3DPrinting/MarlinFirmware
0
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2025-01-22 17:52:57 +00:00
Code Issues Releases Wiki Activity

🔧 Assert EDGE_STEPPING with TMC drivers (#27292)

Browse source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Keith Bennett 2024-07-21 18:53:51 -07:00 committed by GitHub
parent 7f0d7e760b
commit 6afaf0034c
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
2 changed files with 5 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/Configuration_adv.h
View file

@ -3443,7 +3443,7 @@
/**
* Step on both rising and falling edge signals (as with a square wave).
*/
//#define EDGE_STEPPING
#define EDGE_STEPPING
/**
* Enable M122 debugging command for TMC stepper drivers.

4
Marlin/src/inc/Warnings.cpp
View file

@ -694,6 +694,10 @@
#error "Z_SAFE_HOMING is recommended when homing with a probe. (Enable Z_SAFE_HOMING or define NO_Z_SAFE_HOMING_WARNING to suppress this warning.)"
#endif
#if HAS_TRINAMIC_CONFIG && NONE(EDGE_STEPPING, NO_EDGE_STEPPING_WARNING)
#error "EDGE_STEPPING is strongly recommended with Trinamic stepper drivers. (Enable EDGE_STEPPING or define NO_EDGE_STEPPING_WARNING to suppress this warning.)"
#endif
#if ENABLED(BIQU_MICROPROBE_V2) && NONE(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, NO_MICROPROBE_WARNING)
#warning "BIQU MicroProbe V2 detect signal requires a strong pull-up. Some processors have weak internal pull-up capabilities, so we recommended connecting MicroProbe SIGNAL / GND to Z-MIN / Z-STOP instead of the dedicated PROBE port. (Define NO_MICROPROBE_WARNING to suppress this warning.)"
#endif