
Added new trasnslatable labels. * Added MSG_END_HOUR and MSG_END_MINUTE labels to all language files. * Available translations: EN, FR, DE, ES, IT, PT, PT-BR. 2015-03-31 14:59:43 +00:00			`#define MSG_END_HOUR "Stunden"`
			`#define MSG_END_MINUTE "Minuten"`
Shift some display only strings from language.h to lenguage_en.h and translate them to German. 2015-07-27 00:55:59 +00:00			`#define MSG_HEATING "Aufheizen..."`
			`#define MSG_HEATING_COMPLETE "Aufgeheizt"`
			`#define MSG_BED_HEATING "Bett aufheizen"`
			`#define MSG_BED_DONE "Bett aufgeheizt"`
Clean up, move unused to the bottom, add headings 2014-12-18 18:33:00 +00:00
de-language additions 2016-04-08 20:51:04 +00:00			`#define MSG_DELTA_CALIBRATE "Delta kalibrieren"`
			`#define MSG_DELTA_CALIBRATE_X "Kalibriere X"`
			`#define MSG_DELTA_CALIBRATE_Y "Kalibriere Y"`
			`#define MSG_DELTA_CALIBRATE_Z "Kalibriere Z"`
			`#define MSG_DELTA_CALIBRATE_CENTER "Kalibriere Mitte"`
Delta calibration menu based on http://minow.blogspot.com/index.html#4918805519571907051 To test/enable, uncomment the #define DELTA_CALIBRATION_MENU in Configuration.h 2014-12-29 17:13:00 +00:00
Split up languages.h, use ISO codes Breaking up languages.h makes it easier to translate. Using language codes makes it easier to select a language and sets the naming standard. 2014-12-18 17:31:19 +00:00			`#endif // LANGUAGE_DE_H`