daid
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
2012-02-11 16:02:47 +01:00
Erik van der Zalm
d47a3e5950
Changed check i mtion_conrol
...
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
2012-02-09 21:02:01 +01:00
Erik van der Zalm
f87c80889f
Fixed M109 timer overflow (reported by triffid)
2012-02-09 20:54:49 +01:00
Erik van der Zalm
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
2012-02-09 20:26:17 +01:00
Erik van der Zalm
6ef8459494
Corrected distance calculation. (thanks jv4779)
2012-02-09 19:53:06 +01:00
Erik van der Zalm
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
2012-02-09 19:38:53 +01:00
Erik van der Zalm
9173a5713b
Teensylu support.
2012-02-09 19:27:45 +01:00
Erik van der Zalm
da040fd393
Fixed ultimaker heater 1 pins. (Thanks daid)
2012-02-09 17:19:45 +01:00
Erik van der Zalm
bdb70c0509
Warning for 10k thermistor
2012-02-08 18:38:45 +01:00
Erik van der Zalm
5113513cb2
RC 1
2012-02-08 18:28:54 +01:00
Erik van der Zalm
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
2012-02-07 20:23:43 +01:00
Christian Thalhammer
4cc8e37bf1
lcd menue "move_axis" added
2012-02-07 12:58:05 +01:00
Christian Thalhammer
b5fae1104b
fixed sUICIDE_PIN disable
2012-02-07 08:50:26 +01:00
Erik van der Zalm
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
2012-02-06 20:13:44 +01:00
Erik van der Zalm
292ddd2edb
Fix Z_LATE_ENABLE
2012-02-06 17:38:16 +01:00
Christian Thalhammer
25cd8af536
added arduino ide GEN7 support Files
2012-02-06 14:11:25 +01:00
Christian Thalhammer
14702089ee
-disable TEMP Min MAX Kill while using PS_ON Pin
...
ON GEN7 there is no temperature reading when power is off.. so Marlin
would kill itself. There seems to be an update from "Traumflug" on GEN7
using standby VCC for thermistors.
2012-02-06 12:28:33 +01:00
Christian Thalhammer
b51e8bf7e5
-disabled CARDDETECT if PIN is set to -1
...
- redo disable Beeper if PIN is set to -1
2012-02-06 12:22:44 +01:00
Christian Thalhammer
3183a14755
-added Configuration for GEN7 which worked for me
2012-02-06 12:12:18 +01:00
Christian Thalhammer
5edef148fe
-disalbe beeper if BEEPER_PIN = -1
2012-02-06 12:10:32 +01:00
Christian Thalhammer
13e2ad2831
- added info for using GEN7 configuration
2012-02-06 11:58:52 +01:00
Christian Thalhammer
59cc5f889e
- added support for ATMega1284P
2012-02-06 11:55:56 +01:00
Christian Thalhammer
a11f3b2d2f
- Pins for modified GEN7 assigned
...
- Added support for ATMega1284
2012-02-06 11:49:23 +01:00
Erik van der Zalm
abb7e63906
fixed z-disable bug.
2012-02-05 21:14:55 +01:00
Erik van der Zalm
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
2012-02-05 13:05:07 +01:00
Erik van der Zalm
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
2012-02-05 12:42:15 +01:00
Michael Moon
9c918a497b
more work on Makefile - actually rebuilds if Makefile or Configuration.h are altered, also much cleaner output
2012-01-25 20:46:27 +11:00
Michael Moon
ab01658fd2
local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes
2012-01-24 17:02:45 +11:00
Michael Moon
42bedb3f60
PROGMEM elements must be const
2012-01-24 15:57:42 +11:00
Michael Moon
a991bde523
enable auto-reset before programming, disable afterwards
2012-01-24 14:25:28 +11:00
Michael Moon
3e575533c5
get M81 working
2012-01-24 14:24:41 +11:00
Michael Moon
2ae2ead97b
help residency not overflow
2012-01-24 14:24:24 +11:00
Michael Moon
71dc82e0b4
my local configuration
2012-01-24 13:19:37 +11:00
Michael Moon
5aadc2f5ca
cardreader needs to include some other files
2012-01-24 13:19:24 +11:00
Michael Moon
8d0916af13
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
2012-01-24 13:18:54 +11:00
haxar
6cc6029d7a
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print
2012-01-22 03:25:56 -08:00
Bernhard
157aa7f2fd
m115 eol fix
2012-01-15 20:51:49 +01:00
Bernhard
7aeb45303d
small mistake
2012-01-15 18:31:21 +01:00
Bernhard
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
2012-01-15 17:06:10 +01:00
Bernhard
3814bbb529
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
2011-12-26 09:28:51 +01:00
Bernhard
729cde4475
fix autostart failure if in wrong directory
2011-12-26 09:20:53 +01:00
Bernhard
396270a0de
fix duplicated definition of MOSI MISO pins in case motherboard==33
2011-12-26 09:20:21 +01:00
Bernhard
11f2dafc4e
one step closer to a functional makefile..
2011-12-22 16:43:28 +01:00
Bernhard
8463e39a4a
starting with sanguino arduino 1.0 compatibility
2011-12-22 16:11:15 +01:00
Bernhard
2bc160a978
add wiring.h, that can be used to overwrite:
...
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
2011-12-22 14:57:28 +01:00
Bernhard
57f9359a41
simplified the includes, makefile now works with arduino23
2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b
header file simplification
2011-12-22 12:38:50 +01:00
Bernhard
212515148e
added m240 photography support. default off
2011-12-22 12:11:39 +01:00
Bernhard
6735025428
cooldown
2011-12-22 12:02:33 +01:00
Bernhard
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
2011-12-22 11:45:52 +01:00
Erik van der Zalm
554cc1718d
Fiexed E_ENABLE_PIN errors
2011-12-15 11:59:07 +01:00
Erik van der Zalm
617968ab76
G92 fix
2011-12-12 20:43:47 +01:00
Erik van der Zalm
84d9cf7339
merging
2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
3320a5b37d
make autotemp compatile for use without pid
2011-12-11 22:25:52 +01:00
Bernhard
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
2011-12-11 22:18:50 +01:00
Bernhard
82c99625fa
instant stop of sd prints from the panel.
2011-12-11 22:10:06 +01:00
Bernhard
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
2011-12-11 15:42:56 +01:00
Bernhard
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
2011-12-09 17:07:44 +01:00
Bernhard
b1d84d879b
st_synchronize back to normal..
2011-12-09 16:13:58 +01:00
Bernhard Kubicek
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-09 06:37:42 -08:00
Bernhard
dde4b40fa9
disable steppers in runout prevention
2011-12-09 15:37:24 +01:00
Bernhard
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
2011-12-09 15:09:52 +01:00
Bernhard
aa4f9a6474
better values.
2011-12-09 14:09:34 +01:00
Bernhard
87fd249c43
made runout prevention independent of tempeorarily set esteps
2011-12-09 13:56:28 +01:00
Bernhard
1ec0c3b68a
extruder runout prevention.
2011-12-09 13:39:00 +01:00
Bernhard
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
2011-12-09 12:51:08 +01:00
Bernhard
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
2011-12-09 12:33:00 +01:00
Bernhard
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
2011-12-09 12:32:31 +01:00
Keegi
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-08 12:25:32 +02:00
Bernhard
754d2d69b2
z homing sound fix, for now until the actual cause is found..
2011-12-07 23:08:13 +01:00
Bernhard
986f0ba76c
moved <stdio.h> to more dominant location.
2011-12-07 20:56:47 +01:00
Bernhard
460b788d78
repaired homing position setting.
2011-12-07 20:54:34 +01:00
Denis B
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Bernhard
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2011-12-04 22:27:37 +01:00
Bernhard
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
2011-12-04 22:26:42 +01:00
Erik van der Zalm
89e832c295
Update endstops only for homing. (use less resources when not used)
2011-12-04 21:03:02 +01:00
Erik van der Zalm
b99c49ec3b
Add option to only check endstop when homing
2011-12-04 20:17:21 +01:00
Erik van der Zalm
95a0b28acb
Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1
2011-12-04 19:54:43 +01:00
Erik van der Zalm
af22e9cd38
Some advance modifications
2011-12-04 19:54:07 +01:00
Bernhard
7714b98da7
solved some compiler warnings that are now visible in arduino 1.0.
...
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Bernhard
dfd240b260
overworked autotemp, removed one layer of nesting from the ultralcd.
2011-12-04 09:48:53 +01:00
Bernhard
4f909963e4
make QUICKHOME configureable
2011-12-04 09:02:09 +01:00
Erik van der Zalm
6b86f15686
More 2nd extruder implementation. (Not usable)
...
Advance (not tested)
2011-12-02 17:45:05 +01:00
Bernhard
0bc9daa4f7
make it compile with arduino 1.0 ; function is still untested.
2011-12-01 16:38:01 +01:00
Bernhard
b0c3871750
more fixing of the sanguino math round problem
2011-11-30 09:07:56 +01:00
Bernhard
9c57453168
removed stream.h referenece from marlinserial.
2011-11-30 08:57:30 +01:00
Bernhard
59205ac5fc
preliminiary implementation for the early heating finish.
...
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
2011-11-30 08:51:46 +01:00
Bernhard
7a4be21b4f
made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h
2011-11-30 08:32:28 +01:00
Bernhard
716e89b87c
first homing move diagonal towards home switches.
2011-11-29 22:11:45 +01:00
Bernhard
d00b7e5587
repaired compiliation in windows
2011-11-28 22:45:40 +01:00
Bernhard
e4ab0e5982
more inlines
2011-11-28 22:11:17 +01:00
Bernhard
8cb29921a0
possible stepper release after sd printing
2011-11-28 22:09:17 +01:00
Bernhard
044886b4a0
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2011-11-28 21:52:16 +01:00
Bernhard
b19c8b74b9
force inline
2011-11-28 21:51:44 +01:00
Erik van der Zalm
6d95644c0d
Moved M88 into M84. (M84 E)
2011-11-28 21:49:54 +01:00
Bernhard
311627141b
Merge branch 'smallopt' into Marlin_v1
...
Conflicts:
Marlin/temperature.h
2011-11-28 21:36:01 +01:00
Erik van der Zalm
7216a12856
Disabled M88 for boards that don't have seperate enable pins.
2011-11-28 21:17:06 +01:00
Erik van der Zalm
98805c9228
Added M88 command. (Request from Action68)
2011-11-28 20:51:01 +01:00
Bernhard
85da81e673
inlineing of small functions in serial
2011-11-28 19:34:42 +01:00
