3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-27 13:56:24 +00:00
Code Issues Releases Wiki Activity
16,036 Commits 21 Branches 81 Tags 1.9 GiB
e349a44c60
Commit Graph

1130 Commits

Author SHA1 Message Date
Scott Lahteine
f2ed18d150 M303 followup 
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
 2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off (#17284) 
M303 D will now toggle activation of PID_DEBUG output.   This allows the debug capability to be built into the firmware, but turned on and off as needed.
 2020-03-24 19:38:09 -05:00
Scott Lahteine
e7a9f17371 Tweak serial port descriptions 2020-03-21 23:38:44 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board (#17188) 2020-03-17 15:25:10 -05:00
Scott Lahteine
090a90a036 Add EEPROM_BOOT_SILENT option 2020-03-14 19:24:35 -05:00
Scott Lahteine
8b2d55e345 Config version 020005 2020-03-13 23:22:46 -05:00
Scott Lahteine
0578e9b16e Move SENSORLESS_PROBING to the probes section 
Fixes a bug with HAS_BED_PROBE not being set before use.
 2020-03-05 11:05:11 -06:00
Scott Lahteine
02cce7d4b4 Add TRAVEL_EXTRA_XYJERK option 
See #16949

Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
 2020-02-26 06:43:07 -06:00
Scott Lahteine
71539bcbeb Undo driver type auto-assignment for now 
Good general concept but needs more time to develop and group with a stepper suite.
 2020-02-11 02:32:01 -06:00
InsanityAutomation
cc1ff27256 Bump config version to 020004 (#16816) 2020-02-09 12:15:02 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 (#16790) 2020-02-08 21:01:57 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test (#16511) 2020-02-05 20:33:39 -06:00
Scott Lahteine
bfad23d3e2 (c) 2020 2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side (#16759) 2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 (#16755) 2020-02-02 00:02:30 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic (#16731) 2020-01-30 18:00:37 -06:00
Bob Kuhn
0d166f9c7d Duet Smart Effector support (#16641) 2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0 Bring configs and drivers.h up to date 2020-01-24 23:17:52 -06:00
InsanityAutomation
79810b7fcb G12 defaults per tool. Event G-code for post-toolchange (#16554) 2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2 Add HMS434 V15 ATSAM board (#16620) 2020-01-21 01:10:31 -06:00
InsanityAutomation
0fcf2b1110 Quad Z stepper support (#16277) 2020-01-19 23:35:07 -06:00
tompe-proj
a338dce83f PINDA v2 temperature sensor / compensation (#16293) 2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f Update FYSETC S6 pins (#16559) 2020-01-17 13:16:05 -06:00
Scott Lahteine
ea7363a8f4 Update more configs 2020-01-14 18:48:29 -06:00
Bob Kuhn
1ad53cee1f Improved STMicro L64XX stepper driver support (#16452) 2020-01-13 18:47:30 -06:00
George Fu
e593da1c23 Update and fix DGUS (#16317) 2020-01-03 21:00:44 -06:00
greppp
7f87a044cd Fix Ender-2 display pins, add BTN_ENC (#16349) 2020-01-03 20:44:16 -06:00
Scott Lahteine
00c83e9ca6 Update comments re: NOZZLE_AS_PROBE 2020-01-01 19:41:23 -06:00
InsanityAutomation
1c9ccce520 Add NOZZLE_AS_PROBE (no probe offsets) (#15929) 2019-12-24 00:03:08 -06:00
Scott Lahteine
af4c62b422 Update product links 2019-12-15 20:58:31 -06:00
Luu Lac
f3155af444 Update AZSMZ LCD link (#16106) 2019-12-06 01:35:06 -06:00
Felicia Hummel
690ed531b6 Configurable PSU power-on delay (#16050) 2019-11-30 07:17:24 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
Scott Lahteine
7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
InsanityAutomation
0074d63962 Vendor version override (#14189) 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2019-10-15 12:32:44 -05:00
Matthew Piercey
ac8083588b Add config for Wanhao Duplicator i3 v2.1 2019-10-11 00:59:58 -05:00
Roxy-3D
2cf35267c4 Set Junction Deviation value from Jerk and Default Acceleration (#15509) 
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
 2019-10-10 19:44:15 -05:00
Scott Lahteine
b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine
89490171ef Use "concatenatable" language codes 2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Tanguy Pruvot
d277e93f4d Configurable TOUCH_BUTTONS repeat delays (#15245) 2019-09-16 21:32:55 -05:00
Scott Lahteine
3648bce886 Tweak NOZZLE_CLEAN_START_POINT spacing 2019-09-11 01:50:24 -05:00
Scott Lahteine
cff502c6d4 Tweak REPRAPWORLD_KEYPAD config comment 2019-09-04 17:23:38 -05:00
Scott Lahteine
87b16ed5f6 Bring Configuration.h up to date 2019-08-31 07:03:51 -05:00
Robby Candra
38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen (#15057) 2019-08-28 07:40:18 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese (#13892) 2019-08-24 03:40:28 -05:00
MaukCC
8664b8e97b Adding HMS434 machine (#14931) 2019-08-20 03:40:48 -05:00
Scott Lahteine
bc93ac53b5 Fix #define typo in configs 2019-08-18 19:51:55 -05:00
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Tim Moore
e3660bca25 Overlord printer thermistor (#14815) 2019-08-03 20:57:56 -05:00
Scott Lahteine
e85eca2630 HAL cleanup, Teensy 3.1 platform 2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 2019-08-02 06:19:45 -05:00
Robby Candra
128eed6b57 Option to reverse select direction/buttons (#14693) 2019-07-30 17:42:57 -05:00
Scott Lahteine
bc58e678bd More general FSMC display option 2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f More general TOUCH_BUTTONS comment 2019-07-30 04:22:27 -05:00
mikeshub
1579091c20 PID loop improvements (#14746) 
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
 2019-07-28 15:50:25 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f Improve magnetic dock switching toolhead (#14663) 2019-07-19 06:07:26 -05:00
Tanguy Pruvot
81d629bc47 Robin & Longer3D SPI TFT driver (#14595) 2019-07-14 18:16:26 -05:00
InsanityAutomation
d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Scott Lahteine
3218c4b33f Shorten some config descriptions 2019-07-11 05:45:27 -05:00
Scott Lahteine
84d0bc5c17 OLED LCD section 2019-07-08 23:58:04 -05:00
Vanessa Dannenberg
4fa8053638 RPW-Ultra thermistor table (#14517) 2019-07-05 20:37:05 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Aliaksei Kvitsinski
2f932a11b3 Park heads with electromagnet (#14023) 2019-07-01 05:55:23 -05:00
thisiskeithb
4b9f6d531b Add links to Junction Deviation heading (#14272) 2019-07-01 01:17:53 -05:00
Tanguy Pruvot
24655a6bf3 Touch-MI Menu and Manual Deploy option (#14290) 2019-06-30 23:55:27 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Tim Moore
8ce84fa44f Add temperature-based auto power options (#14397) 2019-06-27 16:28:07 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine
aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101) 
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
 2019-06-14 22:19:48 -05:00
InsanityAutomation
b7eeb5b13b Move BLTouch options to adv config (#14131) 
Plus other BLTouch and menu enhancements.
 2019-06-10 17:46:42 -05:00
InsanityAutomation
f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Bob Kuhn
1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Andrei Pozolotin
31ff7da7ac Add missing CHAMBER options (for M141) (#13371) 2019-03-11 16:50:07 -05:00
Scott Lahteine
98b55421a5 Clean up some temp config 2019-03-11 16:31:23 -05:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
InsanityAutomation
e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Scott Lahteine
f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Marcio Teixeira
5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Marcio Teixeira
f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
Ludy
cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
InsanityAutomation
367a9f65aa Add Formbot 350c Thermistor (#12661) 2018-12-20 17:04:17 -06:00
Ludy
a7b3a61424 Improve some config comments readability (#12615) 2018-12-09 19:02:42 -06:00
Scott Lahteine
4388015f1a Tweak config formatting 2018-12-07 16:57:14 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
KangDroid
82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine
9cd3529108 Organize language data, fix Korean and Danish 2018-10-30 20:41:16 -05:00
Scott Lahteine
9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Chris Rigter
3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
Scott Lahteine
e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) (#12132) 
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
 2018-10-18 11:34:52 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069) 
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
 2018-10-16 07:28:52 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984) 
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
 2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00