3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity

Whitespace clean

Browse Source
This commit is contained in:
Scott Lahteine 2017-12-06 13:54:58 -06:00
parent 466f2761cb
commit a3b098b4be
2 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
Marlin/src/HAL/HAL_LPC1768/spi_pins.h
View File

@ -26,22 +26,22 @@
#include "../../inc/MarlinConfig.h"
#if MB(MKS_SBASE)
#define LPC_SOFTWARE_SPI // MKS_SBASE needs a software SPI because the
#define LPC_SOFTWARE_SPI // MKS_SBASE needs a software SPI because the
// selected pins are not on a hardware SPI controller
// A custom cable is needed. See the README file in the
// A custom cable is needed. See the README file in the
// Marlin\src\config\examples\Mks\Sbase directory
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5)
#define SS_PIN P0_28
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.5)
#define SS_PIN P0_28
#else
#define LPC_SOFTWARE_SPI // Re-ARM board needs a software SPI because using the
// standard LCD adapter results in the LCD and the
#define LPC_SOFTWARE_SPI // Re-ARM board needs a software SPI because using the
// standard LCD adapter results in the LCD and the
// SD card sharing a single SPI when the RepRap Full
// Graphic Smart Controller is selected

2
Marlin/src/pins/pins_MELZI_CREALITY.h
View File

@ -60,7 +60,7 @@
#define ST7920_DELAY_3 DELAY_2_NOP
#if ENABLED(MINIPANEL)
#undef DOGLCD_CS
#undef DOGLCD_CS
#define DOGLCD_CS LCD_PINS_RS
#endif