stohn 06c03fe2f0 new method for message for making KILLED message visible ... The cli(); at the start of the kill() function also stops the internal arduino timer which stops updating of millis() which prevents the display of the "KILLED." message. The new function updates the display directly without checking any timers.		2012-08-22 12:44:41 +02:00
..
Gen7	Fix cast warning in Gen7	2012-02-23 18:50:05 +01:00
hardware/tools/avr/etc	ATMega1284P support for Arduino IDE	2012-02-17 11:41:47 +01:00
Sanguino	Fixed compiler warning for Sanguino compile	2012-02-26 17:35:01 +01:00
cardreader.cpp	made prepare->autostart independent of current folder.	2012-03-19 20:24:40 +01:00
cardreader.h	__ header file replace	2012-06-02 20:44:17 +02:00
Configuration_adv.h	Added support for dual Z axis stepper drivers	2012-08-04 00:32:26 -06:00
Configuration.h	Disable FAST_PWM by default. On some systems it does not work ok.	2012-08-11 15:51:04 +02:00
COPYING	first commit	2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py	Added 20MHz support.	2012-03-11 12:25:04 +01:00
createTemperatureLookup.py	first commit	2011-08-12 22:28:35 +02:00
EEPROMwrite.h	Enable M503 also when eeprom is disabled	2012-08-11 15:49:40 +02:00
fastio.h	Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1	2012-02-13 13:07:55 +01:00
language.h	fixed incorrect menu messages from last commit...	2012-08-21 14:44:20 +02:00
Makefile	Makefile: Better display of size (device memory usage)	2012-08-10 19:36:30 +01:00
Marlin.h	added KILL_PIN support / cleaned up manage_inactivity function definition	2012-08-21 14:48:29 +02:00
Marlin.pde	new method for message for making KILLED message visible	2012-08-22 12:44:41 +02:00
MarlinSerial.cpp	Teensylu support.	2012-02-09 19:27:45 +01:00
MarlinSerial.h	Teensylu support.	2012-02-09 19:27:45 +01:00
motion_control.cpp	software_endstops: use *_MIN_POS and *_MAX_POS for arcs	2012-08-10 19:36:30 +01:00
motion_control.h	Removed interrupt nesting in the stepper ISR.	2011-11-27 21:12:55 +01:00
pins.h	Added support for dual Z axis stepper drivers	2012-08-04 00:32:26 -06:00
planner.cpp	added KILL_PIN support / cleaned up manage_inactivity function definition	2012-08-21 14:48:29 +02:00
planner.h	Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.	2012-05-09 08:05:13 +03:00
Sd2Card.cpp	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
Sd2Card.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
Sd2PinMap.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdBaseFile.cpp	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	2012-02-11 16:02:47 +01:00
SdBaseFile.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFatConfig.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFatStructs.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFatUtil.cpp	Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.	2012-02-11 16:02:47 +01:00
SdFatUtil.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFile.cpp	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdFile.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdInfo.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdVolume.cpp	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
SdVolume.h	made sd code only compile with SDSUPPORT defined. safes 10k of codespace	2011-12-26 09:28:51 +01:00
speed_lookuptable.h	Added 20MHz support.	2012-03-11 12:25:04 +01:00
stepper.cpp	added KILL_PIN support / cleaned up manage_inactivity function definition	2012-08-21 14:48:29 +02:00
stepper.h	merging	2011-12-12 20:35:46 +01:00
temperature.cpp	Add Duty Cycling to the Heater Bed	2012-08-11 09:17:47 +03:00
temperature.h	Added support for 2nd extruder temperature to UltraLCD	2012-04-27 14:51:32 +02:00
thermistortables.h	Merge pull request #170 from linagee/Marlin_v1	2012-06-02 03:46:56 -07:00
ultralcd.h	new method for message for making KILLED message visible	2012-08-22 12:44:41 +02:00
ultralcd.pde	new method for message for making KILLED message visible	2012-08-22 12:44:41 +02:00
watchdog.h	__ header file replace	2012-06-02 20:44:17 +02:00
watchdog.pde	simplified the includes, makefile now works with arduino23	2011-12-22 14:55:45 +01:00
wiring.h	add wiring.h, that can be used to overwrite:	2011-12-22 14:57:28 +01:00