3DPrinting/MarlinFirmware
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Marlin.git synced 2024-12-18 08:17:18 +00:00
Code Issues Releases Wiki Activity
5d8036e554
MarlinFirmware/Marlin/example_configurations/delta/kossel_xl
History
Scott Lahteine 0da744b7b0 Further cleanup of comments, partial Doxygen-style 
Following up on #3231
2016-03-25 00:45:56 -07:00
..
Configuration_adv.h Further cleanup of comments, partial Doxygen-style 2016-03-25 00:45:56 -07:00
Configuration.h Further cleanup of comments, partial Doxygen-style 2016-03-25 00:45:56 -07:00
README.md

README.md

Configuration for Kossel k800 XL

This example configuration ist for a Kossel XL with a printable bed diameter of 280mm and a height of 385mm. It also has the auto bed leveling probe (with a endstop switch) and the heat bed activated.

Configuration

You might have/want to edit at least the following settings in Configuration.h:

  • MANUAL_Z_HOME_POS The hight of your printing space available, auto bed leveling makes this not as important as before
  • DELTA_PRINTABLE_RADIUS The printable radius
  • DEFAULT_AXIS_STEPS_PER_UNIT [http://zennmaster.com/makingstuff/reprap-101-calibrating-your-extruder-part-1-e-steps](The steps for the extruder to optimize the amount of filament flow)

Fine tuning

  • Increase DELTA_RADIUS when the model is convex (bulge in the middle)
  • Increase DELTA_DIAGONAL_ROD when the model is larger then expected

[http://reprap.org/wiki/PID_Tuning](PID Tuning)

  • DEFAULT_Kp (PID tuning for the hotend)
  • DEFAULT_Ki (PID tuning for the hotend)
  • DEFAULT_Kd (PID tuning for the hotend)

PSU Options

  • The power supply is configured to 2 (to use a relay to switch 12V on and off)
  • It is configured to be off by default