Scott Lahteine
157d28c418
Rename, arrange advanced pause purge options
2018-04-09 01:14:07 -05:00
Scott Lahteine
be0afd71df
Add ADVANCED_PAUSE_FEATURE ACCEL options to example configs
2018-04-07 23:14:40 -05:00
Scott Lahteine
08b09f7a4c
Add Chamber Temp options to example configs
2018-04-06 23:09:43 -05:00
Scott Lahteine
05fc3d7891
Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs
2018-04-04 20:53:00 -05:00
Scott Lahteine
68b9503b96
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 02:17:45 -05:00
Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10100 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:41 -05:00
Scott Lahteine
738a8495ad
Improve TMC config organization, naming
2018-03-13 21:43:43 -05:00
Scott Lahteine
a9392c6b27
Set a safe default MINIMUM_STEPPER_PULSE of 2
2018-03-09 03:59:18 -06:00
Scott Lahteine
2d0d5eccd8
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:58:31 -06:00
Scott Lahteine
dc733192be
Add AUTO_REPORT_SD_STATUS to example configs
2018-03-07 00:06:17 -06:00
Scott Lahteine
6845f17fb2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:13:03 -06:00
Scott Lahteine
03da273ea6
Fix LCD_PROGRESS bar
...
Fix #9208
2018-02-23 13:59:55 -06:00
Sebastianv650
9c65890644
[1.1.x] LIN_ADVANCE v1.5 ( #9700 )
2018-02-23 00:53:41 -06:00
Scott Lahteine
967076b080
Add LIGHTWEIGHT_UI to example configs
2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all ( #9756 )
2018-02-21 22:26:56 -06:00
Scott Lahteine
28e7562e7a
Add CODEPENDENT_XY_HOMING to example configs
2018-02-18 01:09:51 -06:00
Scott Lahteine
3a1fedaee6
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 15:41:20 -06:00
Bob-the-Kuhn
1647db8fad
Set CONTROLLER_FAN_PIN example to -1
2018-02-15 21:29:09 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... ( #9638 )
...
Will get this duplicated in bugfix_2.0.0 tomorrow...
2018-02-14 17:31:25 -06:00
Scott Lahteine
d89a61bd51
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:56:03 -06:00
Scott Lahteine
4f04f4e6b8
Followup to #9532
2018-02-08 03:39:20 -06:00
jaysonkelly
f8a8711075
I2C position encoders update
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 02:46:12 -06:00
Scott Lahteine
8438a57910
Followup to #9532
2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1
[1.1.x] Enable Z axis and delta sensorless homing ( #9532 )
2018-02-08 02:02:48 -06:00
Manuel Valentino
652162777b
[1.1.x] Fixed wrong information about TMC2208 wiring ( #9334 )
2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f
Add TMC software SPI ( #9362 )
2018-02-02 03:56:08 -06:00
Scott Lahteine
428fbe8228
Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:27:30 -06:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around ( #9227 )
...
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).
This causes the printer to say "Click to resume..."
This is a temporary fix until we figure out the correct way to resolve the issue.
More work needed for G26.
2018-01-17 22:51:19 -06:00
Scott Lahteine
8f08e029d8
More up-front option to show SD percentage
2018-01-14 23:30:59 -06:00
Scott Lahteine
d1ce0bc071
M915 Z Axis Calibration
2018-01-09 18:55:08 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x
...
[1.1.x] SLIM_LCD_MENUS option
2017-12-31 00:56:10 -06:00
Scott Lahteine
839dd66c3b
Synchronize configs with 2.0.x
2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9
Apply SLIM_LCD_MENUS to example configs
2017-12-30 23:52:53 -06:00
Scott Lahteine
d1cad5afa4
Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs
2017-12-30 18:22:31 -06:00
Scott Lahteine
00749d8ef0
Add pause/resume action to example configs
2017-12-25 01:28:16 -06:00
Thomas Moore
59d047c1d7
[1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8864 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-24 23:47:05 -06:00
Scott Lahteine
ab7f1a0608
A single setting to validate filament width
2017-12-19 21:34:30 -06:00
Scott Lahteine
e6f46f3832
Add NO_VOLUMETRICS to example configs
2017-12-19 20:32:40 -06:00
Scott Lahteine
9a4af6bd7c
Add NANODLP_ALL_AXIS to config examples
2017-12-15 16:05:29 -06:00
teemuatlut
0ac0324af2
[1.1.x] TMC driver update ( #8712 )
2017-12-15 15:02:39 -06:00
Scott Lahteine
6e85c060a9
Apply MULTIPLE_PROBING to example configs
2017-12-07 16:18:53 -06:00
Scott Lahteine
1f770bb103
Config updates, spacing mainly
2017-11-29 20:57:38 -06:00
Tannoo
e25567a5dd
New feature: LED_CONTROL_MENU
2017-11-29 20:57:38 -06:00
Scott Lahteine
fd50f452ff
Whitespace cleanup
2017-11-28 17:49:25 -06:00
Scott Lahteine
51d09bb9c9
Tweak BLOCK_BUFFER_SIZE config
2017-11-26 17:33:33 -06:00
Scott Lahteine
c0190eff00
Adapt MESH_EDIT_GFX_OVERLAY for 1.1.x
2017-11-24 15:54:02 -06:00
Rob Power
f8e30f49d7
Add NanoDLP Z movement synchronization option
...
Implemented synchronization message output for NanoDLP printers (nanodlp.com).
If optional feature is enabled in `Configuration_adv.h`, Marlin will ouput "Z_move_comp" string to serial after completing any G0/G1 Z-axis movements. This feature patched on previous versions(1.0) is used by NanoDLP to synchronize Z-axis movement with projector exposure in DLP stereolithography printers.
2017-11-24 00:32:03 -06:00
Scott Lahteine
8d06cf7b84
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:06:35 -06:00
Scott Lahteine
069ec3f9a9
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:06:40 -06:00
Scott Lahteine
513f25d42c
Remove redundant dual stepper driver entries
2017-11-08 20:26:54 -06:00
