5371 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
AnHardt	a129078927	Add an emergency-command parser to MarlinSerial (supporting M108) ... Add an emergency-command parser to MarlinSerial's RX interrupt. The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer. To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered. This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`". The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character. One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`. In that case the host should send "\ncommand\n" Also introduces M108 to break the waiting for the heaters in M109, M190 and M303. Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.	2016-07-07 16:37:22 -07:00
Scott Lahteine	4e84c803a3	Merge pull request #4232 from thinkyhead/rc_no_axis_codes_needed ... Don't use axis_codes if a literal will do	2016-07-06 20:05:16 -07:00
Scott Lahteine	e2f7cb0905	Don't use axis_codes if a literal will do	2016-07-06 18:37:21 -07:00
Scott Lahteine	e76aa9d79a	Merge pull request #4231 from thinkyhead/rc_fix_homing_raise ... Fix comment on Z raise for homing, save a few bytes	2016-07-06 16:23:29 -07:00
Scott Lahteine	6559f7359f	Fix comment on Z raise for homing, save a few bytes	2016-07-06 16:21:51 -07:00
Scott Lahteine	799c60cadc	Merge pull request #4217 from thinkyhead/rc_fix_homing_raise ... Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING	2016-07-06 14:39:37 -07:00
Scott Lahteine	99a5a5dd65	Merge pull request #4228 from petrzjunior/patch-1 ... [LANGUAGE] Update Czech (filament change and info)	2016-07-06 14:00:31 -07:00
Scott Lahteine	d7e9647505	Sanity Check for probe raises	2016-07-06 13:46:06 -07:00
Scott Lahteine	d0b29cabf3	Don't re-home X and Y if you quick homed	2016-07-06 13:46:06 -07:00
Scott Lahteine	e0a6b978f5	Don't do_probe_raise with MIN_Z_HEIGHT_FOR_HOMING	2016-07-06 13:46:05 -07:00
petrzjunior	b81b77111b	Update language_cz.h	2016-07-06 21:04:34 +02:00
Scott Lahteine	7735ec5e7a	Merge pull request #4223 from thinkyhead/rc_rename_heatup ... Change cancel_heatup to wait_for_heatup	2016-07-06 11:25:44 -07:00
Scott Lahteine	160a2be117	Change cancel_heatup to wait_for_heatup	2016-07-06 09:17:50 -07:00
Scott Lahteine	cb17871a48	Merge pull request #4207 from AnHardt/AllenKey2 ... Clean up, simplify and generalize the Allen-key-probe code.	2016-07-05 19:34:36 -07:00
AnHardt	16c83d203b	Make use of the good features of a sled probe for all probes. ... Move and extend axis_unhomed test to deploy/stow_z_probe(). Move and extend position store/restore to deploy/stow_z_probe(). Now all kinds of probes can use the 'E' parameter in G29/M48. Allen key probes can be used now for grid and 3-point levelling. Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis. Throw a compile time error when we try to configure an Allen Key probe homing to z-min and having no other z-min-endstop.	2016-07-06 04:11:04 +02:00
AnHardt	8555816a11	Generalize and simplify 'triggered when stowed test` ... The `PROBE_IS_TRIGGERED_WHEN_STOWED_TEST` is able to detect if a probe is successfully deployed/stowed. It was part of the Allen Key probes code only. Now the function is generally available. Currently this test is compulsory for Allen Key probes to not alter the used behaviour If you want to add the test for an other type of probe simply add ``` #define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST ``` to your config.	2016-07-06 03:56:17 +02:00
AnHardt	5126cce7fd	Move Allen Key probe move scripts to their own functions ... There was an hidden extra move after the scripts. This is configurable now. Added the extra moves to the relevant configs.	2016-07-06 03:46:40 +02:00
AnHardt	7d063c111c	Add a optional feedrate parameter to do_blocking_move() ... Add a optional feedrate parameter to `do_blocking_move()` and its companions.	2016-07-06 03:46:34 +02:00
Scott Lahteine	90d8bb53e8	Merge pull request #4214 from thinkyhead/fix_clear_command_queue ... Allow the command queue to be cleared by commands, lcd menus	2016-07-05 16:35:55 -07:00
Scott Lahteine	b114b6a0b3	Save 152 bytes using uint8_t for command indices	2016-07-05 16:29:28 -07:00
Scott Lahteine	0d4ff0c48b	Allow the queue to be cleared from within commands	2016-07-05 16:25:20 -07:00
Scott Lahteine	c450851401	Merge pull request #4209 from AnHardt/too-high-G28 ... Make raise for probe deploy relative in homeaxis()	2016-07-05 11:07:42 -07:00
Roxy-3D	a3f350e728	Merge pull request #4212 from AnHardt/MBL-typo ... MBL typo	2016-07-05 11:49:29 -05:00
AnHardt	f799f18388	MBL typo	2016-07-05 18:19:53 +02:00
AnHardt	8b02e68cb6	Make raise for probe deploy relative in homeaxis() ... Make raise for probe deploy relative in homeaxis() by setting `current_position[axis]` to zero later.	2016-07-05 10:42:33 +02:00
Scott Lahteine	e48502866b	Merge pull request #3611 from alephobjects/M108_cancel_heatup ... Introduce M108 cancel wait for heatup/cooldown of the hotend and bed	2016-07-04 01:19:31 -07:00
Scott Lahteine	d70197f514	Merge pull request #4204 from thinkyhead/rc_fix_gcode_t_position ... Additional patches for gcode_T position change	2016-07-04 01:16:22 -07:00
Scott Lahteine	869b517589	Merge pull request #4205 from thinkyhead/rc_fixup_unit_references ... References to millimeters in code comments need an update	2016-07-04 01:15:34 -07:00
Scott Lahteine	e104b91ea6	References to millimeters in code comments need an update	2016-07-03 20:13:29 -07:00
Scott Lahteine	e604c0955e	Merge pull request #4203 from AnHardt/rem_wants_to_cool_warning ... Remove wants_to_cool uninitialized warning	2016-07-03 18:24:23 -07:00
AnHardt	ff91d28a3a	Remove wants_to_cool warning ... Remove wants_to_cool warning	2016-07-04 03:12:11 +02:00
Scott Lahteine	c9e536cf87	Additional patches for gcode_T position change	2016-07-03 18:11:02 -07:00
Scott Lahteine	60865fc45b	Merge pull request #4202 from thinkyhead/rc_fix_gcode_t_position ... Fix position adjustment with gcode_T and MBL	2016-07-03 17:55:43 -07:00
Scott Lahteine	f841038313	Merge pull request #4201 from thinkyhead/rc_info_fit ... Shorter labels for Print Stats info	2016-07-03 17:47:00 -07:00
Scott Lahteine	f31af61ee2	Fix position adjustment with gcode_T and MBL	2016-07-03 17:44:04 -07:00
Scott Lahteine	a8f5c2bf96	Merge pull request #4192 from birkett/k8400 ... Add Velleman K8400 board support.	2016-07-03 17:41:13 -07:00
Scott Lahteine	ef8980bfa0	Shorter labels for Print Stats info	2016-07-03 16:00:24 -07:00
Scott Lahteine	4fff9872b9	Merge pull request #4200 from thinkyhead/rc_cleanup_m600 ... Fix compiler warnings for static screens	2016-07-03 15:44:20 -07:00
Scott Lahteine	2ed625dafa	Fix compiler warnings for static screens	2016-07-03 15:26:17 -07:00
Anthony Birkett	e77844594d	readme.md -> README.md	2016-07-03 22:15:24 +01:00
Anthony Birkett	a0b00d29e3	Add a ported example configuration for the Velleman K8400 (Vertex) printer. ... Supports both dual and single head printers (with the correct config). Includes community sourced feed rate fix. Rename / move files. Remove redundant definitions.	2016-07-03 22:09:08 +01:00
Scott Lahteine	5a81c132a2	Merge pull request #4199 from lrpirlet/G28_X_drills_a_hole_in_printed_part ... apply correction when swtiching from MBL to physical in G28 X	2016-07-03 13:37:38 -07:00
lrpirlet	9b42c6b44b	apply correction when swtiching from MBL to physical in G28 X	2016-07-03 21:43:42 +02:00
Scott Lahteine	1236a3b3ab	Merge pull request #4189 from esenapaj/Follow-up-the-PR-#3662 ... Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature)	2016-07-02 17:16:09 -07:00
esenapaj	95347fc650	Follow-up the PR #3662 (Rewritten FILAMENT_CHANGE_ENABLE feature) ... ・Update a forgotten Configuration_adv.h of Cartesio	2016-07-03 09:04:29 +09:00
Scott Lahteine	b37e727072	Merge pull request #3662 from thinkyhead/rc_fixup_auto_filament_change ... Rewritten FILAMENT_CHANGE_ENABLE feature	2016-07-02 16:20:20 -07:00
Scott Lahteine	a06c5165a7	Shorter strings for smaller LCDs	2016-07-02 15:47:16 -07:00
Scott Lahteine	982f10e6a0	Use STATIC_ITEM for LCD message display	2016-07-02 15:47:15 -07:00
Petr Zahradnik	43ff0ce35f	Rewritten FILAMENT_CHANGE_ENABLE feature	2016-07-02 15:34:33 -07:00
Scott Lahteine	4a8e191cec	Merge pull request #4188 from thinkyhead/rc_birkett_info_menu_jul2 ... Printer information menu	2016-07-02 15:30:00 -07:00