MarlinFirmware/Marlin/src/module/thermistor/thermistors.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

#ifndef THERMISTORS_H_
#define THERMISTORS_H_

#include "../../inc/MarlinConfig.h"

#define OVERSAMPLENR 16
#define OV(N) int16_t((N) * (OVERSAMPLENR))

#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n || THERMISTORCHAMBER == n)

// Pt1000 and Pt100 handling
//
// Rt=R0*(1+a*T+b*T*T) [for T>0]
// a=3.9083E-3, b=-5.775E-7
#define PtA 3.9083E-3
#define PtB -5.775E-7
#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
#define PtLine(T,R0,Rup) { OV(PtAdVal(T,R0,Rup)), T },

#if ANY_THERMISTOR_IS(1) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "EPCOS"
  #include "thermistor_1.h"
#endif
#if ANY_THERMISTOR_IS(2) // 4338 K, R25 = 200 kOhm, Pull-up = 4.7 kOhm, "ATC Semitec 204GT-2"
  #include "thermistor_2.h"
#endif
#if ANY_THERMISTOR_IS(3) // beta25 = 4120 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Mendel-parts"
  #include "thermistor_3.h"
#endif
#if ANY_THERMISTOR_IS(4) // beta25 = 3950 K, R25 = 10 kOhm, Pull-up = 4.7 kOhm, "Generic"
  #include "thermistor_4.h"
#endif
#if ANY_THERMISTOR_IS(5) // beta25 = 4267 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "ParCan, ATC 104GT-2"
  #include "thermistor_5.h"
#endif
#if ANY_THERMISTOR_IS(6) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 8.2 kOhm, "EPCOS ?"
  #include "thermistor_6.h"
#endif
#if ANY_THERMISTOR_IS(7) // beta25 = 3974 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Honeywell 135-104LAG-J01"
  #include "thermistor_7.h"
#endif
#if ANY_THERMISTOR_IS(71) // beta25 = 3974 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Honeywell 135-104LAF-J01"
  #include "thermistor_71.h"
#endif
#if ANY_THERMISTOR_IS(8) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 10 kOhm, "Vishay E3104FHT"
  #include "thermistor_8.h"
#endif
#if ANY_THERMISTOR_IS(9) // beta25 = 3960 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "GE Sensing AL03006-58.2K-97-G1"
  #include "thermistor_9.h"
#endif
#if ANY_THERMISTOR_IS(10) // beta25 = 3960 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "RS 198-961"
  #include "thermistor_10.h"
#endif
#if ANY_THERMISTOR_IS(11) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "QU-BD silicone bed, QWG-104F-3950"
  #include "thermistor_11.h"
#endif
#if ANY_THERMISTOR_IS(13) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hisens"
  #include "thermistor_13.h"
#endif
#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration
  #include "thermistor_15.h"
#endif
#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
  #include "thermistor_20.h"
#endif
#if ANY_THERMISTOR_IS(51) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "EPCOS"
  #include "thermistor_51.h"
#endif
#if ANY_THERMISTOR_IS(52) // beta25 = 4338 K, R25 = 200 kOhm, Pull-up = 1 kOhm, "ATC Semitec 204GT-2"
  #include "thermistor_52.h"
#endif
#if ANY_THERMISTOR_IS(55) // beta25 = 4267 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "ATC Semitec 104GT-2 (Used on ParCan)"
  #include "thermistor_55.h"
#endif
#if ANY_THERMISTOR_IS(60) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Maker's Tool Works Kapton Bed"
  #include "thermistor_60.h"
#endif
#if ANY_THERMISTOR_IS(66) // beta25 = 4500 K, R25 = 2.5 MOhm, Pull-up = 4.7 kOhm, "DyzeDesign 500 <20>C Thermistor"
  #include "thermistor_66.h"
#endif
#if ANY_THERMISTOR_IS(12) // beta25 = 4700 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Personal calibration for Makibox hot bed"
  #include "thermistor_12.h"
#endif
#if ANY_THERMISTOR_IS(70) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hephestos 2, bqh2 stock thermistor"
  #include "thermistor_70.h"
#endif
#if ANY_THERMISTOR_IS(75) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "MGB18-104F39050L32 thermistor"
  #include "thermistor_75.h"
#endif
#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
  #include "thermistor_110.h"
#endif
#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
  #include "thermistor_147.h"
#endif
#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
  #include "thermistor_1010.h"
#endif
#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
  #include "thermistor_1047.h"
#endif
#if ANY_THERMISTOR_IS(998) // User-defined table 1
  #include "thermistor_998.h"
#endif
#if ANY_THERMISTOR_IS(999) // User-defined table 2
  #include "thermistor_999.h"
#endif

#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)

#ifdef THERMISTORHEATER_0
  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
  #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
#elif defined(HEATER_0_USES_THERMISTOR)
  #error "No heater 0 thermistor table specified"
#else
  #define HEATER_0_TEMPTABLE NULL
  #define HEATER_0_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_1
  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
  #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
#elif defined(HEATER_1_USES_THERMISTOR)
  #error "No heater 1 thermistor table specified"
#else
  #define HEATER_1_TEMPTABLE NULL
  #define HEATER_1_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_2
  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
  #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
#elif defined(HEATER_2_USES_THERMISTOR)
  #error "No heater 2 thermistor table specified"
#else
  #define HEATER_2_TEMPTABLE NULL
  #define HEATER_2_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_3
  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
  #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
#elif defined(HEATER_3_USES_THERMISTOR)
  #error "No heater 3 thermistor table specified"
#else
  #define HEATER_3_TEMPTABLE NULL
  #define HEATER_3_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORHEATER_4
  #define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)
  #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
#elif defined(HEATER_4_USES_THERMISTOR)
  #error "No heater 4 thermistor table specified"
#else
  #define HEATER_4_TEMPTABLE NULL
  #define HEATER_4_TEMPTABLE_LEN 0
#endif

#ifdef THERMISTORBED
  #define BEDTEMPTABLE TT_NAME(THERMISTORBED)
  #define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
#else
  #ifdef BED_USES_THERMISTOR
    #error "No bed thermistor table specified"
  #endif
#endif

#ifdef THERMISTORCHAMBER
  #define CHAMBERTEMPTABLE TT_NAME(THERMISTORCHAMBER)
  #define CHAMBERTEMPTABLE_LEN COUNT(CHAMBERTEMPTABLE)
#else
  #ifdef CHAMBER_USES_THERMISTOR
    #error "No chamber thermistor table specified"
  #endif
#endif

// Set the high and low raw values for the heaters
// For thermistors the highest temperature results in the lowest ADC value
// For thermocouples the highest temperature results in the highest ADC value
#ifndef HEATER_0_RAW_HI_TEMP
  #ifdef HEATER_0_USES_THERMISTOR
    #define HEATER_0_RAW_HI_TEMP 0
    #define HEATER_0_RAW_LO_TEMP 16383
  #else
    #define HEATER_0_RAW_HI_TEMP 16383
    #define HEATER_0_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_1_RAW_HI_TEMP
  #ifdef HEATER_1_USES_THERMISTOR
    #define HEATER_1_RAW_HI_TEMP 0
    #define HEATER_1_RAW_LO_TEMP 16383
  #else
    #define HEATER_1_RAW_HI_TEMP 16383
    #define HEATER_1_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_2_RAW_HI_TEMP
  #ifdef HEATER_2_USES_THERMISTOR
    #define HEATER_2_RAW_HI_TEMP 0
    #define HEATER_2_RAW_LO_TEMP 16383
  #else
    #define HEATER_2_RAW_HI_TEMP 16383
    #define HEATER_2_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_3_RAW_HI_TEMP
  #ifdef HEATER_3_USES_THERMISTOR
    #define HEATER_3_RAW_HI_TEMP 0
    #define HEATER_3_RAW_LO_TEMP 16383
  #else
    #define HEATER_3_RAW_HI_TEMP 16383
    #define HEATER_3_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_4_RAW_HI_TEMP
  #ifdef HEATER_4_USES_THERMISTOR
    #define HEATER_4_RAW_HI_TEMP 0
    #define HEATER_4_RAW_LO_TEMP 16383
  #else
    #define HEATER_4_RAW_HI_TEMP 16383
    #define HEATER_4_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_BED_RAW_HI_TEMP
  #ifdef BED_USES_THERMISTOR
    #define HEATER_BED_RAW_HI_TEMP 0
    #define HEATER_BED_RAW_LO_TEMP 16383
  #else
    #define HEATER_BED_RAW_HI_TEMP 16383
    #define HEATER_BED_RAW_LO_TEMP 0
  #endif
#endif
#ifndef HEATER_CHAMBER_RAW_HI_TEMP
  #ifdef CHAMBER_USES_THERMISTOR
    #define HEATER_CHAMBER_RAW_HI_TEMP 0
    #define HEATER_CHAMBER_RAW_LO_TEMP 16383
  #else
    #define HEATER_CHAMBER_RAW_HI_TEMP 16383
    #define HEATER_CHAMBER_RAW_LO_TEMP 0
  #endif
#endif

#endif // THERMISTORS_H_
-												Further cleanup of comments, partial Doxygen-style

Following up on #3231

											
										
										
											2016-03-25 06:19:46 +00:00
+								/**
-												Added gplv3 header to all Marlin files

											
										
										
											2016-03-24 18:01:20 +00:00
+								 * Marlin 3D Printer Firmware
 								 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 								 *
 								 * Based on Sprinter and grbl.
 								 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 								 *
 								 * This program is free software: you can redistribute it and/or modify
 								 * it under the terms of the GNU General Public License as published by
 								 * the Free Software Foundation, either version 3 of the License, or
 								 * (at your option) any later version.
 								 *
 								 * This program is distributed in the hope that it will be useful,
 								 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 								 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 								 * GNU General Public License for more details.
 								 *
 								 * You should have received a copy of the GNU General Public License
 								 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 								 *
 								 */
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								#ifndef THERMISTORS_H_
 								#define THERMISTORS_H_
-												first commit

											
										
										
											2011-08-12 20:28:35 +00:00
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								#include "../../inc/MarlinConfig.h"
-												and changed ultipanel to have the mm/sec and not mm/min
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1

Conflicts:
	Marlin/Marlin.pde
	Marlin/ultralcd.h

											
										
										
											2011-11-15 21:50:43 +00:00
-												Merged Marlin, Marlin non gen6 and Ultimaker changes

											
										
										
											2011-11-04 17:02:56 +00:00
+								#define OVERSAMPLENR 16
-												Add OV() macro for use in thermistor tables

											
										
										
											2017-11-15 09:14:55 +00:00
+								#define OV(N) int16_t((N) * (OVERSAMPLENR))
-												first commit

											
										
										
											2011-08-12 20:28:35 +00:00
-												Chamber temperature monitoring and auto fan control.

This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.

											
										
										
											2018-02-24 06:38:58 +00:00
+								#define ANY_THERMISTOR_IS(n) (THERMISTORHEATER_0 == n || THERMISTORHEATER_1 == n || THERMISTORHEATER_2 == n || THERMISTORHEATER_3 == n || THERMISTORHEATER_4 == n || THERMISTORBED == n || THERMISTORCHAMBER == n)
-												Simpler/extensible thermistor test in thermistortables.h

											
										
										
											2016-07-09 02:54:45 +00:00
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								// Pt1000 and Pt100 handling
 								//
 								// Rt=R0*(1+a*T+b*T*T) [for T>0]
 								// a=3.9083E-3, b=-5.775E-7
 								#define PtA 3.9083E-3
 								#define PtB -5.775E-7
 								#define PtRt(T,R0) ((R0)*(1.0+(PtA)*(T)+(PtB)*(T)*(T)))
 								#define PtAdVal(T,R0,Rup) (short)(1024/(Rup/PtRt(T,R0)+1))
-												Add OV() macro for use in thermistor tables

											
										
										
											2017-11-15 09:14:55 +00:00
+								#define PtLine(T,R0,Rup) { OV(PtAdVal(T,R0,Rup)), T },
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(1) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "EPCOS"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_1.h"
-												first commit

											
										
										
											2011-08-12 20:28:35 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(2) // 4338 K, R25 = 200 kOhm, Pull-up = 4.7 kOhm, "ATC Semitec 204GT-2"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_2.h"
-												first commit

											
										
										
											2011-08-12 20:28:35 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(3) // beta25 = 4120 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Mendel-parts"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_3.h"
-												first commit

											
										
										
											2011-08-12 20:28:35 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(4) // beta25 = 3950 K, R25 = 10 kOhm, Pull-up = 4.7 kOhm, "Generic"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_4.h"
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(5) // beta25 = 4267 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "ParCan, ATC 104GT-2"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_5.h"
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(6) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 8.2 kOhm, "EPCOS ?"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_6.h"
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(7) // beta25 = 3974 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Honeywell 135-104LAG-J01"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_7.h"
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(71) // beta25 = 3974 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Honeywell 135-104LAF-J01"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_71.h"
-												Added Honeywell thermistor 135-104LAF-J01

											
										
										
											2013-07-30 12:01:41 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(8) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 10 kOhm, "Vishay E3104FHT"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_8.h"
-												add RepRapPro Huxley thermistor tables

											
										
										
											2012-12-30 11:09:38 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(9) // beta25 = 3960 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "GE Sensing AL03006-58.2K-97-G1"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_9.h"
-												add RepRapPro Huxley thermistor tables

											
										
										
											2012-12-30 11:09:38 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(10) // beta25 = 3960 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "RS 198-961"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_10.h"
-												add RepRapPro Huxley thermistor tables

											
										
										
											2012-12-30 11:09:38 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(11) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "QU-BD silicone bed, QWG-104F-3950"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_11.h"
-												This table is made for thermistor 3950 (can be found on ebay for cheap)
it's caracteristics are :

R25℃ ;100KΩ±1%

B Value(R25/50℃)：3990K 1%
Dissipation Factor(mW/℃)：1.1~1.6 In still Air
Thermal Time Constant(S)：10~17 In Still Air
Operating temperature range：  (-50~+260°C)
Dimension：  1.8mm Dia X4.1mm
Lead Length  ：30mm

This table was found on the following blogs:
http://cae2100.wordpress.com/2014/03/08/beta3950-thermistor-table-for-marlin/

and

http://microfabricator.com/articles/view/id/531ad7e59aad9d3131000000/beta-3950-thermistor-table-for-marlin

											
										
										
											2014-04-13 15:03:20 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(13) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hisens"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_13.h"
-												Update thermistortables.h

Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
											
										
										
											2014-09-26 19:49:07 +00:00
+								#endif
-												Add thermistor 15 tuned for JGAurora A5

											
										
										
											2018-01-21 23:12:37 +00:00
+								#if ANY_THERMISTOR_IS(15) // JGAurora A5 thermistor calibration
 								  #include "thermistor_15.h"
 								#endif
-												Simpler/extensible thermistor test in thermistortables.h

											
										
										
											2016-07-09 02:54:45 +00:00
+								#if ANY_THERMISTOR_IS(20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_20.h"
-												Add 4th extruder

											
										
										
											2015-01-23 22:13:06 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(51) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "EPCOS"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_51.h"
-												Update Marlin/thermistortables.h
											
										
										
											2012-05-19 11:52:12 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(52) // beta25 = 4338 K, R25 = 200 kOhm, Pull-up = 1 kOhm, "ATC Semitec 204GT-2"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_52.h"
-												Update Marlin/thermistortables.h
											
										
										
											2012-05-20 10:35:28 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(55) // beta25 = 4267 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "ATC Semitec 104GT-2 (Used on ParCan)"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_55.h"
-												Update Marlin/thermistortables.h
											
										
										
											2012-05-20 19:18:45 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(60) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Maker's Tool Works Kapton Bed"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_60.h"
-												Adding Maker's Tool Works heated bed thermistor

											
										
										
											2013-03-19 03:53:37 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(66) // beta25 = 4500 K, R25 = 2.5 MOhm, Pull-up = 4.7 kOhm, "DyzeDesign 500 <20>C Thermistor"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_66.h"
-												Dyze High Temp Thermistor Support

											
										
										
											2016-07-09 02:28:37 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(12) // beta25 = 4700 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Personal calibration for Makibox hot bed"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_12.h"
-												Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed

											
										
										
											2014-04-24 08:49:42 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(70) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Hephestos 2, bqh2 stock thermistor"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_70.h"
-												Added configuration example for the BQ Hephestos 2 3D printer.
Added support for BQ ZUM Mega 3D board and stock Hephestos 2 thermistor.

											
										
										
											2016-02-27 19:17:07 +00:00
+								#endif
-												Update of comments in thermistor files. No functional changes. (#8986)


											
										
										
											2018-02-04 12:06:21 +00:00
+								#if ANY_THERMISTOR_IS(75) // beta25 = 4100 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "MGB18-104F39050L32 thermistor"
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_75.h"
-												Add Thermistor 75: MGB18 silicon pad

											
										
										
											2017-03-18 15:17:44 +00:00
+								#endif
-												Simpler/extensible thermistor test in thermistortables.h

											
										
										
											2016-07-09 02:54:45 +00:00
+								#if ANY_THERMISTOR_IS(110) // Pt100 with 1k0 pullup
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_110.h"
-												Pt100 and Pt1000 temperature sensors handling

											
										
										
											2014-02-14 11:15:31 +00:00
+								#endif
-												Simpler/extensible thermistor test in thermistortables.h

											
										
										
											2016-07-09 02:54:45 +00:00
+								#if ANY_THERMISTOR_IS(147) // Pt100 with 4k7 pullup
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_147.h"
-												Pt100 and Pt1000 temperature sensors handling

											
										
										
											2014-02-14 11:15:31 +00:00
+								#endif
-												Simpler/extensible thermistor test in thermistortables.h

											
										
										
											2016-07-09 02:54:45 +00:00
+								#if ANY_THERMISTOR_IS(1010) // Pt1000 with 1k0 pullup
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_1010.h"
-												Pt100 and Pt1000 temperature sensors handling

											
										
										
											2014-02-14 11:15:31 +00:00
+								#endif
-												Simpler/extensible thermistor test in thermistortables.h

											
										
										
											2016-07-09 02:54:45 +00:00
+								#if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_1047.h"
-												Pt100 and Pt1000 temperature sensors handling

											
										
										
											2014-02-14 11:15:31 +00:00
+								#endif
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								#if ANY_THERMISTOR_IS(998) // User-defined table 1
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_998.h"
-												Dummy Thermistor Table for testing purposes

Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.

											
										
										
											2015-02-22 14:02:04 +00:00
+								#endif
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								#if ANY_THERMISTOR_IS(999) // User-defined table 2
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								  #include "thermistor_999.h"
-												Extend the idea of dummy temperature sensors.

Added a second sensor and made them configurable.

											
										
										
											2015-02-24 10:02:16 +00:00
+								#endif
-												Dummy Thermistor Table for testing purposes

Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.

											
										
										
											2015-02-22 14:02:04 +00:00
-												Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4

											
										
										
											2011-12-06 04:33:33 +00:00
+								#define _TT_NAME(_N) temptable_ ## _N
 								#define TT_NAME(_N) _TT_NAME(_N)
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
-												Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4

											
										
										
											2011-12-06 04:33:33 +00:00
+								#ifdef THERMISTORHEATER_0
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								  #define HEATER_0_TEMPTABLE TT_NAME(THERMISTORHEATER_0)
 								  #define HEATER_0_TEMPTABLE_LEN COUNT(HEATER_0_TEMPTABLE)
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								#elif defined(HEATER_0_USES_THERMISTOR)
 								  #error "No heater 0 thermistor table specified"
-												Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4

											
										
										
											2011-12-06 04:33:33 +00:00
+								#else
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #define HEATER_0_TEMPTABLE NULL
 								  #define HEATER_0_TEMPTABLE_LEN 0
 								#endif
 								#ifdef THERMISTORHEATER_1
 								  #define HEATER_1_TEMPTABLE TT_NAME(THERMISTORHEATER_1)
 								  #define HEATER_1_TEMPTABLE_LEN COUNT(HEATER_1_TEMPTABLE)
 								#elif defined(HEATER_1_USES_THERMISTOR)
 								  #error "No heater 1 thermistor table specified"
 								#else
 								  #define HEATER_1_TEMPTABLE NULL
 								  #define HEATER_1_TEMPTABLE_LEN 0
-												Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

											
										
										
											2012-12-09 22:00:06 +00:00
+								#endif
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								#ifdef THERMISTORHEATER_2
 								  #define HEATER_2_TEMPTABLE TT_NAME(THERMISTORHEATER_2)
 								  #define HEATER_2_TEMPTABLE_LEN COUNT(HEATER_2_TEMPTABLE)
 								#elif defined(HEATER_2_USES_THERMISTOR)
 								  #error "No heater 2 thermistor table specified"
 								#else
 								  #define HEATER_2_TEMPTABLE NULL
 								  #define HEATER_2_TEMPTABLE_LEN 0
 								#endif
 								#ifdef THERMISTORHEATER_3
 								  #define HEATER_3_TEMPTABLE TT_NAME(THERMISTORHEATER_3)
 								  #define HEATER_3_TEMPTABLE_LEN COUNT(HEATER_3_TEMPTABLE)
 								#elif defined(HEATER_3_USES_THERMISTOR)
 								  #error "No heater 3 thermistor table specified"
 								#else
 								  #define HEATER_3_TEMPTABLE NULL
 								  #define HEATER_3_TEMPTABLE_LEN 0
 								#endif
-												Header and pins changes to support 5 extruders

											
										
										
											2017-04-06 21:46:30 +00:00
+								#ifdef THERMISTORHEATER_4
 								  #define HEATER_4_TEMPTABLE TT_NAME(THERMISTORHEATER_4)
 								  #define HEATER_4_TEMPTABLE_LEN COUNT(HEATER_4_TEMPTABLE)
 								#elif defined(HEATER_4_USES_THERMISTOR)
 								  #error "No heater 4 thermistor table specified"
 								#else
 								  #define HEATER_4_TEMPTABLE NULL
 								  #define HEATER_4_TEMPTABLE_LEN 0
 								#endif
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								#ifdef THERMISTORBED
 								  #define BEDTEMPTABLE TT_NAME(THERMISTORBED)
 								  #define BEDTEMPTABLE_LEN COUNT(BEDTEMPTABLE)
 								#else
 								  #ifdef BED_USES_THERMISTOR
 								    #error "No bed thermistor table specified"
 								  #endif
 								#endif
-												Chamber temperature monitoring and auto fan control.

This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.

											
										
										
											2018-02-24 06:38:58 +00:00
+								#ifdef THERMISTORCHAMBER
 								  #define CHAMBERTEMPTABLE TT_NAME(THERMISTORCHAMBER)
 								  #define CHAMBERTEMPTABLE_LEN COUNT(CHAMBERTEMPTABLE)
 								#else
 								  #ifdef CHAMBER_USES_THERMISTOR
 								    #error "No chamber thermistor table specified"
 								  #endif
 								#endif
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								// Set the high and low raw values for the heaters
 								// For thermistors the highest temperature results in the lowest ADC value
 								// For thermocouples the highest temperature results in the highest ADC value
-												Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

											
										
										
											2012-12-09 22:00:06 +00:00
+								#ifndef HEATER_0_RAW_HI_TEMP
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #ifdef HEATER_0_USES_THERMISTOR
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_0_RAW_HI_TEMP 0
 								    #define HEATER_0_RAW_LO_TEMP 16383
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #else
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_0_RAW_HI_TEMP 16383
 								    #define HEATER_0_RAW_LO_TEMP 0
 								  #endif
-												Temperature changes

											
										
										
											2011-11-05 18:21:36 +00:00
+								#endif
-												Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

											
										
										
											2012-12-09 22:00:06 +00:00
+								#ifndef HEATER_1_RAW_HI_TEMP
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #ifdef HEATER_1_USES_THERMISTOR
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_1_RAW_HI_TEMP 0
 								    #define HEATER_1_RAW_LO_TEMP 16383
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #else
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_1_RAW_HI_TEMP 16383
 								    #define HEATER_1_RAW_LO_TEMP 0
 								  #endif
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
+								#endif
-												Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

											
										
										
											2012-12-09 22:00:06 +00:00
+								#ifndef HEATER_2_RAW_HI_TEMP
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #ifdef HEATER_2_USES_THERMISTOR
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_2_RAW_HI_TEMP 0
 								    #define HEATER_2_RAW_LO_TEMP 16383
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #else
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_2_RAW_HI_TEMP 16383
 								    #define HEATER_2_RAW_LO_TEMP 0
 								  #endif
-												Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4

											
										
										
											2011-12-06 04:33:33 +00:00
+								#endif
-												Add 4th extruder

											
										
										
											2015-01-23 22:13:06 +00:00
+								#ifndef HEATER_3_RAW_HI_TEMP
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #ifdef HEATER_3_USES_THERMISTOR
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_3_RAW_HI_TEMP 0
 								    #define HEATER_3_RAW_LO_TEMP 16383
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #else
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_3_RAW_HI_TEMP 16383
 								    #define HEATER_3_RAW_LO_TEMP 0
 								  #endif
-												Add 4th extruder

											
										
										
											2015-01-23 22:13:06 +00:00
+								#endif
-												Additional 5 extruders support (solenoids, microstepping)

											
										
										
											2017-04-14 22:14:14 +00:00
+								#ifndef HEATER_4_RAW_HI_TEMP
 								  #ifdef HEATER_4_USES_THERMISTOR
 								    #define HEATER_4_RAW_HI_TEMP 0
 								    #define HEATER_4_RAW_LO_TEMP 16383
 								  #else
 								    #define HEATER_4_RAW_HI_TEMP 16383
 								    #define HEATER_4_RAW_LO_TEMP 0
 								  #endif
 								#endif
-												Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

											
										
										
											2012-12-09 22:00:06 +00:00
+								#ifndef HEATER_BED_RAW_HI_TEMP
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #ifdef BED_USES_THERMISTOR
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_BED_RAW_HI_TEMP 0
 								    #define HEATER_BED_RAW_LO_TEMP 16383
-												Split up thermistor tables

											
										
										
											2016-12-19 22:27:39 +00:00
+								  #else
-												Styling adjustments (PR#2668 & PR#2670)

Keep "astyled" reformatting
											
										
										
											2015-10-03 06:08:58 +00:00
+								    #define HEATER_BED_RAW_HI_TEMP 16383
 								    #define HEATER_BED_RAW_LO_TEMP 0
 								  #endif
-												Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

											
										
										
											2012-12-09 22:00:06 +00:00
+								#endif
-												Chamber temperature monitoring and auto fan control.

This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.

											
										
										
											2018-02-24 06:38:58 +00:00
+								#ifndef HEATER_CHAMBER_RAW_HI_TEMP
 								  #ifdef CHAMBER_USES_THERMISTOR
 								    #define HEATER_CHAMBER_RAW_HI_TEMP 0
 								    #define HEATER_CHAMBER_RAW_LO_TEMP 16383
 								  #else
 								    #define HEATER_CHAMBER_RAW_HI_TEMP 16383
 								    #define HEATER_CHAMBER_RAW_LO_TEMP 0
 								  #endif
 								#endif
-												Added thermistor tables

											
										
										
											2011-11-04 21:51:14 +00:00
-												Module updates

											
										
										
											2017-09-06 11:28:32 +00:00
+								#endif // THERMISTORS_H_