elgambitero
ddf6603d81
Spanish language updated. Bug fixes on dialogs.
2012-09-26 19:11:45 +02:00
elgambitero
4bf8b1aeee
fesfas
2012-09-26 19:05:31 +02:00
elgambitero
7afd202b89
New dialogs translated to spanish. Bug fixes.
...
Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the
screen size.
2012-09-25 19:16:57 +02:00
elgambitero
ebc4601185
Some new dialogs translated to Spanish
2012-09-25 19:08:44 +02:00
ZetaPhoenix
8ac5b29e02
Changes to M119 response for easier visual comparison
...
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
2012-09-16 14:51:24 -07:00
ZetaPhoenix
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
2012-09-15 15:25:49 -07:00
ZetaPhoenix
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
2012-09-14 21:48:49 -07:00
ErikZalm
ba898faa7d
Merge pull request #249 from gwelchc/patch-2
...
Slight modification for byte savings
2012-09-14 12:13:36 -07:00
ErikZalm
0152ee71a5
Merge pull request #248 from gwelchc/patch-1
...
Binary representation for characters in ultraldc.pde
2012-09-14 12:10:28 -07:00
G. W. C.
6ccbfeb80c
Update Marlin/Marlin.pde
...
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.
This modification saves a few bytes that can be used to add support for new commands.
2012-09-14 16:38:54 +03:00
G. W. C.
c433142abf
Update Marlin/ultralcd.pde
...
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.
This is not a code modification as much as a readibility modification.
2012-09-14 16:29:43 +03:00
andrey-vasilyev
1d389ad3a8
Fix M81 not working reliably on Gen7
...
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
2012-09-13 19:23:48 +04:00
ZetaPhoenix
e8c92e0a95
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
2012-09-09 16:06:02 -07:00
Erik vd Zalm
abf0693e8e
Added KILL_PIN -1 to gen7 boards
2012-09-04 08:20:27 +02:00
Erik vd Zalm
47319cf64e
Fixed typo in SF arc fix code.
2012-09-03 21:28:31 +02:00
Erik vd Zalm
e358a2d7af
Added fix for SF Arc Point fillet procedure
2012-09-02 01:12:49 +02:00
ErikZalm
044a64a1fb
Merge pull request #225 from Justblair/Marlin_v1
...
Added PDF file containing Menu Tree for documentation purposes.
2012-09-01 04:41:49 -07:00
Drakelive
d728e35658
Update Marlin/pins.h
2012-08-30 23:36:49 +03:00
Blair Thompson
dcd3e8a211
Tidy up
2012-08-29 22:53:41 +01:00
Blair Thompson
ddd9d0cfd4
Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included.
2012-08-29 21:08:41 +01:00
Erik vd Zalm
0e58ef6805
Some dialogs are corrected
2012-08-29 21:15:59 +02:00
Erik vd Zalm
0e89022cc3
Correct temptable_55 name.
2012-08-28 19:47:22 +02:00
elgambitero
6cd150842f
Update Marlin/language.h
...
Some dialogs corrected and Default language set to 1
2012-08-22 21:46:22 +03:00
elgambitero
299c18596f
Update Marlin/language.h
...
Some dialogs are corrected
2012-08-22 21:44:57 +03:00
ErikZalm
b86336c3f5
Merge pull request #221 from daid/Marlin_v1
...
Long filename support for LCD display
2012-08-22 06:30:35 -07:00
daid
b69e75c89a
Added long filename support.
2012-08-22 14:49:57 +02:00
stohn
1d224cc031
merged with upstream and FIXED AGAIN bad translation commit
...
PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS
When you add new menu items / messages always copy them to ALL
languages (just use english)
2012-08-22 13:05:42 +02:00
stohn
06c03fe2f0
new method for message for making KILLED message visible
...
The cli(); at the start of the kill() function also stops the internal
arduino timer which stops updating of millis() which prevents the
display of the "KILLED." message.
The new function updates the display directly without checking any
timers.
2012-08-22 12:44:41 +02:00
daid
87ff61a8a6
Fix for #201
2012-08-22 10:54:55 +02:00
Blair Thompson
aacbebbebe
Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory.
2012-08-21 23:46:10 +01:00
stohn
31873ec707
changed int to long to overcome overflow of number display
...
- related bug reports: Issue #201 , Issue #213
2012-08-21 16:47:39 +02:00
stohn
de0448343f
added KILL_PIN support / cleaned up manage_inactivity function definition
2012-08-21 14:48:29 +02:00
stohn
69961dbba3
fixed incorrect menu messages from last commit...
...
- removed several multiple definitions of same message
- fixed definition of missing messages in german and spanish
- tweaked german translation (a lot)
- added note about changing and testing this file
2012-08-21 14:44:20 +02:00
Blair Thompson
6c050b8440
Fixes error introduced at commit aee475aa55 which caused the sketch not to comile for language option 1. Several defines were removed but still referenced in ultralcd.pde
2012-08-20 21:54:47 +01:00
Blair Thompson
b9f9f8f7d3
The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed.
2012-08-20 21:49:37 +01:00
elgambitero
d38b96fff1
Update Marlin/language.h
2012-08-12 22:45:11 +03:00
Erik vd Zalm
9f7f7354f5
Set default language 1
2012-08-12 21:29:42 +02:00
elgambitero
aee475aa55
Update Marlin/language.h
...
Spanish language included. It features the LCD screen messages and a small part of the Serial messages.
2012-08-12 21:26:17 +03:00
Erik vd Zalm
9083966c22
Do not use feedrate multiiply on Z and E only moves.
2012-08-12 18:13:34 +02:00
Erik vd Zalm
5406c533db
Disable FAST_PWM by default. On some systems it does not work ok.
2012-08-11 15:51:04 +02:00
Erik vd Zalm
f92dc91c3d
Enable M503 also when eeprom is disabled
2012-08-11 15:49:40 +02:00
James Adams
35a1dd081f
no message
2012-08-11 15:33:35 +02:00
James Adams
5131ab19ca
Fixed Retract in LCD Menu
2012-08-11 15:29:40 +02:00
James Adams
96f4f90cb3
Added pause and retract lcd menu items
2012-08-11 15:29:33 +02:00
James Adams
e10355500d
Updated Language.h with pause, resume, and retract
2012-08-11 15:29:26 +02:00
ErikZalm
a97c006bbf
Merge pull request #195 from kobaan/Marlin_v1
...
Updated german translations in language.h
2012-08-11 01:45:30 -07:00
ErikZalm
f062794a0d
Merge pull request #208 from Enchiridion/Marlin_v1
...
Added support for dual Z axis stepper drivers
2012-08-11 01:42:49 -07:00
ErikZalm
57468d3c21
Merge pull request #210 from Dabble63/Marlin_v1
...
Add Duty Cycling to the Heater Bed
2012-08-11 01:42:02 -07:00
Dabble63
6b45e9f167
Add Duty Cycling to the Heater Bed
2012-08-11 09:17:47 +03:00
Ian Jackson
adee81170d
M206: save values in eeprom
...
Really, we should have a way to adjust the XYZ homing of a machine in
the eeprom. So as the second stage of this, make the M206 home offset
parameters subject to the M500/M501/M502/M503 eeprom commands.
Bump the eeprom version to "V06".
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
2012-08-11 01:43:00 +01:00
