[1.1.x] Level bed corners Z-hop height option (#12859)

Marlin/Configuration.h

@@ -1111,6 +1111,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -1124,6 +1124,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Anet/A2plus/Configuration.h

@@ -1179,6 +1179,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1243,6 +1243,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -1117,6 +1117,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BIBO/TouchX/default/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -1092,6 +1092,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -1102,6 +1102,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -1092,6 +1092,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Cartesio/Configuration.h

@@ -1103,6 +1103,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/CR-10S/Configuration.h

@@ -1109,6 +1109,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/CR-10mini/Configuration.h

@@ -1123,6 +1123,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/CR-8/Configuration.h

@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/Ender-2/Configuration.h

@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/Ender-3/Configuration.h

@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/Ender-4/Configuration.h

@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Felix/Configuration.h

@@ -1086,6 +1086,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -1086,6 +1086,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -1110,6 +1110,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -1119,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -1120,6 +1120,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -1119,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/JGAurora/A5/Configuration.h

@@ -1115,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -1132,6 +1132,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/RepRapPro/Huxley/Configuration.h

@@ -1153,6 +1153,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1102,6 +1102,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -1117,6 +1117,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -1135,6 +1135,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -1163,6 +1163,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/X1/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/X3A/Configuration.h

@@ -1108,6 +1108,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/X5S/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/XY100/Configuration.h

@@ -1115,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -1134,6 +1134,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h

@@ -1114,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -1104,6 +1104,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h

@@ -1302,6 +1302,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1240,6 +1240,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h

@@ -1239,6 +1239,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1239,6 +1239,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h

@@ -1242,6 +1242,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1227,6 +1227,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1229,6 +1229,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1230,6 +1230,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1230,6 +1230,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -1118,6 +1118,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/hangprinter/Configuration.h

@@ -1275,6 +1275,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/makibox/Configuration.h

@@ -1107,6 +1107,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -1099,6 +1099,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/wt150/Configuration.h

@@ -1109,6 +1109,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/ultralcd.cpp

@@ -1824,12 +1824,18 @@ void lcd_quick_feedback(const bool clear_buttons) {
 
   #if ENABLED(LEVEL_BED_CORNERS)
 
+    #ifndef LEVEL_CORNERS_Z_HOP
+      #define LEVEL_CORNERS_Z_HOP 4.0
+    #endif
+
+    static_assert(LEVEL_CORNERS_Z_HOP >= 0, "LEVEL_CORNERS_Z_HOP must be >= 0. Please update your configuration.");
+
     /**
      * Level corners, starting in the front-left corner.
      */
     static int8_t bed_corner;
     void _lcd_goto_next_corner() {
-      line_to_z(4.0);
+      line_to_z(LEVEL_CORNERS_Z_HOP);
       switch (bed_corner) {
         case 0:
           current_position[X_AXIS] = X_MIN_BED + LEVEL_CORNERS_INSET;