mirror of
https://github.com/MarlinFirmware/Marlin.git
synced 2024-11-25 12:57:53 +00:00
10 lines
663 B
Markdown
10 lines
663 B
Markdown
|
|
|
|
__Note for RAMPS users:__
|
|
----------------------
|
|
|
|
-By default, RAMPS have no power on servo bus (if you happen to have a multimeter, check the voltage on servo power pins).
|
|
-In order to get the servo working, you need to supply 5V to 5V pin.. You can do it using your power supply (if it has a 5V output) or jumping the "Vcc" from Arduino to the 5V RAMPS rail.
|
|
-These 2 pins are located just between the Reset Button and the yellow fuses... There are marks in the board showing 5V and VCC.. just connect them..
|
|
-If jumping the arduino Vcc do RAMPS 5V rail, take care to not use a power hungry servo, otherwise you will cause a blackout in the arduino board ;-)
|