2021-01-26 10:08:57 +00:00
# Translation of Prusa-Firmware into Spanish.
#
msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: es\n"
"Project-Id-Version: Prusa-Firmware\n"
2021-12-21 13:31:04 +00:00
"POT-Creation-Date: Sun 19 Dec 2021 07:17:30 PM CET\n"
"PO-Revision-Date: Sun 19 Dec 2021 07:17:30 PM CET\n"
2021-01-26 10:08:57 +00:00
"Language-Team: \n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Last-Translator: \n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
# MSG_IR_03_OR_OLDER c=18
#: messages.c:164
msgid " 0.3 or older"
msgstr " 0.3 o mayor"
2021-04-29 13:41:47 +00:00
# MSG_FS_V_03_OR_OLDER c=18
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:9884
2021-01-26 10:08:57 +00:00
msgid "FS v0.3 or older"
msgstr "FS 0.3 o mayor"
# MSG_IR_04_OR_NEWER c=18
#: messages.c:163
msgid " 0.4 or newer"
msgstr " 0.4 o mas nueva"
2021-04-29 13:41:47 +00:00
# MSG_FS_V_04_OR_NEWER c=18
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:9883
2021-01-26 10:08:57 +00:00
msgid "FS v0.4 or newer"
msgstr "FS 0.4 o mas nueva"
# MSG_IR_UNKNOWN c=18
#: messages.c:165
msgid "unknown state"
msgstr "estado desconocido"
2021-04-29 13:41:47 +00:00
# MSG_MEASURED_OFFSET c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2913
2021-01-26 10:08:57 +00:00
msgid "[0;0] point offset"
msgstr "[0;0] punto offset"
# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#:
msgid "Crash detection can\x0abe turned on only in\x0aNormal mode"
msgstr "Dec. choque puede\x0aser activada solo en\x0aModo normal"
# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#:
msgid "WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
msgstr "ATENCION:\x0aDec. choque\x0adesactivada en\x0aModo silencio"
# MSG_BABYSTEPPING_Z c=15
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3034
2021-01-26 10:08:57 +00:00
msgid "Adjusting Z:"
msgstr "Ajustar-Z:"
# MSG_SELFTEST_CHECK_ALLCORRECT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8490
2021-04-29 13:41:47 +00:00
msgid "All correct"
2021-01-26 10:08:57 +00:00
msgstr "Todo bien"
# MSG_WIZARD_DONE c=20 r=8
2021-04-29 13:41:47 +00:00
#: messages.c:118
2021-01-26 10:08:57 +00:00
msgid "All is done. Happy printing!"
msgstr "Terminado! Feliz impresion!"
2021-04-29 13:41:47 +00:00
# MSG_AMBIENT c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1727
2021-01-26 10:08:57 +00:00
msgid "Ambient"
msgstr "Ambiente"
# MSG_AUTO c=6
#: messages.c:160
msgid "Auto"
msgstr ""
# MSG_PRESS c=20 r=2
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2485
2021-01-26 10:08:57 +00:00
msgid "and press the knob"
2021-04-29 13:41:47 +00:00
msgstr "y presione el dial"
2021-01-26 10:08:57 +00:00
# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3355
2021-01-26 10:08:57 +00:00
msgid "Are left and right Z~carriages all up?"
msgstr "Carros Z izq./der. estan arriba maximo?"
2021-04-29 13:41:47 +00:00
# MSG_AUTO_HOME c=18
2021-01-26 10:08:57 +00:00
#: messages.c:11
msgid "Auto home"
msgstr "Llevar al origen"
# MSG_AUTOLOAD_FILAMENT c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6732
2021-01-26 10:08:57 +00:00
msgid "AutoLoad filament"
msgstr "Carga auto. filam."
# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4317
2021-01-26 10:08:57 +00:00
msgid "Autoloading filament available only when filament sensor is turned on..."
msgstr "La carga automatica solo funciona si el sensor de filamento esta activado..."
# MSG_AUTOLOADING_ENABLED c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2648
2021-01-26 10:08:57 +00:00
msgid "Autoloading filament is active, just press the knob and insert filament..."
msgstr "La carga automatica esta activada, pulse el dial e inserte el filamento..."
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_AXIS_LENGTH c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8173
2021-01-26 10:08:57 +00:00
msgid "Axis length"
msgstr "Longitud del eje"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_AXIS c=16
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8174
2021-01-26 10:08:57 +00:00
msgid "Axis"
msgstr "Eje"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_BEDHEATER c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8131
2021-04-29 13:41:47 +00:00
msgid "Bed/Heater"
msgstr "Base/Calentador"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_BED_DONE c=20
2021-01-26 10:08:57 +00:00
#: messages.c:15
msgid "Bed done"
msgstr "Base preparada"
2021-04-29 13:41:47 +00:00
# MSG_BED_HEATING c=20
2021-01-26 10:08:57 +00:00
#: messages.c:16
msgid "Bed Heating"
msgstr "Calentando Base"
2021-04-29 13:41:47 +00:00
# MSG_BED_CORRECTION_MENU c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5798
2021-01-26 10:08:57 +00:00
msgid "Bed level correct"
msgstr "Corr. de la cama"
2021-04-29 13:41:47 +00:00
# MSG_BELTTEST c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5778
2021-04-29 13:41:47 +00:00
msgid "Belt test"
msgstr "Test cinturon"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
2021-01-26 10:08:57 +00:00
#: messages.c:17
2021-04-29 13:41:47 +00:00
msgid "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for reset."
2021-01-26 10:08:57 +00:00
msgstr "Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset."
# MSG_BRIGHT c=6
#: messages.c:158
msgid "Bright"
msgstr "Brill."
# MSG_BRIGHTNESS c=18
#: messages.c:154
msgid "Brightness"
msgstr "Brillo"
2021-04-29 13:41:47 +00:00
# MSG_BED c=13
2021-01-26 10:08:57 +00:00
#: messages.c:14
msgid "Bed"
msgstr "Base"
# MSG_BELT_STATUS c=18
2021-04-29 13:41:47 +00:00
#: messages.c:19
2021-01-26 10:08:57 +00:00
msgid "Belt status"
msgstr "Estado de correa"
# MSG_RECOVER_PRINT c=20 r=2
2021-04-29 13:41:47 +00:00
#: messages.c:82
2021-01-26 10:08:57 +00:00
msgid "Blackout occurred. Recover print?"
2021-04-29 13:41:47 +00:00
msgstr "Se fue la luz. Re- anudar la impresion?"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_CALIBRATING_HOME c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8492
2021-01-26 10:08:57 +00:00
msgid "Calibrating home"
2021-04-29 13:41:47 +00:00
msgstr "Calibrar pos.inicial"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_CALIBRATE_BED c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5787
2021-01-26 10:08:57 +00:00
msgid "Calibrate XYZ"
msgstr "Calibrar XYZ"
2021-04-29 13:41:47 +00:00
# MSG_HOMEYZ c=18
#: messages.c:52
2021-01-26 10:08:57 +00:00
msgid "Calibrate Z"
msgstr "Calibrar Z"
2021-04-29 13:41:47 +00:00
# MSG_CALIBRATE_PINDA c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4529
2021-01-26 10:08:57 +00:00
msgid "Calibrate"
msgstr "Calibrar"
2021-04-29 13:41:47 +00:00
# MSG_CANCEL2 c=10
#: messages.c:20
msgid ">Cancel"
msgstr ">Cancelar"
2021-01-26 10:08:57 +00:00
# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3318
2021-01-26 10:08:57 +00:00
msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
msgstr "Calibrando XYZ. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
# MSG_CALIBRATE_Z_AUTO c=20 r=2
2021-04-29 13:41:47 +00:00
#: messages.c:21
2021-01-26 10:08:57 +00:00
msgid "Calibrating Z"
msgstr "Calibrando Z"
# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3318
2021-01-26 10:08:57 +00:00
msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
msgstr "Calibrando Z. Gira el dial para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
2021-04-29 13:41:47 +00:00
# MSG_HOMEYZ_DONE c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:656
2021-01-26 10:08:57 +00:00
msgid "Calibration done"
msgstr "Calibracion OK"
2021-04-29 13:41:47 +00:00
# MSG_MENU_CALIBRATION c=18
#: messages.c:68
2021-01-26 10:08:57 +00:00
msgid "Calibration"
msgstr "Calibracion"
2021-04-29 13:41:47 +00:00
# MSG_SD_REMOVED c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8939
2021-01-26 10:08:57 +00:00
msgid "Card removed"
msgstr "Tarjeta retirada"
2021-04-29 13:41:47 +00:00
# MSG_CHECKING_FILE c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8580
2021-04-29 13:41:47 +00:00
msgid "Checking file"
msgstr "Verif. archivo"
# MSG_NOT_COLOR c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2565
2021-01-26 10:08:57 +00:00
msgid "Color not correct"
msgstr "Color no homogeneo"
2021-04-29 13:41:47 +00:00
# MSG_COOLDOWN c=18
#: messages.c:27
2021-01-26 10:08:57 +00:00
msgid "Cooldown"
msgstr "Enfriar"
2021-04-29 13:41:47 +00:00
# MSG_COPY_SEL_LANG c=20 r=3
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4435
2021-01-26 10:08:57 +00:00
msgid "Copy selected language?"
msgstr "Copiar idioma seleccionado?"
# MSG_CRASHDETECT c=13
2021-04-29 13:41:47 +00:00
#: messages.c:30
2021-01-26 10:08:57 +00:00
msgid "Crash det."
msgstr "Det. choque"
2021-04-29 13:41:47 +00:00
# MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4842
2021-01-26 10:08:57 +00:00
msgid "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
msgstr "Escoge un filamento para la Calibracion de la Primera Capa y seleccionalo en el menu en pantalla."
2021-04-29 13:41:47 +00:00
# MSG_CRASH_DETECTED c=20
#: messages.c:29
2021-01-26 10:08:57 +00:00
msgid "Crash detected."
msgstr "Choque detectado."
2021-04-29 13:41:47 +00:00
# MSG_CRASH_RESUME c=20 r=3
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:651
2021-01-26 10:08:57 +00:00
msgid "Crash detected. Resume print?"
msgstr "Choque detectado. Continuar impresion?"
# MSG_CRASH c=7
2021-04-29 13:41:47 +00:00
#: messages.c:28
2021-01-26 10:08:57 +00:00
msgid "Crash"
msgstr "Choque"
2021-04-29 13:41:47 +00:00
# MSG_CURRENT c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5929
2021-01-26 10:08:57 +00:00
msgid "Current"
msgstr "Actual"
2021-04-29 13:41:47 +00:00
# MSG_DATE c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1985
2021-01-26 10:08:57 +00:00
msgid "Date:"
msgstr "Fecha:"
2021-04-29 13:41:47 +00:00
# MSG_COMMUNITY_MADE c=18
#: messages.c:25
msgid "Community made"
msgstr "Desde la comunidad"
# MSG_DISABLE_STEPPERS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5678
2021-01-26 10:08:57 +00:00
msgid "Disable steppers"
msgstr "Apagar motores"
# MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: messages.c:13
msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
msgstr "Distancia entre la punta del boquilla y la superficie de la base aun no fijada. Por favor siga el manual, capitulo Primeros Pasos, Calibracion primera capa."
# MSG_FS_CONTINUE c=5
#: messages.c:152
msgid "Cont."
msgstr ""
# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5021
2021-01-26 10:08:57 +00:00
msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
msgstr "Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"
# MSG_EXTRUDER_CORRECTION c=13
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5090
2021-01-26 10:08:57 +00:00
msgid "E-correct:"
msgstr "Corregir-E:"
# MSG_EJECT_FILAMENT c=16
2021-04-29 13:41:47 +00:00
#: messages.c:60
2021-01-26 10:08:57 +00:00
msgid "Eject filament"
msgstr "Expulsar fil."
2021-04-29 13:41:47 +00:00
# MSG_EJECTING_FILAMENT c=20
2021-12-16 10:52:35 +00:00
#: mmu.cpp:1415
2021-01-26 10:08:57 +00:00
msgid "Ejecting filament"
msgstr "Expulsando filamento"
# MSG_SELFTEST_ENDSTOP_NOTHIT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8149
2021-01-26 10:08:57 +00:00
msgid "Endstop not hit"
msgstr "Endstop no alcanzado"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_ENDSTOP c=16
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8144
2021-01-26 10:08:57 +00:00
msgid "Endstop"
msgstr ""
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_ENDSTOPS c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8135
2021-01-26 10:08:57 +00:00
msgid "Endstops"
msgstr ""
# MSG_STACK_ERROR c=20 r=4
2021-12-16 10:52:35 +00:00
#:
2021-01-26 10:08:57 +00:00
msgid "Error - static memory has been overwritten"
msgstr "Error - se ha sobre-escrito la memoria estatica"
# MSG_CUT_FILAMENT c=16
2021-04-29 13:41:47 +00:00
#: messages.c:61
2021-01-26 10:08:57 +00:00
msgid "Cut filament"
msgstr "Cortar filament"
# MSG_CUTTER c=9
2021-04-29 13:41:47 +00:00
#: messages.c:128
2021-01-26 10:08:57 +00:00
msgid "Cutter"
msgstr "Cuchillo"
2021-04-29 13:41:47 +00:00
# MSG_MMU_CUTTING_FIL c=18
2021-12-16 10:52:35 +00:00
#: mmu.cpp:1387
2021-01-26 10:08:57 +00:00
msgid "Cutting filament"
msgstr "Corte de filament"
# MSG_FSENS_NOT_RESPONDING c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4330
2021-01-26 10:08:57 +00:00
msgid "ERROR: Filament sensor is not responding, please check connection."
2021-04-29 13:41:47 +00:00
msgstr "ERROR:Sensor de fi- lamento no responde Por favor, comprue- ba la conexion."
2021-01-26 10:08:57 +00:00
# MSG_DIM c=6
#: messages.c:159
msgid "Dim"
2021-04-29 13:41:47 +00:00
msgstr "Oscuro"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_ERROR c=10
#: messages.c:31
2021-01-26 10:08:57 +00:00
msgid "ERROR:"
msgstr ""
# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8498
2021-01-26 10:08:57 +00:00
msgid "Extruder fan:"
msgstr "Vent.extrusor:"
# MSG_INFO_EXTRUDER c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2040
2021-01-26 10:08:57 +00:00
msgid "Extruder info"
msgstr "Info. del extrusor"
# MSG_EXTRUDER c=17
2021-04-29 13:41:47 +00:00
#: messages.c:32
2021-01-26 10:08:57 +00:00
msgid "Extruder"
msgstr "Extruir"
2021-04-29 13:41:47 +00:00
# MSG_MMU_FAIL_STATS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6754
2021-01-26 10:08:57 +00:00
msgid "Fail stats MMU"
2021-04-29 13:41:47 +00:00
msgstr "Total Fallos MMU"
2021-01-26 10:08:57 +00:00
# MSG_FSENSOR_AUTOLOAD c=13
2021-04-29 13:41:47 +00:00
#: messages.c:48
2021-01-26 10:08:57 +00:00
msgid "F. autoload"
msgstr "Autocarg.fil."
2021-04-29 13:41:47 +00:00
# MSG_FAIL_STATS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6751
2021-01-26 10:08:57 +00:00
msgid "Fail stats"
2021-04-29 13:41:47 +00:00
msgstr "Estadistica Fallos"
2021-01-26 10:08:57 +00:00
# MSG_FAN_SPEED c=14
2021-04-29 13:41:47 +00:00
#: messages.c:36
2021-01-26 10:08:57 +00:00
msgid "Fan speed"
msgstr "Velocidad Vent"
# MSG_SELFTEST_FAN c=20
2021-04-29 13:41:47 +00:00
#: messages.c:91
2021-01-26 10:08:57 +00:00
msgid "Fan test"
msgstr "Test ventiladores"
# MSG_FANS_CHECK c=13
2021-04-29 13:41:47 +00:00
#: messages.c:33
2021-01-26 10:08:57 +00:00
msgid "Fans check"
msgstr "Comprob.vent"
2021-04-29 13:41:47 +00:00
# MSG_FSENSOR c=12
#: messages.c:49
2021-01-26 10:08:57 +00:00
msgid "Fil. sensor"
msgstr "Sensor Fil."
2021-04-29 13:41:47 +00:00
# MSG_FIL_RUNOUTS c=15
#: messages.c:34
msgid "Fil. runouts"
msgstr "Fil. acabado"
2021-01-26 10:08:57 +00:00
# MSG_FILAMENT_CLEAN c=20 r=2
2021-04-29 13:41:47 +00:00
#: messages.c:37
2021-01-26 10:08:57 +00:00
msgid "Filament extruding & with correct color?"
msgstr "Es nitido el color nuevo?"
# MSG_NOT_LOADED c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2564
2021-01-26 10:08:57 +00:00
msgid "Filament not loaded"
msgstr "Fil. no introducido"
# MSG_FILAMENT_SENSOR c=20
2021-04-29 13:41:47 +00:00
#: messages.c:97
2021-01-26 10:08:57 +00:00
msgid "Filament sensor"
msgstr "Sensor de filamento"
# MSG_FILAMENT_USED c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2713
2021-01-26 10:08:57 +00:00
msgid "Filament used"
msgstr "Filamento usado"
2021-04-29 13:41:47 +00:00
# MSG_PRINT_TIME c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2714
2021-01-26 10:08:57 +00:00
msgid "Print time"
2021-04-29 13:41:47 +00:00
msgstr "Tiempo de imp."
2021-01-26 10:08:57 +00:00
# MSG_FS_ACTION c=10
#: messages.c:151
msgid "FS Action"
msgstr "FS accion"
# MSG_FILE_INCOMPLETE c=20 r=3
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8634
2021-01-26 10:08:57 +00:00
msgid "File incomplete. Continue anyway?"
msgstr "Archivo incompleto. ?Continuar de todos modos?"
# MSG_FINISHING_MOVEMENTS c=20
2021-04-29 13:41:47 +00:00
#: messages.c:45
2021-01-26 10:08:57 +00:00
msgid "Finishing movements"
msgstr "Term. movimientos"
# MSG_V2_CALIBRATION c=18
2021-04-29 13:41:47 +00:00
#: messages.c:124
2021-01-26 10:08:57 +00:00
msgid "First layer cal."
msgstr "Cal. primera cap."
# MSG_WIZARD_SELFTEST c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4942
2021-01-26 10:08:57 +00:00
msgid "First, I will run the selftest to check most common assembly problems."
msgstr "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes."
2021-04-29 13:41:47 +00:00
# MSG_MMU_FIX_ISSUE c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:727
2021-01-26 10:08:57 +00:00
msgid "Fix the issue and then press button on MMU unit."
msgstr "Corrige el problema y pulsa el boton en la unidad MMU."
2021-04-29 13:41:47 +00:00
# MSG_FLOW c=15
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6888
2021-01-26 10:08:57 +00:00
msgid "Flow"
msgstr "Flujo"
# MSG_SELFTEST_COOLING_FAN c=20
2021-04-29 13:41:47 +00:00
#: messages.c:88
2021-01-26 10:08:57 +00:00
msgid "Front print fan?"
msgstr "Vent. frontal?"
2021-04-29 13:41:47 +00:00
# MSG_BED_CORRECTION_FRONT c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3116
2021-01-26 10:08:57 +00:00
msgid "Front side[um]"
msgstr "Frontal [um]"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_FANS c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8179
2021-01-26 10:08:57 +00:00
msgid "Front/left fans"
2021-04-29 13:41:47 +00:00
msgstr "Vents. front/izqui"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_HEATERTHERMISTOR c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8127
2021-01-26 10:08:57 +00:00
msgid "Heater/Thermistor"
msgstr "Calentador/Termistor"
2021-04-29 13:41:47 +00:00
# MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:9874
2021-01-26 10:08:57 +00:00
msgid "Heating disabled by safety timer."
msgstr "Calentadores desactivados por el temporizador de seguridad."
# MSG_HEATING_COMPLETE c=20
2021-04-29 13:41:47 +00:00
#: messages.c:51
2021-01-26 10:08:57 +00:00
msgid "Heating done."
msgstr "Calentando acabado."
2021-04-29 13:41:47 +00:00
# MSG_HEATING c=20
#: messages.c:50
2021-01-26 10:08:57 +00:00
msgid "Heating"
msgstr "Calentando..."
# MSG_WIZARD_WELCOME c=20 r=7
2021-04-29 13:41:47 +00:00
#: messages.c:121
2021-01-26 10:08:57 +00:00
msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
msgstr "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?"
2021-04-29 13:41:47 +00:00
# MSG_FILAMENTCHANGE c=18
#: messages.c:43
2021-01-26 10:08:57 +00:00
msgid "Change filament"
msgstr "Cambiar filamento"
2021-04-29 13:41:47 +00:00
# MSG_CHANGE_SUCCESS c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2494
2021-01-26 10:08:57 +00:00
msgid "Change success!"
2021-04-29 13:41:47 +00:00
msgstr "Cambio correcto!"
2021-01-26 10:08:57 +00:00
# MSG_CORRECTLY c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2562
2021-01-26 10:08:57 +00:00
msgid "Changed correctly?"
msgstr "Cambio correcto?"
# MSG_SELFTEST_CHECK_BED c=20
2021-04-29 13:41:47 +00:00
#: messages.c:94
msgid "Checking bed"
2021-01-26 10:08:57 +00:00
msgstr "Control base cal."
# MSG_SELFTEST_CHECK_ENDSTOPS c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8481
2021-01-26 10:08:57 +00:00
msgid "Checking endstops"
msgstr "Control endstops"
# MSG_SELFTEST_CHECK_HOTEND c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8487
2021-04-29 13:41:47 +00:00
msgid "Checking hotend"
2021-01-26 10:08:57 +00:00
msgstr "Control fusor"
# MSG_SELFTEST_CHECK_FSENSOR c=20
2021-04-29 13:41:47 +00:00
#: messages.c:95
msgid "Checking sensors"
2021-01-26 10:08:57 +00:00
msgstr "Comprobando sensores"
# MSG_CHECKING_X c=20
2021-04-29 13:41:47 +00:00
#: messages.c:23
2021-01-26 10:08:57 +00:00
msgid "Checking X axis"
msgstr "Control sensor X"
# MSG_CHECKING_Y c=20
2021-04-29 13:41:47 +00:00
#: messages.c:24
2021-01-26 10:08:57 +00:00
msgid "Checking Y axis"
msgstr "Control sensor Y"
# MSG_SELFTEST_CHECK_Z c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8484
2021-01-26 10:08:57 +00:00
msgid "Checking Z axis"
msgstr "Control sensor Z"
2021-04-29 13:41:47 +00:00
# MSG_CHOOSE_EXTRUDER c=20
#: messages.c:54
2021-01-26 10:08:57 +00:00
msgid "Choose extruder:"
msgstr "Elegir extrusor:"
2021-04-29 13:41:47 +00:00
# MSG_CHOOSE_FILAMENT c=20
#: messages.c:55
2021-01-26 10:08:57 +00:00
msgid "Choose filament:"
msgstr "Elije filamento:"
2021-04-29 13:41:47 +00:00
# MSG_FILAMENT c=17
#: messages.c:35
2021-01-26 10:08:57 +00:00
msgid "Filament"
msgstr "Filamento"
# MSG_WIZARD_XYZ_CAL c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4951
2021-01-26 10:08:57 +00:00
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."
# MSG_WIZARD_Z_CAL c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4959
2021-01-26 10:08:57 +00:00
msgid "I will run z calibration now."
msgstr "Voy a hacer Calibracion Z ahora."
2021-04-29 13:41:47 +00:00
# MSG_WATCH c=18
#: messages.c:116
2021-01-26 10:08:57 +00:00
msgid "Info screen"
msgstr "Monitorizar"
# MSG_INSERT_FILAMENT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2482
2021-01-26 10:08:57 +00:00
msgid "Insert filament"
msgstr "Introducir filamento"
# MSG_FILAMENT_LOADED c=20 r=2
2021-04-29 13:41:47 +00:00
#: messages.c:38
2021-01-26 10:08:57 +00:00
msgid "Is filament loaded?"
msgstr "Esta el filamento cargado?"
# MSG_STEEL_SHEET_CHECK c=20 r=2
2021-04-29 13:41:47 +00:00
#: messages.c:109
2021-01-26 10:08:57 +00:00
msgid "Is steel sheet on heatbed?"
2021-04-29 13:41:47 +00:00
msgstr "Esta coloc.la lamina sobre la base?"
2021-01-26 10:08:57 +00:00
# MSG_LAST_PRINT_FAILURES c=20
2021-04-29 13:41:47 +00:00
#: messages.c:57
2021-01-26 10:08:57 +00:00
msgid "Last print failures"
msgstr "Ultimos imp. fallos"
2021-04-29 13:41:47 +00:00
# MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
#: messages.c:122
msgid "Hi, I am your Original Prusa i3 printer. I will guide you through a short setup process, in which the Z-axis will be calibrated. Then, you will be ready to print."
msgstr "Hola, soy tu impresora Original Prusa i3. Te guiare a traves de un breve proceso de configuracion, en el que se calibrara el eje Z. Despues, estaras listo para imprimir."
# MSG_ADDITIONAL_SHEETS c=20 r=9
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5029
2021-01-26 10:08:57 +00:00
msgid "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."
msgstr "Si tienes planchas de acero adicionales, calibra sus ajustes en Ajustes - Ajustes HW - Planchas acero."
# MSG_LAST_PRINT c=18
2021-04-29 13:41:47 +00:00
#: messages.c:56
2021-01-26 10:08:57 +00:00
msgid "Last print"
msgstr "Ultima impresion"
# MSG_SELFTEST_EXTRUDER_FAN c=20
2021-04-29 13:41:47 +00:00
#: messages.c:89
2021-01-26 10:08:57 +00:00
msgid "Left hotend fan?"
msgstr "Vent. izquierdo?"
2021-04-29 13:41:47 +00:00
# MSG_LEFT c=10
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2844
2021-01-26 10:08:57 +00:00
msgid "Left"
msgstr "Izquierda"
2021-04-29 13:41:47 +00:00
# MSG_BED_CORRECTION_LEFT c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3114
2021-01-26 10:08:57 +00:00
msgid "Left side [um]"
msgstr "Izquierda [um]"
2021-04-29 13:41:47 +00:00
# MSG_LIN_CORRECTION c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5702
2021-01-26 10:08:57 +00:00
msgid "Lin. correction"
2021-04-29 13:41:47 +00:00
msgstr "Correc. Linealidad"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_BABYSTEP_Z c=18
2021-01-26 10:08:57 +00:00
#: messages.c:12
msgid "Live adjust Z"
msgstr "Micropaso Eje Z"
2021-04-29 13:41:47 +00:00
# MSG_INSERT_FIL c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7380
2021-01-26 10:08:57 +00:00
msgid "Insert the filament (do not load it) into the extruder and then press the knob."
msgstr "Inserte el filamento (no lo cargue) en el extrusor y luego presione el dial."
# MSG_LOAD_FILAMENT c=17
2021-04-29 13:41:47 +00:00
#: messages.c:58
2021-01-26 10:08:57 +00:00
msgid "Load filament"
msgstr "Introducir filam."
2021-04-29 13:41:47 +00:00
# MSG_LOADING_COLOR c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2516
2021-01-26 10:08:57 +00:00
msgid "Loading color"
msgstr "Cambiando color"
# MSG_LOADING_FILAMENT c=20
2021-04-29 13:41:47 +00:00
#: messages.c:59
2021-01-26 10:08:57 +00:00
msgid "Loading filament"
msgstr "Introduciendo filam."
2021-04-29 13:41:47 +00:00
# MSG_ITERATION c=12
#: messages.c:53
msgid "Iteration"
msgstr "Iteracion"
# MSG_LOOSE_PULLEY c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8167
2021-01-26 10:08:57 +00:00
msgid "Loose pulley"
msgstr "Polea suelta"
2021-04-29 13:41:47 +00:00
# MSG_LOAD_TO_NOZZLE c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6717
2021-01-26 10:08:57 +00:00
msgid "Load to nozzle"
2021-04-29 13:41:47 +00:00
msgstr "Cargar a boquilla"
2021-01-26 10:08:57 +00:00
# MSG_M117_V2_CALIBRATION c=25
2021-04-29 13:41:47 +00:00
#: messages.c:62
2021-01-26 10:08:57 +00:00
msgid "M117 First layer cal."
msgstr "M117 Cal. primera cap."
2021-04-29 13:41:47 +00:00
# MSG_MAIN c=18
#: messages.c:63
2021-01-26 10:08:57 +00:00
msgid "Main"
msgstr "Menu principal"
# MSG_BL_HIGH c=12
#: messages.c:155
msgid "Level Bright"
msgstr "Valor brill."
# MSG_BL_LOW c=12
#: messages.c:156
msgid "Level Dimmed"
2021-04-29 13:41:47 +00:00
msgstr "Valor oscuro"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
#: messages.c:67
2021-01-26 10:08:57 +00:00
msgid "Measuring reference height of calibration point"
msgstr "Midiendo altura del punto de calibracion"
# MSG_MESH_BED_LEVELING c=18
#: messages.c:148
msgid "Mesh Bed Leveling"
msgstr "Nivela. Mesh Level"
# MSG_MMU_OK_RESUMING_POSITION c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:765
2021-01-26 10:08:57 +00:00
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Restaurando posicion..."
# MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:758
2021-01-26 10:08:57 +00:00
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Restaurando temperatura..."
2021-04-29 13:41:47 +00:00
# MSG_MEASURED_SKEW c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2885
2021-01-26 10:08:57 +00:00
msgid "Measured skew"
2021-04-29 13:41:47 +00:00
msgstr "No a escuadra"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_MMU_FAILS c=15
#: messages.c:69
2021-01-26 10:08:57 +00:00
msgid "MMU fails"
msgstr "Fallos MMU"
2021-04-29 13:41:47 +00:00
# MSG_MMU_LOAD_FAILED c=20
2021-12-16 10:52:35 +00:00
#: mmu.cpp:1587
2021-04-29 13:41:47 +00:00
msgid "MMU load failed"
2021-01-26 10:08:57 +00:00
msgstr "Carga MMU fallida"
2021-04-29 13:41:47 +00:00
# MSG_MMU_LOAD_FAILS c=15
#: messages.c:70
2021-01-26 10:08:57 +00:00
msgid "MMU load fails"
msgstr "Carga MMU falla"
# MSG_MMU_OK_RESUMING c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:776
2021-01-26 10:08:57 +00:00
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Resumiendo..."
2021-04-29 13:41:47 +00:00
# MSG_MODE c=6
#: messages.c:103
2021-01-26 10:08:57 +00:00
msgid "Mode"
msgstr "Modo"
2021-04-29 13:41:47 +00:00
# MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:882
2021-01-26 10:08:57 +00:00
msgid "MK3 firmware detected on MK3S printer"
msgstr "Firmware MK3 detectado en impresora MK3S"
2021-04-29 13:41:47 +00:00
# MSG_NORMAL c=7
#: messages.c:107
2021-01-26 10:08:57 +00:00
msgid "Normal"
msgstr ""
2021-04-29 13:41:47 +00:00
# MSG_SILENT c=7
#: messages.c:106
2021-01-26 10:08:57 +00:00
msgid "Silent"
2021-04-29 13:41:47 +00:00
msgstr "Acallar"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_MMU_USER_ATTENTION c=20 r=3
2021-12-16 10:52:35 +00:00
#: mmu.cpp:722
2021-01-26 10:08:57 +00:00
msgid "MMU needs user attention."
msgstr "MMU necesita atencion del usuario."
2021-04-29 13:41:47 +00:00
# MSG_MMU_POWER_FAILS c=15
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1517
2021-01-26 10:08:57 +00:00
msgid "MMU power fails"
2021-04-29 13:41:47 +00:00
msgstr "Fallo red MMU"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_STEALTH c=7
#: messages.c:108
2021-01-26 10:08:57 +00:00
msgid "Stealth"
2021-04-29 13:41:47 +00:00
msgstr "Sigilo"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_AUTO_POWER c=10
#: messages.c:105
2021-01-26 10:08:57 +00:00
msgid "Auto power"
2021-04-29 13:41:47 +00:00
msgstr "Encendido"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_HIGH_POWER c=10
#: messages.c:104
2021-01-26 10:08:57 +00:00
msgid "High power"
msgstr "Rend.pleno"
2021-04-29 13:41:47 +00:00
# MSG_MMU_CONNECTED c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1997
2021-01-26 10:08:57 +00:00
msgid "MMU2 connected"
msgstr "MMU2 conectado"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_MOTOR c=18
#: messages.c:96
2021-01-26 10:08:57 +00:00
msgid "Motor"
msgstr ""
2021-04-29 13:41:47 +00:00
# MSG_MOVE_AXIS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5677
2021-01-26 10:08:57 +00:00
msgid "Move axis"
msgstr "Mover ejes"
2021-04-29 13:41:47 +00:00
# MSG_MOVE_X c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4233
2021-01-26 10:08:57 +00:00
msgid "Move X"
msgstr "Mover X"
2021-04-29 13:41:47 +00:00
# MSG_MOVE_Y c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4234
2021-01-26 10:08:57 +00:00
msgid "Move Y"
msgstr "Mover Y"
2021-04-29 13:41:47 +00:00
# MSG_MOVE_Z c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4235
2021-01-26 10:08:57 +00:00
msgid "Move Z"
msgstr "Mover Z"
2021-04-29 13:41:47 +00:00
# MSG_NO_MOVE c=20
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:5852
2021-01-26 10:08:57 +00:00
msgid "No move."
msgstr "Sin movimiento"
2021-04-29 13:41:47 +00:00
# MSG_NO_CARD c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6697
2021-01-26 10:08:57 +00:00
msgid "No SD card"
msgstr "No hay tarjeta SD"
2021-04-29 13:41:47 +00:00
# MSG_NA c=3
#: messages.c:127
2021-01-26 10:08:57 +00:00
msgid "N/A"
2021-04-29 13:41:47 +00:00
msgstr "N/D"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_NO c=4
#: messages.c:71
2021-01-26 10:08:57 +00:00
msgid "No"
msgstr ""
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_NOTCONNECTED c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8128
2021-01-26 10:08:57 +00:00
msgid "Not connected"
2021-04-29 13:41:47 +00:00
msgstr "No hay conexion"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
2021-12-16 10:52:35 +00:00
#: util.cpp:195
2021-01-26 10:08:57 +00:00
msgid "New firmware version available:"
msgstr "Nuevo firmware disponible:"
# MSG_SELFTEST_FAN_NO c=19
2021-04-29 13:41:47 +00:00
#: messages.c:92
2021-01-26 10:08:57 +00:00
msgid "Not spinning"
msgstr "Ventilador no gira"
# MSG_WIZARD_V2_CAL c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4838
2021-01-26 10:08:57 +00:00
msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr "Voy a calibrar la distancia entre la punta de la boquilla y la superficie de la base."
# MSG_WIZARD_WILL_PREHEAT c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4967
2021-01-26 10:08:57 +00:00
msgid "Now I will preheat nozzle for PLA."
msgstr "Ahora precalentare la boquilla para PLA."
2021-04-29 13:41:47 +00:00
# MSG_NOZZLE c=12
#: messages.c:72
2021-01-26 10:08:57 +00:00
msgid "Nozzle"
msgstr "Boquilla"
2021-04-29 13:41:47 +00:00
# MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:1605
2021-01-26 10:08:57 +00:00
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"
2021-04-29 13:41:47 +00:00
# MSG_REMOVE_TEST_PRINT c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4958
2021-01-26 10:08:57 +00:00
msgid "Now remove the test print from steel sheet."
msgstr "Ahora retira la prueba de la lamina de acero."
2021-04-29 13:41:47 +00:00
# MSG_NOZZLE_FAN c=10
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1446
2021-01-26 10:08:57 +00:00
msgid "Nozzle FAN"
msgstr "Vent. capa"
2021-04-29 13:41:47 +00:00
# MSG_PAUSE_PRINT c=18
#: messages.c:74
2021-01-26 10:08:57 +00:00
msgid "Pause print"
msgstr "Pausar impresion"
2021-04-29 13:41:47 +00:00
# MSG_PID_RUNNING c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1327
2021-04-29 13:41:47 +00:00
msgid "PID cal."
msgstr "Cal. PID"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_PID_FINISHED c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1333
2021-01-26 10:08:57 +00:00
msgid "PID cal. finished"
msgstr "Cal. PID terminada"
2021-04-29 13:41:47 +00:00
# MSG_PID_EXTRUDER c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5799
2021-01-26 10:08:57 +00:00
msgid "PID calibration"
msgstr "Calibracion PID"
2021-04-29 13:41:47 +00:00
# MSG_PINDA_PREHEAT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:683
2021-01-26 10:08:57 +00:00
msgid "PINDA Heating"
msgstr "Calentando PINDA"
# MSG_PAPER c=20 r=10
2021-04-29 13:41:47 +00:00
#: messages.c:73
2021-01-26 10:08:57 +00:00
msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
msgstr "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
# MSG_WIZARD_CLEAN_HEATBED c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5024
2021-01-26 10:08:57 +00:00
msgid "Please clean heatbed and then press the knob."
2021-04-29 13:41:47 +00:00
msgstr "Limpia la superficie de la base, por favor, y luego presione el dial."
2021-01-26 10:08:57 +00:00
# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
2021-04-29 13:41:47 +00:00
#: messages.c:26
2021-01-26 10:08:57 +00:00
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Limpia boquilla para calibracion. Click cuando acabes."
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_PLEASECHECK c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8122
2021-04-29 13:41:47 +00:00
msgid "Please check:"
msgstr "Controla:"
2021-01-26 10:08:57 +00:00
# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
2021-04-29 13:41:47 +00:00
#: messages.c:117
2021-01-26 10:08:57 +00:00
msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
msgstr "Lee el manual y resuelve el problema. Despues, reinicia la impresora y continua con el Wizard"
2021-04-29 13:41:47 +00:00
# MSG_CHECK_IDLER c=20 r=5
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:3798
2021-01-26 10:08:57 +00:00
msgid "Please open idler and remove filament manually."
msgstr "Por favor abate el rodillo de empuje (idler) y retira el filamento manualmente."
2021-04-29 13:41:47 +00:00
# MSG_PLACE_STEEL_SHEET c=20 r=5
#: messages.c:75
2021-01-26 10:08:57 +00:00
msgid "Please place steel sheet on heatbed."
msgstr "Por favor coloca la chapa de acero en la base calefactable."
# MSG_PRESS_TO_UNLOAD c=20 r=4
2021-04-29 13:41:47 +00:00
#: messages.c:79
2021-01-26 10:08:57 +00:00
msgid "Please press the knob to unload filament"
msgstr "Por favor, pulsa el dial para descargar el filamento"
# MSG_PULL_OUT_FILAMENT c=20 r=4
2021-04-29 13:41:47 +00:00
#: messages.c:81
2021-01-26 10:08:57 +00:00
msgid "Please pull out filament immediately"
msgstr "Por favor retire el filamento de inmediato"
# MSG_EJECT_REMOVE c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:1421
2021-01-26 10:08:57 +00:00
msgid "Please remove filament and then press the knob."
msgstr "Por favor quite el filamento y luego presione el dial."
# MSG_REMOVE_STEEL_SHEET c=20 r=4
2021-04-29 13:41:47 +00:00
#: messages.c:84
2021-01-26 10:08:57 +00:00
msgid "Please remove steel sheet from heatbed."
msgstr "Por favor retire la chapa de acero de la base calefactable."
# MSG_RUN_XYZ c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:5338
2021-01-26 10:08:57 +00:00
msgid "Please run XYZ calibration first."
msgstr "Por favor realiza la calibracion XYZ primero."
# MSG_UPDATE_MMU2_FW c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:1341
2021-01-26 10:08:57 +00:00
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Por favor actualice el firmware en tu MMU2. Esperando el reseteo."
# MSG_PLEASE_WAIT c=20
2021-04-29 13:41:47 +00:00
#: messages.c:76
2021-01-26 10:08:57 +00:00
msgid "Please wait"
msgstr "Por Favor Espere"
2021-04-29 13:41:47 +00:00
# MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4957
2021-01-26 10:08:57 +00:00
msgid "Please remove shipping helpers first."
msgstr "Por favor retira los soportes de envio primero."
# MSG_PREHEAT_NOZZLE c=20
2021-04-29 13:41:47 +00:00
#: messages.c:78
2021-01-26 10:08:57 +00:00
msgid "Preheat the nozzle!"
msgstr "Precalienta extrusor"
2021-04-29 13:41:47 +00:00
# MSG_PREHEAT c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6655
2021-01-26 10:08:57 +00:00
msgid "Preheat"
msgstr "Precalentar"
# MSG_WIZARD_HEATING c=20 r=3
2021-04-29 13:41:47 +00:00
#: messages.c:119
2021-01-26 10:08:57 +00:00
msgid "Preheating nozzle. Please wait."
msgstr "Precalentando nozzle. Espera por favor."
2021-04-29 13:41:47 +00:00
# MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
2021-12-16 10:52:35 +00:00
#: util.cpp:199
2021-01-26 10:08:57 +00:00
msgid "Please upgrade."
msgstr "Actualize por favor"
# MSG_PRESS_TO_PREHEAT c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:12049
2021-04-29 13:41:47 +00:00
msgid "Press the knob to preheat nozzle and continue."
2021-01-26 10:08:57 +00:00
msgstr "Pulsa el dial para precalentar la boquilla y continue."
# MSG_FS_PAUSE c=5
2021-04-29 13:41:47 +00:00
#: fsensor.cpp:730
2021-01-26 10:08:57 +00:00
msgid "Pause"
msgstr "Pausa"
2021-04-29 13:41:47 +00:00
# MSG_POWER_FAILURES c=15
#: messages.c:77
2021-01-26 10:08:57 +00:00
msgid "Power failures"
2021-04-29 13:41:47 +00:00
msgstr "Fallas energia"
2021-01-26 10:08:57 +00:00
# MSG_PRINT_ABORTED c=20
2021-04-29 13:41:47 +00:00
#: messages.c:80
2021-01-26 10:08:57 +00:00
msgid "Print aborted"
msgstr "Impresion cancelada"
2021-04-29 13:41:47 +00:00
# MSG_PREHEATING_TO_LOAD c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2297
2021-01-26 10:08:57 +00:00
msgid "Preheating to load"
msgstr "Precalent. cargar"
2021-04-29 13:41:47 +00:00
# MSG_PREHEATING_TO_UNLOAD c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2302
2021-01-26 10:08:57 +00:00
msgid "Preheating to unload"
msgstr "Precalent. descargar"
# MSG_SELFTEST_PRINT_FAN_SPEED c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8501
2021-01-26 10:08:57 +00:00
msgid "Print fan:"
msgstr "Vent.fusor:"
2021-04-29 13:41:47 +00:00
# MSG_CARD_MENU c=18
#: messages.c:22
2021-01-26 10:08:57 +00:00
msgid "Print from SD"
msgstr "Menu tarjeta SD"
2021-04-29 13:41:47 +00:00
# MSG_PRESS_KNOB c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2130
2021-01-26 10:08:57 +00:00
msgid "Press the knob"
msgstr "Pulsa el dial"
2021-04-29 13:41:47 +00:00
# MSG_PRINT_PAUSED c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:907
2021-01-26 10:08:57 +00:00
msgid "Print paused"
msgstr "Impresion en pausa"
2021-04-29 13:41:47 +00:00
# MSG_RESUME_NOZZLE_TEMP c=20 r=4
2021-12-16 10:52:35 +00:00
#: mmu.cpp:726
2021-01-26 10:08:57 +00:00
msgid "Press the knob to resume nozzle temperature."
2021-04-29 13:41:47 +00:00
msgstr "Presione el dial para continuar con la temperatura de la boquilla."
2021-01-26 10:08:57 +00:00
# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
2021-04-29 13:41:47 +00:00
#: messages.c:46
2021-01-26 10:08:57 +00:00
msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
msgstr "Impresora no esta calibrada todavia. Por favor usa el manual capitulo Primeros pasos Calibracion flujo."
2021-04-29 13:41:47 +00:00
# MSG_PRINT_FAN c=10
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1447
2021-01-26 10:08:57 +00:00
msgid "Print FAN"
msgstr "Vent. extr"
2021-04-29 13:41:47 +00:00
# MSG_WIZARD_LOAD_FILAMENT c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4818
2021-01-26 10:08:57 +00:00
msgid "Please insert filament into the extruder, then press the knob to load it."
msgstr "Por favor, coloca el filamento en el extrusor, luego presiona el dial para cargarlo."
2021-04-29 13:41:47 +00:00
# MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4813
2021-01-26 10:08:57 +00:00
msgid "Please insert filament into the first tube of the MMU, then press the knob to load it."
msgstr "Por favor, coloca el filamento en el primer tubo de la MMU, luego pulsa el dial para cargarlo."
2021-04-29 13:41:47 +00:00
# MSG_PLEASE_LOAD_PLA c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4735
2021-01-26 10:08:57 +00:00
msgid "Please load filament first."
2021-04-29 13:41:47 +00:00
msgstr "Por favor, cargar primero el filamento."
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_BED_CORRECTION_REAR c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3117
2021-01-26 10:08:57 +00:00
msgid "Rear side [um]"
msgstr "Trasera [um]"
2021-04-29 13:41:47 +00:00
# MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7404
2021-01-26 10:08:57 +00:00
msgid "Please unload the filament first, then repeat this action."
msgstr "Primero descargue el filamento, luego repita esta accion."
2021-04-29 13:41:47 +00:00
# MSG_CHECK_IR_CONNECTION c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7407
2021-01-26 10:08:57 +00:00
msgid "Please check the IR sensor connection, unload filament if present."
msgstr "Por favor comprueba la conexion del IR sensor y filamento esta descargado."
# MSG_RECOVERING_PRINT c=20
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:11393
2021-04-29 13:41:47 +00:00
msgid "Recovering print"
msgstr "Recuper. impresion"
2021-01-26 10:08:57 +00:00
# MSG_REMOVE_OLD_FILAMENT c=20 r=5
2021-12-16 10:52:35 +00:00
#: mmu.cpp:833
2021-01-26 10:08:57 +00:00
msgid "Remove old filament and press the knob to start loading new filament."
msgstr "Retire el filamento viejo y presione el dial para comenzar a cargar el nuevo filamento."
2021-04-29 13:41:47 +00:00
# MSG_CALIBRATE_BED_RESET c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5804
2021-01-26 10:08:57 +00:00
msgid "Reset XYZ calibr."
msgstr ""
# MSG_RESET c=14
2021-04-29 13:41:47 +00:00
#: messages.c:85
2021-01-26 10:08:57 +00:00
msgid "Reset"
msgstr ""
# MSG_RESUME_PRINT c=18
2021-04-29 13:41:47 +00:00
#: messages.c:86
2021-01-26 10:08:57 +00:00
msgid "Resume print"
msgstr "Reanudar impres."
# MSG_RESUMING_PRINT c=20
2021-04-29 13:41:47 +00:00
#: messages.c:87
2021-01-26 10:08:57 +00:00
msgid "Resuming print"
msgstr "Continuan. impresion"
2021-04-29 13:41:47 +00:00
# MSG_BED_CORRECTION_RIGHT c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3115
2021-01-26 10:08:57 +00:00
msgid "Right side[um]"
msgstr "Derecha [um]"
2021-04-29 13:41:47 +00:00
# MSG_RPI_PORT c=13
2021-01-26 10:08:57 +00:00
#: messages.c:142
msgid "RPi port"
msgstr "Puerto RPi"
# MSG_WIZARD_RERUN c=20 r=7
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4756
2021-01-26 10:08:57 +00:00
msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?"
msgstr "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"
2021-04-29 13:41:47 +00:00
# MSG_SD_CARD c=8
#: messages.c:138
2021-01-26 10:08:57 +00:00
msgid "SD card"
msgstr "Tarj. SD"
2021-04-29 13:41:47 +00:00
# MSG_RIGHT c=10
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2845
2021-01-26 10:08:57 +00:00
msgid "Right"
msgstr "Derecha"
2021-04-29 13:41:47 +00:00
# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
#: messages.c:44
2021-01-26 10:08:57 +00:00
msgid "Searching bed calibration point"
msgstr "Buscando punto de calibracion base"
2021-04-29 13:41:47 +00:00
# MSG_LANGUAGE_SELECT c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4451
2021-01-26 10:08:57 +00:00
msgid "Select language"
msgstr "Cambiar el idioma"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_OK c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7679
2021-01-26 10:08:57 +00:00
msgid "Self test OK"
msgstr ""
# MSG_SELFTEST_START c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7447
2021-04-29 13:41:47 +00:00
msgid "Self test start"
2021-01-26 10:08:57 +00:00
msgstr "Iniciar Selftest"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5780
2021-04-29 13:41:47 +00:00
msgid "Selftest"
2021-01-26 10:08:57 +00:00
msgstr ""
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_ERROR c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8121
2021-04-29 13:41:47 +00:00
msgid "Selftest error!"
msgstr "Error Selftest!"
2021-01-26 10:08:57 +00:00
# MSG_SELFTEST_FAILED c=20
2021-04-29 13:41:47 +00:00
#: messages.c:90
msgid "Selftest failed"
2021-01-26 10:08:57 +00:00
msgstr "Fallo Selftest"
# MSG_FORCE_SELFTEST c=20 r=8
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:1637
2021-01-26 10:08:57 +00:00
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr "Se realizara el auto-test para calibrar con precision la vuelta a la posicion inicial sin sensores."
2021-04-29 13:41:47 +00:00
# MSG_SEL_PREHEAT_TEMP c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4998
2021-01-26 10:08:57 +00:00
msgid "Select nozzle preheat temperature which matches your material."
2021-04-29 13:41:47 +00:00
msgstr "Selecciona la temperatura para precalentar la boquilla que se ajuste a tu material."
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_SET_TEMPERATURE c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3135
2021-01-26 10:08:57 +00:00
msgid "Set temperature:"
msgstr "Establecer temp.:"
2021-04-29 13:41:47 +00:00
# MSG_SETTINGS c=18
#: messages.c:99
2021-01-26 10:08:57 +00:00
msgid "Settings"
msgstr "Configuracion"
# MSG_SHOW_END_STOPS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5801
2021-01-26 10:08:57 +00:00
msgid "Show end stops"
msgstr "Mostrar endstops"
# MSG_FILE_CNT c=20 r=6
2021-12-16 10:52:35 +00:00
#: cardreader.cpp:817
2021-01-26 10:08:57 +00:00
msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
2021-04-29 13:41:47 +00:00
msgstr "Algunos archivos no se ordenaran. Maximo 100 archivos por carpeta para ordenar."
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_SORT c=7
2021-01-26 10:08:57 +00:00
#: messages.c:139
msgid "Sort"
msgstr "Ordenar"
2021-04-29 13:41:47 +00:00
# MSG_NONE c=8
#: messages.c:129
2021-01-26 10:08:57 +00:00
msgid "None"
msgstr "Ninguno"
2021-04-29 13:41:47 +00:00
# MSG_SORT_TIME c=8
2021-01-26 10:08:57 +00:00
#: messages.c:140
msgid "Time"
msgstr "Fecha"
2021-04-29 13:41:47 +00:00
# MSG_SEVERE_SKEW c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2888
2021-04-29 13:41:47 +00:00
msgid "Severe skew"
msgstr "Severo sesgar"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_SORT_ALPHA c=8
2021-01-26 10:08:57 +00:00
#: messages.c:141
msgid "Alphabet"
msgstr "Alfabet"
2021-04-29 13:41:47 +00:00
# MSG_SORTING c=20
2021-12-16 10:52:35 +00:00
#: cardreader.cpp:880
2021-01-26 10:08:57 +00:00
msgid "Sorting files"
msgstr "Ordenando archivos"
2021-04-29 13:41:47 +00:00
# MSG_SOUND_LOUD c=7
2021-01-26 10:08:57 +00:00
#: messages.c:144
msgid "Loud"
msgstr "Alto"
2021-04-29 13:41:47 +00:00
# MSG_SLIGHT_SKEW c=14
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2887
2021-04-29 13:41:47 +00:00
msgid "Slight skew"
msgstr "Ligera sesgar"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_SOUND c=7
2021-01-26 10:08:57 +00:00
#: messages.c:143
msgid "Sound"
msgstr "Sonido"
2021-04-29 13:41:47 +00:00
# MSG_RUNOUTS c=7
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:1593
2021-01-26 10:08:57 +00:00
msgid "Runouts"
2021-04-29 13:41:47 +00:00
msgstr "Falla"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_Z-LEVELING_ENFORCED c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:3303
2021-01-26 10:08:57 +00:00
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Problema encontrado, nivelacion Z forzosa ..."
2021-04-29 13:41:47 +00:00
# MSG_SOUND_ONCE c=7
2021-01-26 10:08:57 +00:00
#: messages.c:145
msgid "Once"
msgstr "Una vez"
2021-04-29 13:41:47 +00:00
# MSG_SPEED c=15
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6882
2021-01-26 10:08:57 +00:00
msgid "Speed"
msgstr "Velocidad"
# MSG_SELFTEST_FAN_YES c=19
2021-04-29 13:41:47 +00:00
#: messages.c:93
2021-01-26 10:08:57 +00:00
msgid "Spinning"
msgstr "Ventilador girando"
# MSG_TEMP_CAL_WARNING c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:5351
2021-01-26 10:08:57 +00:00
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr "Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido."
2021-04-29 13:41:47 +00:00
# MSG_STATISTICS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6081
2021-04-29 13:41:47 +00:00
msgid "Statistics"
msgstr "Estadisticas"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_STOP_PRINT c=18
#: messages.c:110
2021-01-26 10:08:57 +00:00
msgid "Stop print"
msgstr "Detener impresion"
2021-04-29 13:41:47 +00:00
# MSG_STOPPED c=20
#: messages.c:111
msgid "STOPPED."
2021-01-26 10:08:57 +00:00
msgstr "PARADA"
2021-04-29 13:41:47 +00:00
# MSG_SUPPORT c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6756
2021-01-26 10:08:57 +00:00
msgid "Support"
msgstr "Soporte"
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_SWAPPED c=16
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8180
2021-01-26 10:08:57 +00:00
msgid "Swapped"
msgstr "Intercambiado"
2021-04-29 13:41:47 +00:00
# MSG_SELECT_FILAMENT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4706
2021-01-26 10:08:57 +00:00
msgid "Select filament:"
2021-04-29 13:41:47 +00:00
msgstr "Selecciona filam.:"
2021-01-26 10:08:57 +00:00
# MSG_TEMP_CALIBRATION c=14
2021-04-29 13:41:47 +00:00
#: messages.c:112
2021-01-26 10:08:57 +00:00
msgid "Temp. cal."
msgstr "Cal. temp."
2021-04-29 13:41:47 +00:00
# MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4847
2021-01-26 10:08:57 +00:00
msgid "Select temperature which matches your material."
msgstr "Selecciona la temperatura adecuada a tu material."
2021-04-29 13:41:47 +00:00
# MSG_CALIBRATION_PINDA_MENU c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5812
2021-01-26 10:08:57 +00:00
msgid "Temp. calibration"
msgstr "Calibracion temp."
# MSG_TEMP_CAL_FAILED c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3771
2021-01-26 10:08:57 +00:00
msgid "Temperature calibration failed"
msgstr "Fallo de la calibracion de temperatura"
# MSG_TEMP_CALIBRATION_DONE c=20 r=12
2021-04-29 13:41:47 +00:00
#: messages.c:113
2021-01-26 10:08:57 +00:00
msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
msgstr "Calibracion temperatura terminada. Haz clic para continuar."
2021-04-29 13:41:47 +00:00
# MSG_FS_VERIFIED c=20 r=3
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7411
2021-01-26 10:08:57 +00:00
msgid "Sensor verified, remove the filament now."
msgstr "Sensor verificado, retire el filamento ahora."
2021-04-29 13:41:47 +00:00
# MSG_TEMPERATURE c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5673
2021-01-26 10:08:57 +00:00
msgid "Temperature"
msgstr "Temperatura"
2021-04-29 13:41:47 +00:00
# MSG_MENU_TEMPERATURES c=15
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2047
2021-01-26 10:08:57 +00:00
msgid "Temperatures"
msgstr "Temperaturas"
# MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
2021-04-29 13:41:47 +00:00
#: messages.c:47
2021-01-26 10:08:57 +00:00
msgid "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
msgstr "Todavia es necesario hacer una calibracion Z. Por favor siga el manual, capitulo Primeros pasos, seccion Calibracion del flujo."
2021-04-29 13:41:47 +00:00
# MSG_TOTAL_FILAMENT c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2735
2021-01-26 10:08:57 +00:00
msgid "Total filament"
msgstr "Filamento total"
2021-04-29 13:41:47 +00:00
# MSG_TOTAL_PRINT_TIME c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2736
2021-01-26 10:08:57 +00:00
msgid "Total print time"
msgstr "Tiempo total"
2021-04-29 13:41:47 +00:00
# MSG_TUNE c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6653
2021-01-26 10:08:57 +00:00
msgid "Tune"
msgstr "Ajustar"
# MSG_TOTAL_FAILURES c=20
2021-04-29 13:41:47 +00:00
#: messages.c:101
2021-01-26 10:08:57 +00:00
msgid "Total failures"
msgstr "Fallos totales"
2021-04-29 13:41:47 +00:00
# MSG_TO_LOAD_FIL c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2137
2021-01-26 10:08:57 +00:00
msgid "to load filament"
2021-04-29 13:41:47 +00:00
msgstr "para cargar el fil."
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_TO_UNLOAD_FIL c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2141
2021-01-26 10:08:57 +00:00
msgid "to unload filament"
2021-04-29 13:41:47 +00:00
msgstr "para descargar fil."
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_UNLOAD_FILAMENT c=16
#: messages.c:114
2021-01-26 10:08:57 +00:00
msgid "Unload filament"
msgstr "Soltar filamento"
2021-04-29 13:41:47 +00:00
# MSG_UNLOADING_FILAMENT c=20
#: messages.c:115
2021-01-26 10:08:57 +00:00
msgid "Unloading filament"
msgstr "Soltando filamento"
# MSG_TOTAL c=6
2021-04-29 13:41:47 +00:00
#: messages.c:100
2021-01-26 10:08:57 +00:00
msgid "Total"
msgstr ""
2021-04-29 13:41:47 +00:00
# MSG_USED c=19
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5928
2021-01-26 10:08:57 +00:00
msgid "Used during print"
msgstr "Usado en impresion"
2021-04-29 13:41:47 +00:00
# MSG_MENU_VOLTAGES c=15
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2050
2021-01-26 10:08:57 +00:00
msgid "Voltages"
msgstr "Voltajes"
2021-04-29 13:41:47 +00:00
# MSG_UNKNOWN c=13
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2005
2021-01-26 10:08:57 +00:00
msgid "unknown"
msgstr "desconocido"
2021-04-29 13:41:47 +00:00
# MSG_USERWAIT c=20
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:4347
2021-01-26 10:08:57 +00:00
msgid "Wait for user..."
2021-04-29 13:41:47 +00:00
msgstr "Esperando ordenes..."
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_WAITING_TEMP c=20 r=4
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3283
2021-01-26 10:08:57 +00:00
msgid "Waiting for nozzle and bed cooling"
msgstr "Esperando enfriamiento de la base y extrusor."
# MSG_WAITING_TEMP_PINDA c=20 r=3
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3244
2021-01-26 10:08:57 +00:00
msgid "Waiting for PINDA probe cooling"
msgstr "Esperando a que se enfrie la sonda PINDA"
# MSG_CHANGED_BOTH c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:1597
2021-01-26 10:08:57 +00:00
msgid "Warning: both printer type and motherboard type changed."
msgstr "Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado."
# MSG_CHANGED_MOTHERBOARD c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:1589
2021-01-26 10:08:57 +00:00
msgid "Warning: motherboard type changed."
msgstr "Cuidado: el tipo de placa ha cambiado."
# MSG_CHANGED_PRINTER c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:1593
2021-01-26 10:08:57 +00:00
msgid "Warning: printer type changed."
msgstr "Cuidado: Ha cambiado el tipo de impresora."
# MSG_UNLOAD_SUCCESSFUL c=20 r=2
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:3789
2021-01-26 10:08:57 +00:00
msgid "Was filament unload successful?"
2021-06-21 10:42:56 +00:00
msgstr "Se descargo con exito el filamento?"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_WIRINGERROR c=18
#: messages.c:98
2021-01-26 10:08:57 +00:00
msgid "Wiring error"
msgstr "Error de conexion"
2021-04-29 13:41:47 +00:00
# MSG_WIZARD c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5771
2021-01-26 10:08:57 +00:00
msgid "Wizard"
msgstr ""
# MSG_XYZ_DETAILS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2039
2021-01-26 10:08:57 +00:00
msgid "XYZ cal. details"
msgstr "Detalles cal. XYZ"
# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: messages.c:18
msgid "XYZ calibration failed. Please consult the manual."
msgstr "Calibracion XYZ fallada. Consulta el manual por favor."
2021-04-29 13:41:47 +00:00
# MSG_YES c=3
#: messages.c:123
2021-01-26 10:08:57 +00:00
msgid "Yes"
msgstr "Si"
# MSG_WIZARD_QUIT c=20 r=8
2021-04-29 13:41:47 +00:00
#: messages.c:120
2021-01-26 10:08:57 +00:00
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr "Siempre puedes acceder al asistente desde Calibracion -> Wizard"
# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3743
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."
# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3740
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
# MSG_TIMEOUT c=12
#: messages.c:157
msgid "Timeout"
msgstr "Expirar"
# MSG_X_CORRECTION c=13
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5086
2021-01-26 10:08:57 +00:00
msgid "X-correct:"
msgstr "Corregir-X:"
# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3737
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3721
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."
# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3724
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration compromised. Right front calibration point not reachable."
msgstr "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
# MSG_LOAD_ALL c=17
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6167
2021-01-26 10:08:57 +00:00
msgid "Load all"
msgstr "Intr. todos fil."
2021-04-29 13:41:47 +00:00
# MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3703
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."
2021-04-29 13:41:47 +00:00
# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3709
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr "Calibracion XYZ fallada. Puntos frontales no alcanzables."
2021-04-29 13:41:47 +00:00
# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:3712
2021-01-26 10:08:57 +00:00
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
2021-04-29 13:41:47 +00:00
# MSG_Y_DIST_FROM_MIN c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2842
2021-01-26 10:08:57 +00:00
msgid "Y distance from min"
2021-04-29 13:41:47 +00:00
msgstr "Dist. en Y desde min"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_WIZARD_V2_CAL_2 c=20 r=12
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4850
2021-01-26 10:08:57 +00:00
msgid "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
msgstr "La impresora comenzara a imprimir una linea en zig-zag. Gira el dial hasta que la linea alcance la altura optima. Mira las fotos del manual (Capitulo de calibracion)."
2021-12-21 13:31:04 +00:00
# MSG_FIL_FAILED c=20 r=5
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:7415
2021-01-26 10:08:57 +00:00
msgid "Verification failed, remove the filament and try again."
msgstr "La verificacion fallo, retire el filamento e intente nuevamente."
# MSG_Y_CORRECTION c=13
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5087
2021-01-26 10:08:57 +00:00
msgid "Y-correct:"
msgstr "Corregir-Y:"
2021-04-29 13:41:47 +00:00
# MSG_OFF c=3
#: messages.c:125
2021-01-26 10:08:57 +00:00
msgid "Off"
msgstr "Ina"
2021-04-29 13:41:47 +00:00
# MSG_ON c=3
#: messages.c:126
2021-01-26 10:08:57 +00:00
msgid "On"
msgstr "Act"
2021-04-29 13:41:47 +00:00
# MSG_BACK c=18
#: messages.c:64
2021-01-26 10:08:57 +00:00
msgid "Back"
msgstr "atras"
2021-04-29 13:41:47 +00:00
# MSG_CHECKS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5641
2021-01-26 10:08:57 +00:00
msgid "Checks"
msgstr "Comprobaciones"
2021-04-29 13:41:47 +00:00
# MSG_FALSE_TRIGGERING c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8190
2021-01-26 10:08:57 +00:00
msgid "False triggering"
msgstr "Falsa activacion"
2021-04-29 13:41:47 +00:00
# MSG_STRICT c=8
#: messages.c:131
2021-01-26 10:08:57 +00:00
msgid "Strict"
msgstr "Estrict"
2021-04-29 13:41:47 +00:00
# MSG_WARN c=8
#: messages.c:130
2021-01-26 10:08:57 +00:00
msgid "Warn"
msgstr "Aviso"
# MSG_HW_SETUP c=18
2021-04-29 13:41:47 +00:00
#: messages.c:102
2021-01-26 10:08:57 +00:00
msgid "HW Setup"
msgstr "Configuracion HW"
2021-04-29 13:41:47 +00:00
# MSG_MAGNETS_COMP c=13
2021-01-26 10:08:57 +00:00
#: messages.c:150
msgid "Magnets comp."
msgstr "Comp. imanes"
2021-04-29 13:41:47 +00:00
# MSG_MESH c=12
2021-01-26 10:08:57 +00:00
#: messages.c:147
msgid "Mesh"
msgstr "Malla"
2021-04-29 13:41:47 +00:00
# MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
2021-12-16 10:52:35 +00:00
#: Marlin_main.cpp:875
2021-01-26 10:08:57 +00:00
msgid "MK3S firmware detected on MK3 printer"
msgstr "Firmware MK3S detectado en impresora MK3"
2021-04-29 13:41:47 +00:00
# MSG_MMU_MODE c=8
#: messages.c:137
2021-01-26 10:08:57 +00:00
msgid "MMU Mode"
msgstr "Modo MMU"
2021-04-29 13:41:47 +00:00
# MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:4366
2021-04-29 13:41:47 +00:00
msgid "Mode change in progress..."
2021-01-26 10:08:57 +00:00
msgstr "Cambio de modo progresando ..."
2021-04-29 13:41:47 +00:00
# MSG_MODEL c=8
#: messages.c:132
2021-01-26 10:08:57 +00:00
msgid "Model"
msgstr "Modelo"
2021-04-29 13:41:47 +00:00
# MSG_NOZZLE_DIAMETER c=10
#: messages.c:136
2021-01-26 10:08:57 +00:00
msgid "Nozzle d."
2021-04-29 13:41:47 +00:00
msgstr "D-boquilla"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_GCODE_DIFF_CONTINUE c=20 r=4
2021-12-16 10:52:35 +00:00
#: util.cpp:414
2021-01-26 10:08:57 +00:00
msgid "G-code sliced for a different level. Continue?"
msgstr "Codigo G laminado para un nivel diferente. ?Continuar?"
2021-04-29 13:41:47 +00:00
# MSG_GCODE_DIFF_CANCELLED c=20 r=7
2021-12-16 10:52:35 +00:00
#: util.cpp:420
2021-01-26 10:08:57 +00:00
msgid "G-code sliced for a different level. Please re-slice the model again. Print cancelled."
msgstr "Codigo G laminado para un nivel diferente. Por favor relamina el modelo de nuevo. Impresion cancelada."
# MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
2021-04-29 13:41:47 +00:00
#: messages.c:134
2021-01-26 10:08:57 +00:00
msgid "G-code sliced for a different printer type. Continue?"
msgstr "Codigo G laminado para un tipo de impresora diferente. ?Continuar?"
2021-04-29 13:41:47 +00:00
# MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
#: messages.c:135
2021-01-26 10:08:57 +00:00
msgid "G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
msgstr "Codigo G laminado para una impresora diferente. Por favor relamina el modelo de nuevo. Impresion cancelada."
2021-04-29 13:41:47 +00:00
# MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
2021-12-16 10:52:35 +00:00
#: util.cpp:381
2021-01-26 10:08:57 +00:00
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "Codigo G laminado para nuevo firmware. ?Continuar?"
2021-12-21 13:31:04 +00:00
# MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
2021-12-16 10:52:35 +00:00
#: util.cpp:387
2021-01-26 10:08:57 +00:00
msgid "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
msgstr "Codigo G laminado para nuevo firmware. Por favor actualiza el firmware. Impresion cancelada."
2021-04-29 13:41:47 +00:00
# MSG_PREHEATING_TO_CUT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2309
2021-01-26 10:08:57 +00:00
msgid "Preheating to cut"
msgstr "Precalent. laminar"
2021-04-29 13:41:47 +00:00
# MSG_PREHEATING_TO_EJECT c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2306
2021-01-26 10:08:57 +00:00
msgid "Preheating to eject"
msgstr "Precalent. expulsar"
2021-04-29 13:41:47 +00:00
# MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
2021-12-16 10:52:35 +00:00
#: util.cpp:294
2021-01-26 10:08:57 +00:00
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "Diametro nozzle impresora difiere de cod.G. ?Continuar?"
2021-04-29 13:41:47 +00:00
# MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
2021-12-16 10:52:35 +00:00
#: util.cpp:301
2021-01-26 10:08:57 +00:00
msgid "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
msgstr "Diametro nozzle Impresora difiere de cod.G. Comprueba los valores en ajustes. Impresion cancelada."
2021-04-29 13:41:47 +00:00
# MSG_SELFTEST_FS_LEVEL c=20
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:8195
2021-01-26 10:08:57 +00:00
msgid "%s level expected"
2021-04-29 13:41:47 +00:00
msgstr "%s nivel esperado"
2021-01-26 10:08:57 +00:00
2021-04-29 13:41:47 +00:00
# MSG_RENAME c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6579
2021-01-26 10:08:57 +00:00
msgid "Rename"
msgstr "Renombrar"
2021-04-29 13:41:47 +00:00
# MSG_SELECT c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:6572
2021-01-26 10:08:57 +00:00
msgid "Select"
msgstr "Seleccionar"
2021-04-29 13:41:47 +00:00
# MSG_INFO_SENSORS c=18
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:2041
2021-01-26 10:08:57 +00:00
msgid "Sensor info"
msgstr "Info sensor"
# MSG_SHEET c=10
2021-04-29 13:41:47 +00:00
#: messages.c:65
2021-01-26 10:08:57 +00:00
msgid "Sheet"
msgstr "Lamina"
2021-04-29 13:41:47 +00:00
# MSG_SOUND_BLIND c=7
2021-01-26 10:08:57 +00:00
#: messages.c:146
msgid "Assist"
2021-04-29 13:41:47 +00:00
msgstr "Asist."
2021-01-26 10:08:57 +00:00
# MSG_STEEL_SHEET c=18
2021-04-29 13:41:47 +00:00
#: messages.c:66
2021-01-26 10:08:57 +00:00
msgid "Steel sheets"
msgstr "Lamina de acero"
# MSG_Z_CORRECTION c=13
2021-12-16 10:52:35 +00:00
#: ultralcd.cpp:5088
2021-01-26 10:08:57 +00:00
msgid "Z-correct:"
msgstr "Corregir-Z:"
2021-04-29 13:41:47 +00:00
# MSG_Z_PROBE_NR c=14
2021-01-26 10:08:57 +00:00
#: messages.c:149
msgid "Z-probe nr."
msgstr "Z-sensor nr."
2021-12-21 13:31:04 +00:00
# MSG_PRINTER_IP c=18
#: ultralcd.cpp:2028
msgid "Printer IP Addr:"
msgstr "Dir. IP impresora:"
