3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-28 14:24:34 +00:00
Code Issues Releases Wiki Activity
9,311 Commits 21 Branches 81 Tags 1.9 GiB
f508bdded4
Commit Graph

928 Commits

Author SHA1 Message Date
Scott Lahteine
233f824dd6 Define GRID_MAX_POINTS 2017-05-12 01:32:34 -05:00
Pablo Ventura
539e0c2f31 "M80 S" to report the state of the PSU pin 2017-05-10 17:58:58 -05:00
Tannoo
66db6c3acc UBL Menu System 1.1 
/**
     * UBL System submenu
     *
     *  Prepare
     * - Unified Bed Leveling
     *   - Activate UBL
     *   - Deactivate UBL
     *   - Mesh Storage
     *       Memory Slot:
     *       Load Bed Mesh
     *       Save Bed Mesh
     *   - Output Map
     *       Map Type:
     *       Output Bed Mesh Host / Output Bed Mesh CSV
     *   - UBL Tools
     *     - Build Mesh
     *         Build PLA Mesh
     *         Build ABS Mesh
     *       - Build Custom Mesh
     *           Hotend Temp:
     *           Bed Temp:
     *           Build Custom Mesh
     *         Info Screen
     *       - Build Cold Mesh
     *       - Fill-in Mesh
     *           Fill-in Mesh
     *           Smart Fill-in
     *           Manual Fill-in
     *           Info Screen
     *         Continue Bed Mesh
     *         Invalidate All
     *         Invalidate Closest
     *     - Validate Mesh
     *         PLA Mesh Validation
     *         ABS Mesh Validation
     *       - Custom Mesh Validation
     *           Hotend Temp:
     *           Bed Temp:
     *           Validate Mesh
     *         Info Screen
     *     - Edit Mesh
     *         Fine Tune All
     *         Fine Tune Closest
     *       - Adjust Mesh Height
     *           Height Amount:
     *           Adjust Mesh Height
     *         Info Screen
     *     - Mesh Leveling
     *         3-Point Mesh Leveling
     *       - Grid Mesh Leveling
     *           Side points:
     *           Level Mesh
     *         Info Screen
     *   - Output UBL Info
     */
 2017-05-10 12:14:43 -05:00
Scott Lahteine
081bf1f879 Patch #else / #endif comments 2017-05-09 12:37:23 -05:00
Thomas Moore
3279337f47 Move BLTouch LCD menu from Main to Main/Control 2017-05-08 15:21:01 +00:00
Thomas Moore
acec237092 Shutdown heaters and fan after canceling a print from the SD card 2017-05-03 20:43:09 -05:00
Scott Lahteine
2658cc707a Treat temperature as integer, when possible 2017-05-03 17:27:25 -05:00
Thomas Moore
b39f634252 Continuously update LCD when hotend status is displayed in Filament Change screens 2017-05-02 21:49:40 -05:00
Scott Lahteine
e79b335367 Patches for leveling reactivation in G28 / M48 2017-05-01 17:38:57 -05:00
Brian
4e1448e75a Various fixes for compiler warnings 
add BLTouch-related messages in english and (rusty) french;
add missing endstops.h in ultralcd.cpp;
fix misc. compiler warnings;
fix lsf_reset - ZERO macro can't handle a pointer as it would only memset the size of the pointer, not the size of the entire struct
 2017-05-01 02:12:40 -05:00
Scott Lahteine
671a44b8aa Merge pull request #6410 from teemuatlut/LVD-Delta 
Delta auto-calibration updates
 2017-04-30 16:39:51 -05:00
LVD-AC
585c00a728 Proposed changes 
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
 2017-04-29 18:53:14 +03:00
Scott Lahteine
29fa241617 Initial patches to G33 2017-04-29 15:29:49 +03:00
Scott Lahteine
2cc9774f34 Apply bltouch_menu 
As proffered in #6252
 2017-04-28 18:43:03 -05:00
LVD-AC
7a6a1ef583 M666 normalize positive values to <=0 
M666

+ tower radians absolute value
 2017-04-28 18:05:24 +03:00
LVD-AC
d8102aeca8 Cn negative : no tower angle calibration 
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)

EEPROM version updated
 2017-04-27 21:13:07 +03:00
Scott Lahteine
adb8e68592 Fix stuck "Print Aborted" LCD message 
Fixes #6393
 2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Scott Lahteine
ccda63c473 Drop the accessor form for LCD value editing 2017-04-22 16:19:30 -05:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's) 
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
 2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8 Clean up trailing whitespace 2017-04-20 17:52:07 -05:00
Scott Lahteine
1286d9603d Clean up and organize ultralcd.cpp 2017-04-17 16:39:36 -05:00
Scott Lahteine
3cdf78a79f MSG_VOLUMETRIC => MSG_FILAMENT 2017-04-17 16:39:36 -05:00
Thomas Moore
f8e77d6545 Add Linear Advance values to EEPROM and enable configuration of K via LCD 2017-04-17 16:39:36 -05:00
Scott Lahteine
a81606c680 Show Cancel/Continue screen for ABL "Level Bed" 2017-04-15 16:51:03 -05:00
Scott Lahteine
4e04383d18 Merge pull request #6354 from thinkyhead/rc_doubleclick_fix 
Fix undefined symbol if DOUBLECLICK_FOR_Z_BABYSTEPPING and HAS_BED_PROBE defined
 2017-04-15 16:06:29 -05:00
Thomas Moore
8dd0492e68 Show lcd_babystep_zoffset screen if DOUBLECLICK_FOR_Z_BABYSTEPPING is enabled and HAS_BED_PROBE is defined 2017-04-15 14:44:50 -05:00
Bob-the-Kuhn
60471b7592 minor improvements 
Configuration_store.cpp - changed a couple of print statements so the
values were printed.  The old method resulted in the formula being
printed.

ubl_G29
1) added support for R option to P4.  Now probes all points unless R is
present and the number is greater than 0.

2) P2 - moved map print statement so it showed the point that was
currently being probed,  The old location did this only for the first
point.

3) P4 - Moved the map print for the same reason.

ultralcd.cpp - changed "Mesh Editor :" to "Mesh Editor" because the LCD
draw routine puts a ":" in automatically so you end up with an extra ":"
using the old message.
 2017-04-15 09:31:55 -05:00
Scott Lahteine
a2356c2825 Fix compiler warning about z-offset callback 2017-04-15 02:50:27 -05:00
Scott Lahteine
cf6f483378 Merge pull request #6187 from thinkyhead/rc_flsun_delta_autocal 
Delta: DELTA_HEIGHT, G33 Auto-Calibrate, drop M206/M428, add M665 H
 2017-04-14 22:32:12 -05:00
Scott Lahteine
24882adfbf Allow NO_WORKSPACE_OFFSETS with DELTA_AUTO_CALIBRATION 
- On `DELTA` the `M665 H` option supplants `M206`
- On `DELTA` `NO_WORKSPACE_OFFSETS` only reverts `G92` behavior
- Spawn 4 conditionals based on `NO_WORKSPACE_OFFSETS`
- Optimize coordinate space conversion for `DELTA` workspace
- To keep EEPROM version, retain `home_offset[XYZ]`, just ignore XY
 2017-04-14 21:56:49 -05:00
LVD-AC
8821963873 Implement delta auto-calibration and delta_height 2017-04-14 19:46:31 -05:00
benlye
1f9ee42750 Fix lcd_babystep_zoffset() 
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
 2017-04-14 18:38:35 +01:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
60ac41a32c Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Thomas Moore
361655828f Use babystepping to adjust bed probe z-offset 2017-04-13 15:46:05 -05:00
Kai
001bc14255 Allow 10mm Movements for Z-Axis 
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
 2017-04-11 18:39:26 +02:00
Scott Lahteine
48c16fc6ef Merge pull request #6307 from thinkyhead/rc_less_no_reentrance 
Only lcd_synchronize needs no_reentry
 2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6 Only lcd_synchronize needs no_reentry 2017-04-10 20:13:23 -05:00
Scott Lahteine
67fb7f82ac Merge pull request #6283 from thinkyhead/rc_eeprom_z_fade 
Save / restore z_fade_height in EEPROM
 2017-04-10 20:05:20 -05:00
Kai
3b82db5fe9 Missing semicolon in ultralcd.cpp 
When PARK_HEAD_ON_PAUSE is defined Marlin won't compile because of two missing semicolon.
 2017-04-10 14:45:51 -05:00
Scott Lahteine
786af73e24 Convert config code to a static class 2017-04-09 22:06:41 -05:00
Scott Lahteine
7a704af5e6 Merge pull request #6284 from thinkyhead/rc_wt150_rebase 
wt150 (Mightyboard Rev E) & RRD Full Graphic Smart Controller
 2017-04-09 20:27:44 -05:00
Scott Lahteine
314a02e2d5 Toggle with XOR 2017-04-09 07:58:47 -05:00
Paweł Stawicki
9b0885f4f6 Allow boards without a thermistor 2017-04-09 06:45:41 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
f8408036f2 Merge pull request #6264 from thinkyhead/rc_five_extruders 
Support up to 5 extruders in Marlin
 2017-04-07 12:48:56 -05:00
Scott Lahteine
832064e4f2 Implementation changes to support 5 extruders 2017-04-07 10:46:37 -05:00
Scott Lahteine
dc84678fc1 Fix HOTEND_STATUS_ITEM for graphical display 2017-04-06 23:07:30 -05:00
Bob-the-Kuhn
6643d553f6 # This is a combination of 2 commits. 
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
 2017-04-06 16:16:27 -05:00
Scott Lahteine
f5c5c1f771 Rename all UBL files with a ubl_ prefix 2017-04-06 05:33:27 -05:00
Scott Lahteine
eb1e6aa29b Use same config name for all mesh dimensions 2017-04-06 00:42:52 -05:00
Scott Lahteine
3412950abc Merge pull request #6209 from thinkyhead/rc_psu_zero 
Power Supply 0 as "General"
 2017-04-02 16:44:42 -05:00
Scott Lahteine
699310d1d2 Fix: Thermal runaway if nonexistent bed's temp is set 2017-04-02 11:48:10 -05:00
Scott Lahteine
5bce731962 Fix LCD preheat menus 2017-04-02 09:32:22 -05:00
Tannoo
54173c80ad Power Supply 0 as "General" 2017-04-02 06:21:34 -05:00
Scott Lahteine
7a7a80e6c5 status_printf => lcd_status_printf_P 2017-04-02 01:05:25 -05:00
Scott Lahteine
0e6ec34228 Use PSTR versions of lcd_status... to save SRAM 2017-04-02 00:45:39 -05:00
Scott Lahteine
73e193da1d Implement LCD_BED_LEVELING for PROBE_MANUALLY 2017-03-31 11:50:18 -05:00
Scott Lahteine
fcadc7bb1a Implement the "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
a5e085cbea Have run_probe() return probe Z, not nozzle Z 2017-03-31 09:27:49 -05:00
Scott Lahteine
9e4bd6b3b5 Further repairs to UBL, comments, spacing 2017-03-31 02:20:20 -05:00
Scott Lahteine
c9eb1d6ab7 Make MBL a static class, use lookup for index-to-point conversion 2017-03-31 01:28:07 -05:00
Scott Lahteine
de9d2cddc3 Merge pull request #6152 from thinkyhead/rc_cleanup_6150_etc 
UBL cleanup, optimization
 2017-03-30 17:40:29 -05:00
Scott Lahteine
9217e4b8ec Various UBL cleanups and bug fixes 2017-03-30 17:09:49 -05:00
Remo Kallio
d38b1bc4b1 Show filament width sensor values in LCD constantly if SD card support is not enabled. 2017-03-29 04:03:08 -05:00
Roxy-3D
d8724bb546 Get G29's P1 (Automated Probing) working again. 
Incorrect optimizations of data types and ternary operators caused some
issues.
 2017-03-28 17:11:02 -05:00
Scott Lahteine
d076c1b604 Apply some general cleanup to code 2017-03-24 01:37:51 -05:00
Scott Lahteine
e244399766 Additional cleanup of UBL code 2017-03-22 20:51:10 -05:00
Scott Lahteine
b904b5ae8d Audible feedback for settings store/load/reset 2017-03-22 02:15:21 -05:00
Roxy-3D
72f7b14e66 Make G29's Interactive Mesh Editor Work 2017-03-20 12:52:51 -05:00
Roxy-3D
3fd74b121f Get G29's Interactive Mesh Editor running 
G29 P4 R O  should work now.
 2017-03-20 12:52:51 -05:00
Scott Lahteine
ff0dd162b7 PARK_HEAD_ON_PAUSE implementation 2017-03-19 07:27:35 -05:00
Scott Lahteine
9b2b53f63a Merge pull request #6042 from thinkyhead/rc_fix_toolchange_z 
Move Z last in tool-change for SWITCHING_EXTRUDER
 2017-03-19 00:34:41 -05:00
Scott Lahteine
77cf648ed3 Move menu selection past static items in 1 screen 2017-03-18 12:26:21 -05:00
Scott Lahteine
fb60aa3736 UBL implementation 2017-03-18 11:35:20 -05:00
Scott Lahteine
11f1fdfab4 _lcd_level_bed_position => manual_probe_index 2017-03-17 06:05:17 -05:00
Scott Lahteine
0e410c9dfd Software endstop options as simple switches 2017-03-17 06:05:17 -05:00
Scott Lahteine
d01b915085 Implement soft_endstops_enabled for clamping 2017-03-17 06:05:17 -05:00
Scott Lahteine
3e927ff204 Replace MBL Z hacking 2017-03-17 06:05:17 -05:00
Scott Lahteine
f02af83d42 Remove some extraneous spaces 2017-03-16 23:59:11 -05:00
Scott Lahteine
2defb1d748 Use SET_INPUT_PULLUP where appropriate 2017-03-07 23:43:33 -06:00
Scott Lahteine
3830778852 Apply NO_WORKSPACE_OFFSETS to lcd menu 2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d Fix preheat menu formatting 2017-03-06 02:07:07 -06:00
Scott Lahteine
6c5312559c Menu item to preheat only the hotend 2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae Move Change Filament above Cooldown 2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e Move Cooldown above Preheat 2017-03-06 01:13:12 -06:00
Scott Lahteine
34253497d4 Babysteps code tweak 
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
 2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1 Clean up and finish #5887 2017-03-02 20:16:29 -06:00
Roxy-3D
11e892bd84 Merge pull request #5887 from Roxy-3D/RCBugFix 
Double Click of Encoder Wheel Jumps to Z-BabyStepping
 2017-03-01 17:15:02 -07:00
Scott Lahteine
34cba42104 Use PSTR for MSG_HEATING 2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02 fixup the indentation 2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9 Fix scoping issues for double click to Z-Babystepping 2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09 Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:08:19 -07:00
dot-bob
cd68380ce6 Add status_printf to print messages to the lcd status line. 
Also add a hotend indicator to the heating message displayed on the lcd status line.
 2017-02-20 15:26:54 -06:00
Scott Lahteine
6e0b3fcc08 Optimize M600 heater status LCD items 2017-02-18 04:08:00 -06:00
Scott Lahteine
d9dcef8a87 Spacing, coding standards 2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9 Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c Fix for broken MBL 
LCD call was waiting forever, causing the system to hang.
 2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb Parenthesize some menu defines for safety 2017-02-14 23:12:27 -06:00
Scott Lahteine
a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Scott Lahteine
e44294bb4d Make HOTEND_LOOP more consistent, let compiler optimize it 2017-02-12 02:50:38 -06:00
Scott Lahteine
1bc5be3bdf Cast DELTA_PRINTABLE_RADIUS to float in sq() 
Addressing #5625
 2017-02-11 23:28:39 -06:00
Scott Lahteine
fb3c30e24c Fix lcd_wait_for_homing causing menu to block 
As a showcase function for how to do waiting in the lcd menu, this function should be preserved.
 2017-01-12 04:37:23 -08:00
Scott Lahteine
f8ae0fd29f Merge pull request #5647 from manianac/RCBugFix-PrepareMenuFix 
Fix empty Prepare menu
 2017-01-12 04:20:18 -08:00
Robert Kirk
aab5118c6a Remove error causing break command 
Use index macro instead of e
 2017-01-01 17:47:01 -05:00
Robert Kirk
306c184b1a Allow M600 when dryrun debugging 2016-12-21 20:30:51 -05:00
AnHardt
61f15ef7e7 Fix 5194 
I have been a bit too radical in cleaning up this section.
 2016-12-21 00:45:29 +01:00
Scott Lahteine
1a26ce1cdc Merge pull request #5550 from FHeilmann/patch-2 
Allow negative retract values in the LCD
 2016-12-20 02:10:22 -08:00
Scott Lahteine
1cba425308 Allow negative recover-swap length from LCD 2016-12-20 01:16:08 -08:00
Scott Lahteine
644f45cbd8 Merge pull request #5563 from akaJes/m600 
FILAMENT_CHANGE_FEATURE allowed in idle mode
 2016-12-20 01:06:10 -08:00
Scott Lahteine
0d2fc13516 Place "Level Bed" closer to "Auto Home" 2016-12-20 00:51:03 -08:00
Scott Lahteine
b031d28ebf Encoder events should not skip stripes 2016-12-20 00:21:51 -08:00
Scott Lahteine
22881f38b9 Fix updating of "bool" menu items 2016-12-20 00:21:51 -08:00
Scott Lahteine
eb68715b94 No "Cooldown" menu if heaters are off 2016-12-20 00:21:51 -08:00
Jesus
4ed976b5ff m600 fixes 2016-12-20 09:47:46 +02:00
Scott Lahteine
18ba31e9b5 Add Debug Menu with LCD_PROGRESS_BAR_TEST as an example 2016-12-19 22:57:14 -08:00
Florian Heilmann
a7334fd2a0 Allow negative retract values in the LCD 
This can already be done via G-Code, so adding the capability to the LCD should be straight forward.
 2016-12-19 14:19:06 +01:00
AnHardt
292eb365c6 Optimize handling of block_buffer_runtime() 
millis_t is long - divisions take for ever.

Return a kind of millisecond instead of microsecond -
divided by 1024 instead of 1000 for speed. (2.4% error)

That does not matter because block_buffer_runtime is
already a too short estimation.
Shrink the return-type.
 2016-12-19 11:47:28 +01:00
Scott Lahteine
67ca6c7bfe Codestyle tweaks to ultralcd.cpp 2016-12-14 04:20:33 -08:00
AnHardt
d0e24e0876 Adaptive screen updates for all kinds of displays 
The target here is to update the screens of graphical and char base
displays as fast as possible, without draining the planner buffer too much.

For that measure the time it takes to draw and transfer one
(partial) screen to the display. Build a max. value from that.
Because ther can be large differences, depending on how much the display
updates are interrupted, the max value is decreased by one ms/s. This way
it can shrink again.
On the other side we keep track on how much time it takes to empty the
planner buffer.
Now we draw the next (partial) display update only then, when we do not
drain the planner buffer to much. We draw only when the time in the
buffer is two times larger than a update takes, or the buffer is empty anyway.

When we have begun to draw a screen we do not wait until the next 100ms
time slot comes. We draw the next partial screen as fast as possible, but
give the system a chance to refill the buffers a bit.

When we see, during drawing a screen, the screen contend has changed,
we stop the current draw and begin to draw the new content from the top.
 2016-12-13 18:44:34 +01:00
Scott Lahteine
0772c8e55f Merge pull request #5487 from thinkyhead/rc_easier_move_axis 
Rearrange Move Menu, Fix up Delta Calibration
 2016-12-13 07:07:05 -08:00
Scott Lahteine
93b2833347 Move Menu: Select axis first, resolution after 2016-12-13 03:11:14 -08:00
Scott Lahteine
641e0936d4 Patch up Delta Calibration Menu 2016-12-13 02:42:28 -08:00
Scott Lahteine
b4dbf4d18a Non-reentrant "Moving..." screen to safely wait in LCD 2016-12-13 02:42:27 -08:00
Scott Lahteine
2b5d424394 Use handle_reprapworld_keypad for keypad handling 2016-12-13 01:41:08 -08:00
AnHardt
cd2b74e88d Replace ftostr62sign with ftostr62rj 
`ftostr62sign()` is used only when displaing/editing
Steps/mm. A sign is not needed - the value is always positive.
Because the number part is long there is no't much place for the values name.
With this PR the is one more char for the name possible.
 2016-12-12 20:25:20 +01:00
esenapaj
a298a58684 Remove redundant "E" 2016-12-09 02:27:34 +09:00
Scott Lahteine
3fb43c11fc Fix compile error with LCD_I2C_VIKI 2016-12-07 23:29:45 -06:00
Scott Lahteine
01e5d46ea7 Patch some planner compile errors 2016-12-07 02:26:24 -06:00
AnHardt
a6fbd4a5d8 Distribute GLCD screen updates in time 
Currently we draw and send the screens for a graphical LCD all at once.
We draw in two or four parts but draw them directly behind each other.
For the tested status screen this takes 59-62ms in a single block.
During this time nothing else (except the interrupts) can be done.
When printing a sequence of very short moves the buffer drains - sometimes until it's empty.

This PR splits the screen update into parts.
Currently we have 10 time slots. During the first one the complete screen is drawn. (60,0,0,0,0,0,0,0,0,0,0)
Here i introduce pauses for doing other things. (30,30,0,0,0,0,0,0) or (15,15,15,15,0,0,0,0,0,0)
Drawing in consecutive time slots prevents from lagging too much. Even with a 4 stripe display all the drawing is done after 400ms.
Previous experiments with a even better distribution of the time slots like
(30,0,0,0,0,30,0,0,0,0) and (15,0,15,0,15,0,15,0,0,0) did not feel good when using the menu, because of too much lag.

Because of the previous PRs to speed up the display updates and especially reducing the difference between drawing 2 or 4 stripes,
it now makes sense for the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER to go from 2 to 4 stripes. This costs about 1-2ms per complete
screen update, but is payed back by having partial updates lasting only the half time and two additional brakes. Also ~256 byte of
framebuffer are saved in RAM.

13:45:59.213 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:00.213 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:01.215 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59
13:46:02.215 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:03.214 : echo: #:17 >:13 s:30;   #:17 >:13 s:30;   S#:34 S>:26 S:60
13:46:04.214 : echo: #:16 >:13 s:29;   #:16 >:14 s:30;   S#:32 S>:27 S:59
13:46:05.212 : echo: #:16 >:14 s:30;   #:17 >:13 s:30;   S#:33 S>:27 S:60
13:46:06.212 : echo: #:17 >:13 s:30;   #:16 >:13 s:29;   S#:33 S>:26 S:59

03:30:36.779 : echo: #:8 >:7 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:34 S>:27 S:61
03:30:37.778 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:9 >:7 s:16;   #:8 >:6 s:14;   S#:35 S>:26 S:61
03:30:38.778 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:7 s:15;   S#:35 S>:26 S:61
03:30:39.777 : echo: #:8 >:6 s:14;   #:10 >:7 s:17;   #:8 >:8 s:16;   #:8 >:6 s:14;   S#:34 S>:27 S:61
03:30:40.780 : echo: #:8 >:6 s:14;   #:11 >:7 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:35 S>:25 S:60
03:30:41.780 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:6 s:14;   #:9 >:6 s:15;   S#:36 S>:25 S:61
03:30:42.779 : echo: #:8 >:6 s:14;   #:10 >:8 s:18;   #:8 >:6 s:14;   #:8 >:6 s:14;   S#:34 S>:26 S:60
03:30:43.778 : echo: #:9 >:6 s:15;   #:10 >:7 s:17;   #:8 >:7 s:15;   #:9 >:6 s:15;   S#:36 S>:26 S:62

#: draw a stripe
>: transfer a stripe
s: sum of of draw and transfer for one stripe
S#: sum of draws for a complete screen
S>: sum of transfers for a complete screen
S: time to draw and transfer a complete screen
 2016-12-05 12:22:54 -06:00
Scott Lahteine
4bafdf4b66 Support DISTINCT_E_FACTORS in LCD Motion Menu 2016-12-05 07:26:18 -06:00
Scott Lahteine
0b53d78046 Tweak editable items for debugging 2016-12-04 03:51:10 -06:00
Scott Lahteine
b0361ebe4f Merge pull request #5343 from thinkyhead/rc_invert_case_light 
Allow case light pin to be active low
 2016-12-02 01:17:11 -06:00
Scott Lahteine
f60b4f8659 Allow case light pin to be active low 2016-12-01 23:32:34 -06:00
Scott Lahteine
d07229f185 Fix redraw in SD Card menus 2016-12-01 18:15:58 -06:00
Scott Lahteine
a69b1ee691 Merge pull request #5313 from thinkyhead/rc_fix_menu_actions 
Keep drawing menu unless screen changes
 2016-11-28 02:01:39 -06:00
Scott Lahteine
32ee3acf86 Merge pull request #5315 from thinkyhead/rc_fixup_material_menus 
Refine material heatup menu items
 2016-11-28 01:46:51 -06:00
Scott Lahteine
c70a06daf1 lcd_save_previous_menu => lcd_save_previous_screen 2016-11-28 01:46:18 -06:00
Scott Lahteine
13ea43cc8d Only exit menu handler when the screen changes 2016-11-28 01:46:18 -06:00
Scott Lahteine
f45b6a7762 Merge pull request #5314 from thinkyhead/case_light_menu_fix 
Fix and optimize case-light code
 2016-11-28 01:45:27 -06:00
Scott Lahteine
0951d385ce Don't set heater temperature above its maximum 2016-11-28 01:37:24 -06:00
Scott Lahteine
c9193e856d Limit preheat parameters based on all nozzles 2016-11-28 01:37:24 -06:00
Scott Lahteine
bb4529f7d2 PLA / ABS => Material 1 / 2 2016-11-28 01:37:24 -06:00
Scott Lahteine
61437d988a Fix and optimize case-light code 2016-11-28 01:34:52 -06:00
AnHardt
7a9fa78822 MENU_HOLLOW_FRAME for the menu screens 
MENU_HOLLOW_FRAME for the menu screens and
some pixel shifting to optimize the look with tall fonts. (cn)
 2016-11-27 22:59:05 +01:00
Scott Lahteine
71842b6a17 Apply const to LCD arguments and locals 2016-11-26 06:53:52 -06:00
Scott Lahteine
2a9b3376a9 Merge pull request #5289 from thinkyhead/rc_which_menu_actions 
Drop "static" keyword in ultralcd.cpp function declarations
 2016-11-23 23:04:05 -06:00
Scott Lahteine
b97dafe4b8 Drop "static" keyword in ultralcd.cpp function declarations 2016-11-23 20:43:01 -06:00
Scott Lahteine
d891324830 Merge pull request #5258 from mosh1/mbl_speed_fix 
Fix z feedrate value when doing mesh bed leveling. probe feedrate use…
 2016-11-23 14:15:01 -06:00
Scott Lahteine
7f8133a51f Merge pull request #5255 from Kaibob2/CaseLightMenu 
Case light menu (3rd attempt)
 2016-11-23 13:46:33 -06:00
Kai
0c341f0c50 Added Menu entry for Case light 2016-11-23 19:29:15 +01:00
esenapaj
7b836a4000 Introduce a +1234.56 format for over 999 steps/mm 2016-11-21 17:45:07 +09:00
Moshen Chan
29b174bfb9 Fix z feedrate value when doing mesh bed leveling. probe feedrate uses XY_PROBE_SPEED 2016-11-19 16:34:41 -08:00
Scott Lahteine
2cc32d85a3 Adjust ENSURE_SMOOTH_MOVES coding style 2016-11-19 01:28:48 -06:00
Sebastianv650
de89dc9f04 Ensure smooth print moves even with LCD enabled 
lcd_update can take so much time that the block buffer gets drained if
there are only short segments. This leads to jerky printer movements for
example in circles and a bad print quality.

This change implements a simple check: Only if the block currently
executed is long enough, run lcd_update.
This also means the printer will not show actual values on the LCD nor
will it respond to buttons pressed. A option that keeps the menu
accessible is also available.
Aditionaly, slow down if a block would be so fast that adding a new
block to the buffer would take more time. In this case, the buffer would
drain until it's empty in worst case.
 2016-11-19 01:28:47 -06:00
Kai
8e8b4398f3 Printer Stats / Completed prints line doesn't fit in display (when german) 2016-11-09 22:03:25 +01:00
Scott Lahteine
7780052fb3 Give instant feedback for filament change 2016-11-07 03:48:16 -06:00
Scott Lahteine
00662b8635 Minor babystep cleanup patches 2016-11-03 23:31:45 -05:00
Scott Lahteine
cad792e702 Reduce code for invariant lcd_detected 2016-11-03 23:31:45 -05:00
esenapaj
c8c1a28f6f Follow-up the PR #5089 (Centralize click-handling in the LCD loop) 
bool feedback is no longer used
 2016-11-02 08:36:02 +09:00
Scott Lahteine
1a2310c494 Make LCD preheat vars an array to reduce code size 2016-10-28 20:57:36 -05:00
Scott Lahteine
50ee749082 Centralize click-handling in the LCD loop 2016-10-28 20:57:21 -05:00
Scott Lahteine
9cbedab91b Use DPM where possible 2016-10-26 18:38:32 -05:00
Scott Lahteine
4b056d8184 Fix warning in ultralcd.cpp 2016-10-26 17:51:26 -05:00
Scott Lahteine
8b967a9ff0 Merge pull request #5058 from thinkyhead/rc_reverse_arrow_buttons 
Apply encoder reverse options to keypad arrows
 2016-10-22 13:52:35 -05:00
Scott Lahteine
e151f952a3 Apply encoder reverse options to keypad arrows 2016-10-22 11:51:33 -05:00
Josef Pavlik
0bd66807b2 fixed warning: extra ; 2016-10-22 11:12:29 -05:00
Josef Pavlik
d35dc407a8 fixed warning: ISO C99 requires rest arguments to be used 2016-10-22 11:12:29 -05:00
Josef Pavlik
c2b51af3ba fixed warning: ISO C does not permit named variadic macros 2016-10-22 11:12:29 -05:00
Scott Lahteine
0d3fc7dd89 Merge pull request #5059 from gcormier/fixbaby 
Set defer delay back to false when exiting babystepping.
 2016-10-22 10:59:17 -05:00
Greg Cormier
0009725637 Set defer delay back to false when exiting babystepping. 2016-10-22 09:43:30 -04:00
Scott Lahteine
0908329d96 Merge pull request #5057 from thinkyhead/rc_mbl_lcd_logical 
Fix manual leveling coordinates
 2016-10-22 06:31:02 -05:00
Scott Lahteine
1165e83263 MBL coordinates are logical 2016-10-22 05:55:44 -05:00
Scott Lahteine
b19bba275f No LCD timeout during babystepping 
As requested in #5031
 2016-10-22 05:26:07 -05:00
Scott Lahteine
d963020532 Sort out some header dependencies 2016-10-10 17:14:03 -05:00
Scott Lahteine
f8199b2cc1 Merge pull request #4982 from thinkyhead/rc_abl_bugfix 
Fix planner with kinematics, delta ABL
 2016-10-10 13:24:22 -05:00
Josef Pavlik
f8c2473a71 Improve planner kinematics, fix delta ABL 2016-10-09 13:32:46 -05:00
Scott Lahteine
ff6b23cb0f Fix an issue with shifted LCD lines 2016-10-09 13:00:00 -05:00
Scott Lahteine
a1b50f1102 Cleanup of code style 2016-10-07 15:57:24 -05:00
jaysonkelly
13c9dcc600 Add LCD menu for DAC 2016-10-07 15:13:03 -05:00
Scott Lahteine
c592ccb6f5 Patch max_jerk[Z] menu item 2016-10-02 10:12:47 -05:00
Scott Lahteine
d19cfcfc1d max_jerk array, DEFAULT_XYJERK => DEFAULT_[XY]JERK 2016-10-02 06:34:56 -05:00
Scott Lahteine
850259bb25 Watch bed temp also for Control menu item 2016-09-28 14:14:04 -05:00
Scott Lahteine
ea0dbee3c9 Enable ABL by type, support bilinear on cartesian 2016-09-25 23:35:37 -05:00
Scott Lahteine
145d9005d1 Fix BLTOUCH string and SERVO_DELAY 2016-09-21 01:45:23 -05:00
Scott Lahteine
13523cbf29 Fix and extend BLTouch support 2016-09-20 16:20:36 -05:00
Scott Lahteine
f38a33a5d8 Add handling of BLTouch error state 2016-09-18 22:00:32 -05:00
Scott Lahteine
9429c7db89 Use ABC indices in delta[] 2016-09-18 13:50:38 -05:00
Scott Lahteine
83a41c7ceb Remove SCARA axis_scaling 2016-09-16 15:21:18 -05:00
Scott Lahteine
5ecc7d9f25 Clear LCD button state, apply timer to all 
Addressing #3007
 2016-09-13 16:10:27 -05:00
Scott Lahteine
6ab54c60b1 Add conditionals for kinematics, leveling 2016-09-13 03:32:59 -05:00
Scott Lahteine
e354cf5884 Apply sw_endstops_enabled to manual move 2016-08-21 00:10:08 -05:00
Scott Lahteine
71319adbb8 Wrap ULTIPANEL-dependent code 2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e Move number-to-string function to utility.* 2016-08-20 18:33:11 -05:00
Scott Lahteine
628dcbc764 extruder_multiplier => flow_percentage 2016-08-18 22:13:47 -05:00
Scott Lahteine
132322e4d9 Fix #4614: currentScreen only defined with ULTIPANEL 2016-08-14 00:29:46 -07:00
Scott Lahteine
405afec393 Include decimeters in filamentUsed display 2016-08-12 05:16:43 -07:00
Scott Lahteine
432e9a1f50 Use configured feedrates, center for DELTA_CALIBRATION_MENU 2016-08-11 12:05:55 -07:00
Scott Lahteine
58c8e6cef2 Fixes #4576: Convert filamentUsed to long for display 2016-08-09 23:57:28 -07:00
Scott Lahteine
3be4511230 Patch command order in delta calibration menu 2016-08-08 21:15:25 -07:00
Scott Lahteine
88540d8ecf Fix: LCD displays SD status at startup 2016-08-08 20:53:18 -07:00
Scott Lahteine
b16ea09498 Make DELTA_CALIBRATION_MENU more universal 2016-08-08 20:42:58 -07:00
Scott Lahteine
42927530fe Explicitly clear the screen in lcd_goto_screen 2016-08-06 18:10:39 -07:00
Scott Lahteine
a6d2c2479f Minor cleanup of lcd_goto_screen calls 2016-08-06 18:10:39 -07:00
Scott Lahteine
e47c8b9829 Save bytes for custom chars (Hitachi LCD) 2016-08-06 18:10:39 -07:00
Scott Lahteine
938e6d15c4 Patch up some flaws, here and there 2016-08-05 08:17:37 -07:00
Scott Lahteine
7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 2016-08-03 21:18:38 -07:00
Scott Lahteine
c9123adc59 Improved SCREEN / MENU macros 2016-08-02 18:05:34 -07:00
Scott Lahteine
3cccaa9885 Allow encoder pulse/step override for more LCDs 2016-08-02 15:57:26 -07:00
Scott Lahteine
330f82971b Buzzer requires BEEPER_PIN 2016-08-02 14:05:37 -07:00
Scott Lahteine
38af251b91 Use a default argument in _lcd_move_e 2016-08-01 16:09:26 -07:00
Scott Lahteine
63fd1f49a6 PID_EXTRUSION_SCALING, disabled by default 2016-07-31 17:49:34 -07:00
Scott Lahteine
ad68b4cb8b Followup to #4468 2016-07-30 03:49:42 -07:00
Scott Lahteine
696b63e300 Specify manual-movable E axes by extruder type 2016-07-30 00:36:48 -07:00
Scott Lahteine
b7b7c90477 Merge pull request #4389 from thinkyhead/rc_optimize_planner 
Optimize planner with precalculation, etc.
 2016-07-24 17:48:23 -07:00
Scott Lahteine
f8b5749235 Replace division in planner with multiplication 2016-07-24 13:27:49 -07:00
João Brázio
62d96d72f3 Renamed timestamp_t to duration_t 2016-07-24 03:16:02 +01:00
Scott Lahteine
1766b990b8 Merge pull request #4376 from jbrazio/timestamp_t-short 
Adds short format to timestamp_t
 2016-07-22 21:17:17 -07:00
João Brázio
9e5dbf67e8 Update the stats menu to include longest job and extruded filament 2016-07-23 03:05:45 +01:00
João Brázio
b4aad85c9a Rework stats menu to use timestamp_t 2016-07-23 01:42:21 +01:00
Scott Lahteine
d5e2d523c7 Generalize kinematics function names 2016-07-22 16:36:34 -07:00
Scott Lahteine
0432613ad7 use enabled macro for mapper setting 2016-07-19 18:08:56 -07:00
Scott Lahteine
2bad02e60d Reprapworld Keypad: F1 opens the Move Axis menu 2016-07-19 16:40:39 -07:00
Scott Lahteine
eaa6f568ee Prevent re-entrant call of Reprapworld Keypad handler 2016-07-19 16:40:39 -07:00
Scott Lahteine
06ac1f3bcf Reduce Reprapworld Keypad move code size 2016-07-19 16:40:39 -07:00
Scott Lahteine
8a2efd1155 Rename ultralcd implementation files for consistency 2016-07-19 15:26:14 -07:00
Scott Lahteine
c502018eab Merge pull request #4353 from jbrazio/global-enum-file 
General cleanup: enum
 2016-07-19 13:37:56 -07:00
João Brázio
3ebad4e020 Moves all global enums to a central file 2016-07-19 14:31:09 +01:00
esenapaj
361307831e Follow-up the PR #4335 (Debug char, fix compile errors for lcd pins) 
・Solve a flickering when SD card is inserted or removed at using a ASCII
LCD + language_kana.h
 2016-07-18 20:09:24 +09:00
Scott Lahteine
f242aea032 Merge pull request #4319 from thinkyhead/rc_feedrates_to_mess_with_you 
Wrangle feed rate variables
 2016-07-17 14:07:52 -07:00
Scott Lahteine
9f9fe043ba Apply sq macro throughout 2016-07-17 13:29:41 -07:00
Scott Lahteine
93ba5bddd7 Append units to feedrate variables 2016-07-17 13:29:41 -07:00
Scott Lahteine
94955a8bf7 pad string in lcd_finishstatus 2016-07-17 12:27:37 -07:00
Scott Lahteine
05da02f0a2 Implement MIXING_EXTRUDER and SWITCHING_EXTRUDER 2016-07-17 10:53:10 -07:00
Scott Lahteine
9766e24504 Merge pull request #4277 from thinkyhead/rc_mks_13_viki2 
Support for VIKI2 with MKS 1.3 / 1.4
 2016-07-16 23:49:33 -07:00
Scott Lahteine
aaa0d298b9 Merge pull request #4326 from thinkyhead/rc_no_static_items_fix 
Suppress compiler warnings in ultralcd.cpp
 2016-07-16 23:38:08 -07:00
Petr Zahradník junior
2d7fe9dc78 LCD Longer print 2016-07-16 18:21:06 -07:00
Scott Lahteine
d53dcaa796 Suppress some compiler warnings 2016-07-16 17:59:01 -07:00
Scott Lahteine
95ab2fd3ae Fix skipping of static items 2016-07-14 19:16:16 -07:00
Scott Lahteine
c5e51f6b96 finished => completed 2016-07-14 11:46:35 -07:00
Scott Lahteine
e481b79af1 Allow stopwatch and printcounter to go over 18 hours 2016-07-14 11:39:57 -07:00
Scott Lahteine
2224032568 Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine 
No delay for the smallest LCD moves
 2016-07-12 20:16:38 -07:00
Scott Lahteine
a8b6b6a128 Merge pull request #4252 from thinkyhead/rc_rename_hpb 
Replace PLA/ABS preheating with generic
 2016-07-12 20:00:33 -07:00
Scott Lahteine
ecd5e810ac No delay for the smallest LCD moves 2016-07-12 18:09:01 -07:00
Scott Lahteine
2b9515d60f Merge pull request #4281 from AnHardt/lang-system 
Don't use UTF-strlen() if the text is not UTF
 2016-07-12 17:21:28 -07:00
Scott Lahteine
e9f62d8fdb Remove extraneous conditions for encoder position 2016-07-12 16:41:00 -07:00
AnHardt
54d35230df Don't use UTF-strlen() if the text is not UTF 2016-07-12 19:59:03 +02:00
Scott Lahteine
4865447830 Merge pull request #4276 from esenapaj/Suppress-warnings 
Suppress warnings
 2016-07-11 19:08:59 -07:00
Scott Lahteine
6e68dd292b Merge pull request #4243 from thinkyhead/rc_fix_static_scrolling 
Improve STATIC_ITEM implementation
 2016-07-11 18:25:00 -07:00