3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-11-25 04:48:31 +00:00
Code Issues Releases Wiki Activity
57564ae576
MarlinFirmware/Marlin/language_it.h
Scott Lahteine aa30550b21 Keep SIMULATE_ROMFONT only language.h
2016-08-15 19:11:31 -07:00

249 lines
12 KiB
C
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Italian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_IT_H
#define LANGUAGE_IT_H
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " pronto."
#define MSG_SD_INSERTED "SD Card inserita"
#define MSG_SD_REMOVED "SD Card rimossa"
#define MSG_LCD_ENDSTOPS "Endstop"
#define MSG_MAIN "Menu principale"
#define MSG_AUTOSTART "Autostart"
#define MSG_DISABLE_STEPPERS "Disabilita Motori"
#define MSG_AUTO_HOME "Auto Home"
#define MSG_AUTO_HOME_X "Home asse X"
#define MSG_AUTO_HOME_Y "Home asse Y"
#define MSG_AUTO_HOME_Z "Home asse Z"
#define MSG_LEVEL_BED_HOMING "Home assi XYZ"
#define MSG_LEVEL_BED_WAITING "Premi per iniziare"
#define MSG_LEVEL_BED_NEXT_POINT "Punto successivo"
#define MSG_LEVEL_BED_DONE "Livel. terminato!"
#define MSG_LEVEL_BED_CANCEL "Annulla"
#define MSG_SET_HOME_OFFSETS "Imp. offset home"
#define MSG_HOME_OFFSETS_APPLIED "Offset applicato"
#define MSG_SET_ORIGIN "Imposta Origine"
#define MSG_PREHEAT_1 "Preriscalda PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Tutto"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Piatto"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_2 "Preriscalda ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Tutto"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Piatto"
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf"
#define MSG_COOLDOWN "Raffredda"
#define MSG_SWITCH_PS_ON "Accendi aliment."
#define MSG_SWITCH_PS_OFF "Spegni aliment."
#define MSG_EXTRUDE "Estrudi"
#define MSG_RETRACT "Ritrai"
#define MSG_MOVE_AXIS "Muovi Asse"
#define MSG_LEVEL_BED "Livella piano"
#define MSG_MOVE_X "Muovi X"
#define MSG_MOVE_Y "Muovi Y"
#define MSG_MOVE_Z "Muovi Z"
#define MSG_MOVE_E "Estrusore"
#define MSG_MOVE_01MM "Muovi di 0.1mm"
#define MSG_MOVE_1MM "Muovi di 1mm"
#define MSG_MOVE_10MM "Muovi di 10mm"
#if ENABLED(DOGLCD)
#define MSG_SPEED "Velocità"
#else
#define MSG_SPEED "Velocita"
#endif
#define MSG_BED_Z "piatto Z"
#define MSG_NOZZLE "Ugello"
#define MSG_BED "Piatto"
#if ENABLED(DOGLCD)
#define MSG_FAN_SPEED "Velocità ventola"
#else
#define MSG_FAN_SPEED "Velocita ventola"
#endif
#define MSG_FLOW "Flusso"
#define MSG_CONTROL "Controllo"
#define MSG_MIN LCD_STR_THERMOMETER " Min"
#define MSG_MAX LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "Seleziona"
#define MSG_ACC "Accel"
#define MSG_VXY_JERK "Vxy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-Spostamento"
#define MSG_XSTEPS "Xpassi/mm"
#define MSG_YSTEPS "Ypassi/mm"
#define MSG_ZSTEPS "Zpassi/mm"
#define MSG_ESTEPS "Epassi/mm"
#define MSG_TEMPERATURE "Temperatura"
#define MSG_MOTION "Movimento"
#define MSG_VOLUMETRIC "Filamento"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Diam. filo"
#define MSG_CONTRAST "Contrasto LCD"
#define MSG_STORE_EPROM "Salva in memoria"
#define MSG_LOAD_EPROM "Carica da memoria"
#define MSG_RESTORE_FAILSAFE "Ripristina imp."
#define MSG_REFRESH "Aggiorna"
#define MSG_WATCH "Guarda"
#define MSG_PREPARE "Prepara"
#define MSG_TUNE "Regola"
#define MSG_PAUSE_PRINT "Pausa"
#define MSG_RESUME_PRINT "Riprendi stampa"
#define MSG_STOP_PRINT "Arresta stampa"
#define MSG_CARD_MENU "Stampa da SD"
#define MSG_NO_CARD "SD non presente"
#define MSG_DWELL "Sospensione..."
#define MSG_USERWAIT "Attendi Utente.."
#define MSG_RESUMING "Riprendi Stampa"
#define MSG_PRINT_ABORTED "Stampa annullata"
#define MSG_NO_MOVE "Nessun Movimento"
#define MSG_KILLED "UCCISO. "
#define MSG_STOPPED "ARRESTATO. "
#define MSG_CONTROL_RETRACT "Ritrai mm"
#define MSG_CONTROL_RETRACT_SWAP "Scamb. Ritrai mm"
#define MSG_CONTROL_RETRACTF "Ritrai V"
#define MSG_CONTROL_RETRACT_ZLIFT "Salta mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Scamb. UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRitrai"
#define MSG_FILAMENTCHANGE "Cambia filamento"
#define MSG_INIT_SDCARD "Iniz. SD-Card"
#define MSG_CNG_SDCARD "Cambia SD-Card"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "prima"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Finecorsa abort"
#define MSG_HEATING_FAILED_LCD "Riscald. Fallito"
#define MSG_ERR_REDUNDANT_TEMP "Err: TEMP RIDONDANTI"
#define MSG_THERMAL_RUNAWAY "TEMP FUORI CONTROLLO"
#define MSG_ERR_MAXTEMP "Err: TEMP MASSIMA"
#define MSG_ERR_MINTEMP "Err: TEMP MINIMA"
#define MSG_ERR_MAXTEMP_BED "Err: TEMP MASSIMA PIATTO"
#define MSG_ERR_MINTEMP_BED "Err: TEMP MINIMA PIATTO"
#define MSG_HALTED "STAMPANTE FERMATA"
#define MSG_PLEASE_RESET "Riavviare prego"
#define MSG_SHORT_DAY "g" // One character only
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Riscaldamento.."
#define MSG_HEATING_COMPLETE "Risc. completato"
#define MSG_BED_HEATING "Risc. Piatto.."
#define MSG_BED_DONE "Piatto Pronto"
#define MSG_DELTA_CALIBRATE "Calibraz. Delta"
#define MSG_DELTA_CALIBRATE_X "Calibra X"
#define MSG_DELTA_CALIBRATE_Y "Calibra Y"
#define MSG_DELTA_CALIBRATE_Z "Calibra Z"
#define MSG_DELTA_CALIBRATE_CENTER "Calibra Center"
#define MSG_INFO_MENU "Riguardo stampante"
#define MSG_INFO_PRINTER_MENU "Info. stampante"
#define MSG_INFO_STATS_MENU "Statistiche"
#define MSG_INFO_BOARD_MENU "Info. scheda"
#define MSG_INFO_THERMISTOR_MENU "Termistori"
#define MSG_INFO_EXTRUDERS "Estrusori"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocollo"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Contat. stampa"
#define MSG_INFO_COMPLETED_PRINTS "Completati"
#define MSG_INFO_PRINT_TIME "Tempo totale"
#if ENABLED(DOGLCD)
#define MSG_INFO_PRINT_LONGEST "Lavoro più lungo"
#else
#define MSG_INFO_PRINT_LONGEST "Lavoro piu lungo"
#endif
#define MSG_INFO_PRINT_FILAMENT "Totale estruso"
#else
#define MSG_INFO_PRINT_COUNT "Stampe"
#define MSG_INFO_COMPLETED_PRINTS "Completati"
#define MSG_INFO_PRINT_TIME "Durata"
#if ENABLED(DOGLCD)
#define MSG_INFO_PRINT_LONGEST "Più lungo"
#else
#define MSG_INFO_PRINT_LONGEST "Piu lungo"
#endif
#define MSG_INFO_PRINT_FILAMENT "Estruso"
#endif
#define MSG_INFO_MIN_TEMP "Temp min"
#define MSG_INFO_MAX_TEMP "Temp max"
#define MSG_INFO_PSU "Alimentatore"
#define MSG_FILAMENT_CHANGE_HEADER "CAMBIA FILAMENTO"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CAMBIA OPZIONI:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Estrusione"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Riprendi stampa"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Attendere avvio"
#define MSG_FILAMENT_CHANGE_INIT_2 "del cambio"
#define MSG_FILAMENT_CHANGE_INIT_3 "di filamento"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Attendere"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "l'espulsione"
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "del filamento"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Inserisci il"
#define MSG_FILAMENT_CHANGE_INSERT_2 "filamento e"
#define MSG_FILAMENT_CHANGE_INSERT_3 "premi per cont"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Attendere"
#define MSG_FILAMENT_CHANGE_LOAD_2 "il caricamento"
#define MSG_FILAMENT_CHANGE_LOAD_3 "del filamento"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Attendere"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "l'estrusione"
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "del filamento"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Attendere"
#define MSG_FILAMENT_CHANGE_RESUME_2 "la ripresa"
#define MSG_FILAMENT_CHANGE_RESUME_3 "della stampa"
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Attendere..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Espulsione..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Inserisci e premi"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Caricamento..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Estrusione..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Ripresa..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_IT_H
Reference in New Issue View Git Blame Copy Permalink