esenapaj
d583ea852d
Standardize format description of Panel
2016-06-21 20:51:27 +09:00
esenapaj
aa6d35bd49
Move code block of probe to appropriate position
2016-06-21 20:36:46 +09:00
esenapaj
740fb2ce39
Adjust spacing
2016-06-21 19:37:45 +09:00
Scott Lahteine
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
2016-06-21 03:10:46 -07:00
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
2016-06-21 01:56:40 -07:00
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:25:26 -07:00
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
2016-06-19 18:47:27 -07:00
Scott Lahteine
f8c278ce4d
Cartesio UI display option in all configs
2016-06-19 17:39:46 -07:00
Scott Lahteine
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
2016-06-17 17:32:55 -07:00
Scott Lahteine
eab44b30d4
Safety and serial sections
2016-06-17 15:19:43 -07:00
Scott Lahteine
fc56a547d1
Rename movement section to motion
2016-06-17 15:19:43 -07:00
Scott Lahteine
1000563d80
Make M851 standard with a bed probe
2016-06-17 15:19:42 -07:00
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
2016-06-17 14:19:17 -07:00
Scott Lahteine
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
2016-06-16 17:22:48 -07:00
Scott Lahteine
ebbed2975e
Delete mysterious .swp files from #3609
2016-06-16 16:42:03 -07:00
Scott Lahteine
02e5dad29a
Include Croatian in language listings
2016-06-16 16:18:26 -07:00
Scott Lahteine
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
2016-06-15 22:09:47 -07:00
esenapaj
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
2016-06-15 00:10:15 +09:00
João Brázio
8ccd97e7cc
Updated all example configuration files
2016-06-12 00:36:15 +01:00
Reid Rankin
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
2016-06-08 16:51:10 -07:00
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-03 17:38:03 -07:00
Scott Lahteine
db0fd021d0
Z raise options independent of ABL so G28 can use them
2016-06-02 16:56:49 -07:00
Scott Lahteine
28fb1f8994
Tweak #endif comment for ABL GRID
2016-06-02 16:56:49 -07:00
Scott Lahteine
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 14:41:16 -07:00
Edward Patel
06593833ff
MBL: Move border macros to Configuration_adv.h
2016-05-30 20:50:16 +02:00
Edward Patel
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
2016-05-30 09:50:11 +02:00
Scott Lahteine
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
2016-05-26 18:50:43 -07:00
Scott Lahteine
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
2016-05-23 15:52:19 -07:00
Scott Lahteine
95fee8ca81
Add option for CoreYZ kinematics
2016-05-23 13:58:40 -07:00
Scott Lahteine
c5130fd23b
Additional instructions for controller reverse options
2016-05-20 18:14:50 -07:00
Scott Lahteine
69abfef82e
Add "SINGLENOZZLE" extruder option
2016-05-20 15:45:11 -07:00
Scott Lahteine
1a6c72cb57
Apply to the rest of the configs
2016-05-20 11:52:27 -07:00
Scott Lahteine
a469341555
Merge pull request #3800 from jbrazio/feature/move-felix-cfg
...
Moves Felix's dual configuration to a folder
2016-05-19 18:53:39 -07:00
João Brázio
80f05920c5
Moves Felix's dual configuration to a folder
2016-05-20 00:49:16 +01:00
Scott Lahteine
8218558953
Update comments, rename next_ping_ms, followup to #3797
2016-05-19 16:44:57 -07:00
Scott Lahteine
07c9a11c3c
Automatically set X2 stepper pins
2016-05-18 19:09:09 -07:00
Scott Lahteine
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
2016-05-17 13:57:38 -07:00
esenapaj
6d722716f7
Follow-up the PR #3720 and #3759
...
Update forgotten Configuration_DUAL.h
2016-05-15 14:08:45 +09:00
João Brázio
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
2016-05-14 15:22:45 -07:00
Scott Lahteine
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
2016-05-14 14:52:08 -07:00
Scott Lahteine
9f6b8f7d5b
Remove extra @section directive from configs
2016-05-14 14:51:09 -07:00
Scott Lahteine
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
2016-05-14 14:39:31 -07:00
AnHardt
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
2016-05-13 13:27:45 +02:00
Scott Lahteine
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
2016-05-12 11:59:46 -07:00
esenapaj
69511b5e5e
Follow-up the PR #3719(Harmonize LCD comment section)
...
It update forgotten Configuration_DUAL.h.
2016-05-12 19:16:36 +09:00
João Brázio
09150cae79
Individual Axis Homing LCD menu items
2016-05-11 19:28:19 -07:00
Scott Lahteine
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
2016-05-11 15:39:28 -07:00
João Brázio
85b2c80838
Updated example configurations
2016-05-11 01:45:49 +01:00
João Brázio
5373ac6373
Updated example configurations
2016-05-10 13:42:00 +01:00
esenapaj
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
2016-05-03 21:35:02 +09:00
esenapaj
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
2016-05-02 21:16:00 +09:00
Scott Lahteine
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
2016-05-01 13:12:51 -07:00
gralco
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
2016-05-01 13:12:51 -07:00
Scott Lahteine
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
2016-04-29 15:31:14 -07:00
João Brázio
e34f4653ef
Fixed a typo on the configuration files
2016-04-29 23:13:59 +01:00
João Brázio
27088e356f
Updated example configuration files
2016-04-29 23:13:59 +01:00
Scott Lahteine
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:28:46 -07:00
Scott Lahteine
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
2016-04-28 20:27:17 -07:00
Scott Lahteine
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
2016-04-27 20:06:40 -07:00
Scott Lahteine
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
2016-04-27 20:06:40 -07:00
João Brázio
7de0161204
Updated example config files
2016-04-24 05:21:17 +01:00
Scott Lahteine
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
2016-04-20 17:04:52 -07:00
Scott Lahteine
339b5b3e34
Patch more configs with new changes
2016-04-16 19:35:02 -07:00
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
Scott Lahteine
1cc622b167
Fix minor spelling in comments
2016-04-14 20:06:59 -07:00
Scott Lahteine
de8c0baf8b
Update some comments in Configuration.h
2016-04-14 16:41:20 -07:00
gralco
69c00aea4c
Include bed hysteresis setting in the example configs
2016-04-14 08:03:38 -06:00
Scott Lahteine
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:55:14 -07:00
Scott Lahteine
7eb476597f
Update some comments in Configuration.h
2016-04-13 20:34:42 -07:00
esenapaj
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
2016-04-13 20:34:12 -07:00
Scott Lahteine
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
2016-04-08 21:45:45 -07:00
jbrazio
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
2016-04-08 20:14:37 -07:00
Scott Lahteine
2eca8d63b3
Add DEFAULT_KEEPALIVE_INTERVAL setting
2016-04-07 19:25:56 -07:00
Scott Lahteine
868eebfdee
Simplify configuration of Z2 endstops
2016-04-02 16:39:23 -07:00
Scott Lahteine
e5771346a4
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
2016-04-02 16:39:23 -07:00
Scott Lahteine
ffe054c129
Fix comment about host keepalive interval
2016-04-01 17:28:08 -07:00
Scott Lahteine
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
2016-03-29 20:54:31 -07:00
Scott Lahteine
3b2d159abd
Relax the test for "Heating failed" errors
2016-03-27 07:02:10 -07:00
Scott Lahteine
53cc6cca46
Formalize some dependencies on PIDTEMPBED
2016-03-25 23:50:28 -07:00
Scott Lahteine
4b31c67dce
Add PID_AUTOTUNE_MENU option
2016-03-25 19:31:56 -07:00
Scott Lahteine
e08915a723
Fix comments in Configuration_adv.h
2016-03-25 19:31:31 -07:00
Scott Lahteine
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
2016-03-25 00:45:56 -07:00
jbrazio
5e5d250832
Added gplv3 header to all Marlin files
2016-03-24 18:01:20 +00:00
Scott Lahteine
da9d4c4caf
Merge pull request #3206 from esenapaj/patch-5
...
Follow-up the PR #3082 , etc
2016-03-24 00:20:25 -07:00
esenapaj
fc75e6f92d
Follow-up the PR #3082 , etc
...
Follow-up the PR #3082
Follow-up the commit 143ad74b0f5ba0
2016-03-22 20:22:01 +09:00
esenapaj
22299c13c1
Change link to the document
...
documentation/LCDLanguageFont.md moved to http://www.marlinfirmware.org/ at commit 12d0983757http://www.marlinfirmware.org/ isn't working.
2016-03-22 19:58:41 +09:00
Scott Lahteine
be08eb6153
Merge pull request #3194 from jbrazio/feature/add-pt_pt-utf8
...
Add pt_pt-utf8 language pack and fix some minor compiler warnings
2016-03-20 17:42:45 -07:00
Scott Lahteine
d1ff7959b7
Merge pull request #3188 from esenapaj/patch-1
...
follow-up the commit b82d91e
2016-03-20 17:39:52 -07:00
Scott Lahteine
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
...
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
2016-03-20 17:10:38 -07:00
jbrazio
1aa531a3db
Missing coma comment correction for all config files
2016-03-20 23:21:45 +00:00
jbrazio
68dda08fff
Added pt_pt-utf8 language pack; Fixed some minor compiler warnings; Harmonize file suffix for the current existing UTF8 language packs; Updated all configuration files to reflect the new language packs
2016-03-20 23:14:24 +00:00
esenapaj
468df96b0f
follow-up the commit b82d91e
...
follow-up the commit b82d91eca6
2016-03-20 20:57:14 +09:00
Scott Lahteine
32f75749e4
Merge pull request #3117 from Blue-Marlin/thermal-protection
...
Improve the descriptions for THERMAL_PROTECTION
2016-03-19 23:41:05 -07:00
esenapaj
37eaa1406b
follow-up the PR #3180
2016-03-20 15:33:02 +09:00
esenapaj
198d5d56fd
follow-up the PR #3183
2016-03-20 13:58:05 +09:00
Blue-Marlin
3166aed087
Improve the descriptions for THERMAL_PROTECTION
2016-03-19 14:08:59 +01:00
AnHardt
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
2016-03-19 02:00:08 -07:00
Scott Lahteine
9bf87aac6a
Merge pull request #3127 from thinkyhead/rc_core_babystepping
...
Implement BABYSTEPPING for COREXY and COREXZ
2016-03-18 23:25:26 -07:00
