Scott Lahteine
39a545b3f8
Patch up some verbiage in configs
2017-10-22 17:14:50 -05:00
Scott Lahteine
226fe192a1
Fix Neopixel Travis test
2017-10-22 16:54:11 -05:00
Roxy-3D
e9bc9a2ab4
change to better (more clear) names ( #8049 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 10:58:17 -05:00
tweichselbaumer
fa44130734
Add M290 babystepping ( #8014 )
...
* Add M290 babystepping
* Allow `Z` for `M290`
* fix spacing
* Support BABYSTEP_XY in M290
* Not just Z
* Extend M290 for BABYSTEP_ZPROBE_OFFSET
* tweak
2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 ( #8041 )
...
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
2017-10-21 00:24:22 -05:00
Scott Lahteine
1d5fb360cc
Merge pull request #8020 from thinkyhead/bf1_scroll_longnames
...
[1.1.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
2017-10-20 21:34:11 -05:00
Scott Lahteine
a7398a0459
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a
Add SCROLL_LONG_FILENAMES advanced option
...
Based on #7637 by @marcio-ao
2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2
BQ enables this in the config. Remove here
2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270
Simplify Cartesian probing bounds
...
Followup to #8011
2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33
boolval revised ( #8017 )
2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8011 )
2017-10-18 10:03:00 -05:00
Scott Lahteine
10d72f31c2
Merge pull request #7991 from thinkyhead/bf1_M106_memorize
...
[1.1.x] Add EXTRA_FAN_SPEED feature
2017-10-16 05:19:32 -05:00
studiodyne
e04902f589
Add EXTRA_FAN_SPEED feature
2017-10-16 02:32:30 -05:00
Scott Lahteine
31d0b77df7
Fix usage line in temperature table script
2017-10-16 00:17:06 -05:00
Scott Lahteine
9e82533eb9
Fix spelling in temperature table script
2017-10-16 00:16:25 -05:00
Scott Lahteine
4410aac60b
Update temp table script for current format
2017-10-16 00:14:02 -05:00
Scott Lahteine
d63d08ef8b
Merge pull request #7948 from gallynero/patch-1
...
Enable change feedrate in delta
2017-10-15 16:28:45 -05:00
Scott Lahteine
5911dc597a
Merge pull request #7988 from thinkyhead/bf1_progress_percentage
...
Add Capability BUILD_PERCENT
2017-10-15 03:12:31 -05:00
Scott Lahteine
5c2ff6ed19
Add Capability BUILD_PERCENT
2017-10-15 03:01:36 -05:00
Scott Lahteine
6efad5e495
Merge pull request #7986 from thinkyhead/bf1_progress_percentage
...
[1.1.x] Add M73 (LCD_SET_PROGRESS_MANUALLY)
2017-10-15 02:43:30 -05:00
Scott Lahteine
5f708d47ce
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 02:21:09 -05:00
Scott Lahteine
23dbaaf03b
Merge pull request #7983 from thinkyhead/bf1_micromake_c1
...
[1.1.x] Micromake C1 Configurations, French for HD44780
2017-10-14 20:30:06 -05:00
Scott Lahteine
3b4b9c6d68
Unaccented French for Character Display
2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7
Add control board MAKEBOARD Mini
...
+Add French language without accent for japanese LCD
2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946
Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops
...
[1.1.x] Software endstop options by axis
2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b
Split the software endstop capability by axis.
...
Based on #7975 and #7979
2017-10-14 17:14:08 -05:00
Scott Lahteine
0976d22225
Merge pull request #7977 from thinkyhead/bf1_fix_emergency_parser
...
[1.1.x] Fix Emergency Parser
2017-10-14 17:13:04 -05:00
Scott Lahteine
e17869ca20
Fix Emergency Parser
...
Followup to #7459
2017-10-14 15:58:07 -05:00
Scott Lahteine
1c3d06876e
Merge pull request #7965 from thinkyhead/bf1_ubl_remove_z_offset
...
[1.1.x] Unify Z fade factor
2017-10-14 02:57:13 -05:00
Scott Lahteine
662105c1b6
ADC sensor fix inspired by 'Evgen2' on Twitter
2017-10-14 02:39:13 -05:00
Scott Lahteine
b8ddae61e2
ubl_state no longer needed
2017-10-14 02:39:13 -05:00
Scott Lahteine
ece14af556
Improve LCD leveling value edits
2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c
Add HAS_MESH conditional
2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc
General cleanup, apply const
2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0
Move leveling_is_active to a macro
2017-10-13 16:11:27 -05:00
Scott Lahteine
fcd3b326e9
Merge pull request #7961 from thinkyhead/bf1_ubl_remove_z_offset
...
[1.1.x] Remove obsolete UBL z_offset
2017-10-13 09:06:38 -05:00
Scott Lahteine
3d5b10735f
Remove obsolete UBL z_offset
2017-10-13 08:23:01 -05:00
gallynero
94228d4522
Enable change feedrate in delta
...
Enable change the relative feedrate on a printing job in delta machines with UBL
2017-10-12 01:55:51 +02:00
Scott Lahteine
f054f566b4
Merge pull request #7918 from thinkyhead/bf1_neopixel_full
...
[1.1.x] Different NEOPIXEL types
2017-10-10 02:35:56 -05:00
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1
Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance
...
[1.1.x] Remove legacy ADVANCE feature
2017-10-10 00:31:39 -05:00
Scott Lahteine
98c7bde514
Merge pull request #7917 from thinkyhead/bf1_lcd_segmented_moves
...
[1.1.x] Segmented manual moves for kinematics
2017-10-10 00:28:44 -05:00
Scott Lahteine
38110e220d
Segmented manual moves for kinematics
2017-10-09 23:10:17 -05:00
Scott Lahteine
75e4867d22
Merge pull request #7915 from thinkyhead/bf1_probeless_ubl
...
[1.1.x] Allow UBL G29 and G26 to build without a probe
2017-10-09 18:59:01 -05:00
deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
2017-10-09 18:37:53 -05:00
Scott Lahteine
73c5675485
Merge pull request #7867 from thinkyhead/bf1_add_some_lcds
...
[1.1.x] Add support for 4 new LCDs
2017-10-09 18:27:42 -05:00
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
...
Based on #7447 by @Bob-the-Kuhn
2017-10-09 17:39:03 -05:00
