3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-28 06:21:31 +00:00
Code Issues Releases Wiki Activity
9,221 Commits 21 Branches 81 Tags 1.9 GiB
ca76c3df7a
Commit Graph

7610 Commits

Author SHA1 Message Date
Bob-the-Kuhn
d0e61d82c0 TMC2208 sanity check 2018-01-18 23:16:41 -06:00
Roxy-3D
0edf5a2ab5
Better handle serial over runs... 2018-01-18 16:51:27 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run 2018-01-18 16:48:12 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations 2018-01-18 14:38:18 -06:00
GMagician
3b53c5ada1 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:35:08 +01:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
80c1afde0f
Fix mesh size... 2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Scott Lahteine
333bd8f394
Merge pull request #9203 from benlye/m73-bugfix-1.1.x 
[1.1.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:31 -06:00
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
blye
deda3d3a3c Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
Bob-the-Kuhn
ec028faa1b
Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps 
[1.1.x] Fix missing deceleration steps
 2018-01-15 21:03:51 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Tommie Gannert
f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
 2018-01-15 03:39:43 -06:00
Scott Lahteine
a16ae30a61 More featureful CR-10S configuration 2018-01-15 01:02:23 -06:00
Scott Lahteine
175207659a
Merge pull request #9183 from thinkyhead/bf1_new_flsun_config 
[1.1.x] Add FLSUN Kossel configuration
 2018-01-15 00:49:25 -06:00
Scott Lahteine
5129eb1d43 More reliable temperature serial output? 2018-01-15 00:44:55 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
5c6c12dc3a Patch EEPROM for 32-bit 2018-01-14 23:18:45 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
1d5eba4470 Add FLSUN Kossel configuration 2018-01-14 23:18:45 -06:00
Scott Lahteine
758d9db964 Link to marlinfw.org bitmap tool 2018-01-14 22:39:57 -06:00
Scott Lahteine
1d8b03964f
Merge pull request #9164 from GMagician/1.1.x-SD-issues-fix 
[1.1.x] sd issue fix
 2018-01-14 20:47:04 -06:00
Sebastianv650
4fa0937a55 Fix missing deceleration steps 
Marlin never reached final_speed after deceleration.
 2018-01-14 17:09:47 +01:00
GMagician
82dc89bfd2 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 09:46:54 +01:00
GrantM11235
a0bd811093 [1.1.x] Fix support for Malyan M150 (#9146) 
Implements changes to LCD and encoder pins from
forums.reprap.org/read.php?110,716538,728278 and also sets
ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
 2018-01-12 01:14:07 -06:00
Scott Lahteine
c1d6d24b9d Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Sebastianv650
e2871f0dcd [1.1.x] Ensure smooth printer movements (#9149) 
- Never execute a block without an up-to-date trapezoid
- Start blocks with MINIMUM_PLANNER_SPEED, except when coming from a full stop
 2018-01-11 18:50:18 -06:00
Bob-the-Kuhn
4393c3ef7f LCD_CONTRAST to uint16_t for 1.1.x parity (#9148) 2018-01-11 18:32:41 -06:00
Scott Lahteine
e8b1bbac83 Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:03:34 -06:00
Scott Lahteine
885200f833 Bring other configs up-to-date 2018-01-11 01:03:34 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
d1ce0bc071 M915 Z Axis Calibration 2018-01-09 18:55:08 -06:00
Scott Lahteine
9714c9aebe
Merge pull request #9128 from fiveangle/bf1-disable_serial_stats_on_usbcon 
[1.1.x] SERIAL_STATS_* features not supported on USBCON targets
 2018-01-09 18:42:26 -06:00
Dave Johnson
2fcef3e8e2 Enable USE_ZMIN_PLUG on SCARA example (#9125) 2018-01-09 18:41:02 -06:00
Dave Johnson
dd55c98139 SERIAL_STATS_* features not supported on USBCON targets 2018-01-09 16:27:57 -08:00
Scott Lahteine
bb5ba482bc More EEPROM field debugging 2018-01-09 18:10:33 -06:00
GMagician
5903b002ac 1.1.x semitec 104NT-4 added (#9120) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:44 -06:00
Anthony
1326eb4ef7
fix fwretract structure reference #9102 
Marlin_main.cpp: In function 'void resume_print(const float&, const float&, int8_t)':

Marlin_main.cpp:6646: error: 'retract_length' was not declared in this scope
         do_pause_e_move(-retract_length, fwretract.retract_feedrate_mm_s);
                          ^
 2018-01-08 18:48:19 -06:00
Scott Lahteine
0eee55c0dd Patch TMC current read from EEPROM 2018-01-07 20:49:43 -06:00
Scott Lahteine
f8dee4e726
Merge pull request #9088 from thinkyhead/bf1_mbl_localize 
[1.1.x] MBL cleanup, has_mesh() method
 2018-01-07 20:10:10 -06:00
Tannoo
2c3bdfe2ea [1.1.x] UBL Mesh Storage Message (#9094) 2018-01-07 20:07:20 -06:00
Scott Lahteine
ffeb4495fe Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
eec97a5cf1 Don't wrap mbl.h in conditionals 2018-01-07 00:24:46 -06:00
Scott Lahteine
fa3709451b
Set mbl.has_mesh on manual point entry 
Based on #9086
 2018-01-06 23:32:00 -06:00
Scott Lahteine
eaa6257baf
Fix M503 skew output 
Followup to 1761cacaa1
 2018-01-06 20:53:33 -06:00
Someone Unknown
b5e98ac1b7 Set laser/spindle PWM to lowest speed on M5 2018-01-06 14:01:58 -06:00
GMagician
4cb35a285b Bmp fix 
Clockwise arrow fixed
 2018-01-06 19:08:37 +01:00
Bob-the-Kuhn
0b5b2a424c
Merge pull request #9067 from MarlinFirmware/SD-detect 
[bugfix-1.1.x] SD card detect fix
 2018-01-05 20:32:33 -06:00
Bob-the-Kuhn
0868907359 works 2018-01-05 19:12:34 -06:00
Scott Lahteine
670df2ea6d Settings FIELD_TEST fix 2018-01-05 19:12:22 -06:00
Scott Lahteine
fbda8a2e2b UBL G29 works without settings.load 2018-01-05 15:47:52 -06:00
Scott Lahteine
3d34dddbc0 Squish lcd_advanced_pause_show_message 2018-01-05 15:47:52 -06:00
Scott Lahteine
3b3b7e09ec Add FIELD_TEST to validate storage 2018-01-05 15:47:52 -06:00
Scott Lahteine
5d26f88bd5 Add data size validation 2018-01-05 15:47:52 -06:00
Scott Lahteine
51977c64ee Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Scott Lahteine
42216f52ab Add MarlinSettings::validate() 2018-01-05 14:40:20 -06:00
Scott Lahteine
760c4e94d5 Write filler for disabled volumetrics 2018-01-05 10:20:17 -06:00
Scott Lahteine
a4e0fd7883 Pretty up TMC current write 2018-01-05 10:20:16 -06:00
Scott Lahteine
2287fa126c Whitespace cleanup 2018-01-05 10:19:15 -06:00
Scott Lahteine
fd4f49512d
Merge pull request #9054 from thinkyhead/bf1_fwretract_class 
[1.1.x] FWRetract class for 2.0.x parity
 2018-01-04 19:40:32 -06:00
MD
7d8acb8def [1.1.x] CheapTRONIC v2.0 pins additions/revisions (#9030) 2018-01-04 18:34:47 -06:00
Scott Lahteine
e7bf7e6031 Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
Scott Lahteine
2ed4d4a30a Squish down process_parsed_command 2018-01-04 16:30:12 -06:00
Roxy-3D
d2dc7a53c2
use SERIAL_EOL(); instead of new line string 2018-01-04 16:18:00 -06:00
Roxy-3D
80cc860810
Use SERIAL_EOL(); instead of passing new line string 2018-01-04 16:16:28 -06:00
Roxy-3D
39289a6952
add precision to planner.xy_skew_factor so it doesn't print as 0.00 2018-01-04 16:11:05 -06:00
Roxy-3D
1761cacaa1
Add precision to planner:xy_skew so it doesn't print as 0.00 2018-01-04 16:07:20 -06:00
Scott Lahteine
f33b405152 M603 report in load/unload order 2018-01-04 05:20:56 -06:00
revilor
aec65112b5 Fix for issue #9005, #8942 - Bed PID autotuning (#9037) 2018-01-04 03:26:29 -06:00
Scott Lahteine
cce91eef61 Patch M701 get extruder arg 2018-01-04 02:13:10 -06:00
Scott Lahteine
46a839cbca No default needed 2018-01-03 22:52:25 -06:00
Scott Lahteine
c5e31b1723
Merge pull request #9032 from tcm0116/1.1.x-ultralcd 
[1.1.x] Fix 'lcd_temp_menu_e0_filament_change' was not declared error
 2018-01-03 21:34:37 -06:00
Scott Lahteine
01e3ccfd69 Cleanup, commentary of M303 pid tuning code 2018-01-03 20:48:43 -06:00
Scott Lahteine
a436e89b83 Fix resume_print positioning 2018-01-03 20:12:44 -06:00
Thomas Moore
faf7dda9d3 Fix 'lcd_temp_menu_e0_filament_change' was not declared error 2018-01-03 19:18:34 +00:00
Tannoo
d3139e47f8 [1.1.x] EEPROM init fix (#9002) 2018-01-03 04:28:15 -06:00
Thomas Moore
586d50ff99 Fix UBL compilation warnings 2018-01-02 19:41:02 -06:00
Scott Lahteine
ba9879f8fa
Merge pull request #9008 from karkla/bugfix-1.1.x 
[1.1.x] Update pins_MKS_BASE.h with Microstepping pin definitions
 2018-01-01 18:47:59 -06:00
Scott Lahteine
3cd48db9a9
Merge pull request #8983 from ABH10/bugfix-1.1.x_thermistor-tables 
[1.1.x] Update of comments in thermistor table files. No functional changes.
 2018-01-01 18:40:29 -06:00
karkla
454a8ae26a
Update pins_MKS_BASE.h 
Microstepping Pins (reverse engineered at V1.4)
Some new batches have the HR4982 (Heroic) instead of the A4982 (Allegro) as stepper driver. While most of the functionality is similar, the HR variant obviously doesn't work with diode smoothers (no fast decay). But the Heroic has a 128 µStepping mode where the A4982 is doing quarter steps (MS1=L / MS2=H). To achieve comfortable tests with the M350/M351 commands, the following definitions have to made.
 2018-01-02 01:29:27 +01:00
Scott Lahteine
9de9e37539 Some temperature code cleanup 2018-01-01 18:03:43 -06:00
Roxy-3D
949191215b
Z BabyStepping should not be dependent on a bed leveling system being active 2018-01-01 14:39:28 -06:00
Arne Husth
decf844788 Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
Scott Lahteine
642dec3625 Fix typo in delta buffer_line call 
Fix #8901
 2017-12-31 01:38:36 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x 
[1.1.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:10 -06:00
Scott Lahteine
5f13e2e336
Merge pull request #8977 from thinkyhead/bf1_sync_up_configs 
[1.1.x] Synchronize configs with 2.0.x
 2017-12-31 00:55:39 -06:00
Scott Lahteine
4153d76810
Update Marlin_main.cpp 2017-12-31 00:24:57 -06:00
houseofbugs
a66811a597 A specific option to SLIM_LCD_MENUS 2017-12-31 00:15:24 -06:00
Scott Lahteine
839dd66c3b Synchronize configs with 2.0.x 2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9 Apply SLIM_LCD_MENUS to example configs 2017-12-30 23:52:53 -06:00
Thomas Moore
81193e9338 Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
Scott Lahteine
d1cad5afa4 Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs 2017-12-30 18:22:31 -06:00
Scott Lahteine
2a535bdce8 Followup to #8964 2017-12-30 16:47:26 -06:00
Claus Näveke
52244f690e Add example config for Tronxy X1 (#8964) 2017-12-30 16:38:42 -06:00
Scott Lahteine
2385c06696 Apply some PGM_P pointers 2017-12-30 04:16:50 -06:00
Scott Lahteine
81e0f5bc7d Single pause flag also indicates SD print pause 2017-12-30 04:16:50 -06:00
Scott Lahteine
18e277d9d3 Enqueue commands properly in ultralcd.cpp 2017-12-30 04:16:50 -06:00
Scott Lahteine
025a4558fb
Merge pull request #8944 from zarthcode/patch-1 
Fix malformed Capabilities report
 2017-12-28 21:06:23 -06:00
Scott Lahteine
85ca7fed93 Show bedlevel with Bed temp indicator 
…and display a third extruder on character display
 2017-12-28 20:21:47 -06:00
Anthony
7637eb863a
Fix malformed Capabilities report 2017-12-28 20:03:44 -06:00
Marcio Teixeira
6195f7810a Multi extruder support for M600 and LCD (FR #8672) 2017-12-26 22:59:05 -06:00
Scott Lahteine
ecba9b6738
Merge pull request #8897 from thinkyhead/bf1_lcd_click_redraw 
[1.1.x] Clear lcd_clicked on use
 2017-12-26 20:54:31 -06:00
Scott Lahteine
417bdb0488 Fix bug in NO_VOLUMETRICS 2017-12-26 19:56:22 -06:00
Timothy Hoogland
8ea3b29c17 Fix NO_VOLUMETRICS compile error 2017-12-26 19:32:09 -06:00
Scott Lahteine
81f1001b2c Clear lcd_clicked immediately on use 2017-12-25 21:50:58 -06:00
Scott Lahteine
5f0026893f Fix some compiler warnings 2017-12-25 08:51:35 -06:00
Scott Lahteine
4f943a73bc Fixes for G29 / 3POINT 2017-12-25 08:35:47 -06:00
Scott Lahteine
e31923be8d lcd_map_control deps on ULTIPANEL 2017-12-25 07:44:32 -06:00
Scott Lahteine
55848a4bd8 Allow consecutive uses of G29 2017-12-25 06:32:55 -06:00
Scott Lahteine
3c7cdcdc22 General cleanup of config-store, reset_bed_level 2017-12-25 04:23:52 -06:00
Scott Lahteine
e0d487e339 Update TMC2208 config store 2017-12-25 04:08:39 -06:00
Scott Lahteine
defff1e4a8 Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
Scott Lahteine
05a6d48753 Tweak to M125 code 2017-12-25 01:33:46 -06:00
silentninja1
b12eb33feb Add support for pause and resume action commands on M600 2017-12-25 01:28:17 -06:00
Scott Lahteine
00749d8ef0 Add pause/resume action to example configs 2017-12-25 01:28:16 -06:00
Thomas Moore
59d047c1d7 [1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-24 23:47:05 -06:00
Scott Lahteine
fb6b62a01b Comment return false in motion functions 2017-12-24 22:56:56 -06:00
Scott Lahteine
e47316c9d3 Tweak cleaning buffer / SD finished command 2017-12-24 20:33:58 -06:00
Scott Lahteine
88c0688961 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:49:51 -06:00
Scott Lahteine
aa9cad0cc6
Merge pull request #8870 from petrzjunior/bugfix-1.1.x 
[1.1.x][Language] Update Czech for Dec 2017
 2017-12-24 18:48:37 -06:00
Scott Lahteine
0950527437
Fix WELCOME_MSG in PT 
From #8879
 2017-12-24 18:45:16 -06:00
Scott Lahteine
b7306ef07f
Fix WELCOME_MSG in PT 
From #8879
 2017-12-24 18:42:50 -06:00
Petr Zahradník
0fc3fea8df
Update Czech language Dec 2017 2017-12-22 18:33:11 +01:00
Scott Lahteine
b5677907d0 Minor speedup for SCARA scaling 
And cleanup of Delta IK macros...
 2017-12-21 22:39:06 -06:00
Scott Lahteine
6f40d57e14
Merge pull request #8851 from thinkyhead/bf1_more_scara_scaling 
[1.1.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
 2017-12-21 21:35:19 -06:00
Scott Lahteine
fdd85a529a Feedrate scaling for G2/G3 2017-12-20 19:33:16 -06:00
Scott Lahteine
477e36afab Revert "[bugfix-1.1.x] COREXY stutter moves (planner.cpp changes) (#8697)" 
This reverts commit 86b65e52c4.
 2017-12-20 15:59:56 -06:00
Scott Lahteine
1068798465 Restore position_float to LIN_ADVANCE 2017-12-20 06:58:42 -06:00
Scott Lahteine
4f375cd17d Match sign for filwidth across vars 2017-12-20 00:17:32 -06:00
Thomas Moore
98159c0507 [1.1.x][PlatformIO] Stop compiling after first five errors (#8828) 2017-12-19 23:59:19 -06:00
Scott Lahteine
ea345b1db7
Merge pull request #8738 from lumbric/bugfix-1.1.x 
Add missing CPP files to Make file, fixes #8731
 2017-12-19 23:46:23 -06:00
Scott Lahteine
ab7f1a0608 A single setting to validate filament width 2017-12-19 21:34:30 -06:00
Scott Lahteine
3929deed10 Add VOLUMETRIC capability item 2017-12-19 20:33:57 -06:00
Scott Lahteine
435981056e Option to disable all volumetric extrusion 2017-12-19 20:33:41 -06:00
Scott Lahteine
e6f46f3832 Add NO_VOLUMETRICS to example configs 2017-12-19 20:32:40 -06:00
Scott Lahteine
1aea024589 Remove redundant serial sanity check 2017-12-19 19:07:20 -06:00
Scott Lahteine
ce6a691999 Fix #8839 - filament width sensor 2017-12-19 18:24:56 -06:00
Scott Lahteine
10d73155b0 Hide LEVELING item for probeless w/out LCD Leveling 2017-12-17 21:24:46 -06:00
Scott Lahteine
4b1b02a17d Cleanup M503 output for M420 2017-12-17 21:24:46 -06:00
Scott Lahteine
56d355f8de Revert "[Bugfix-1.1.x] initial step correction (#8735)" 
This reverts commit ec028bf747.
 2017-12-17 02:04:44 -06:00
Scott Lahteine
f5fc851925 Sanity check parity with 2.0.x 2017-12-17 00:56:44 -06:00
Scott Lahteine
7378905053 Add MKS_12864OLED_SSD1306 to example configs 
Followup to #8813
 2017-12-16 19:58:34 -06:00
Dan Delaney
df8420aa62 Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
lumbric
3a511e4583 Add all CPP files to Makefile automatically 
Fixes build errors occurring when AUTO_BED_LEVELING_UBL is enabled.
 2017-12-16 20:29:47 +01:00
Dan Delaney
5249765508 Adding support for the Tronxy and Zonestar LCD 
Code borrowed and modified from erikkallen/Marlin_tronxy.
Changed the ANET_KEYPAD_LCD to zonestar, since it is the same device.
I kept a define for ANET_KEYPAD_LCD to enable ZONESTAR_LCD.
 2017-12-15 19:13:31 -06:00
Scott Lahteine
fdf83f1416 Apply ZONESTAR_LCD to example configs 2017-12-15 19:13:31 -06:00
Scott Lahteine
e1b998e40a More externs and functions in Marlin.h 2017-12-15 18:18:26 -06:00