Prusa-Firmware/Firmware/config.h

80 lines
2.8 KiB
C
Raw Normal View History

#ifndef _CONFIG_H
#define _CONFIG_H
#include "Configuration_prusa.h"
#include "pins.h"
#if (defined(VOLT_IR_PIN) && defined(IR_SENSOR))
# define IR_SENSOR_ANALOG
#endif
//ADC configuration
#ifndef IR_SENSOR_ANALOG
#define ADC_CHAN_MSK 0b0000001001011111 //used AD channels bit mask (0,1,2,3,4,6,9)
#define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
#define ADC_CHAN_CNT 7 //number of used channels)
#else //!IR_SENSOR_ANALOG
#define ADC_CHAN_MSK 0b0000001101011111 //used AD channels bit mask (0,1,2,3,4,6,8,9)
#define ADC_DIDR_MSK 0b0000001001011111 //AD channels DIDR mask (1 ~ disabled digital input)
#define ADC_CHAN_CNT 8 //number of used channels)
#endif //!IR_SENSOR_ANALOG
#define ADC_OVRSAMPL 16 //oversampling multiplier
#define ADC_CALLBACK adc_ready //callback function ()
2018-07-12 15:55:38 +00:00
//SWI2C configuration
//#define SWI2C_SDA 20 //SDA on P3
//#define SWI2C_SCL 21 //SCL on P3
#define SWI2C_A8
#define SWI2C_DEL 20 //2us clock delay
#define SWI2C_TMO 2048 //2048 cycles timeout
//PAT9125 configuration
2020-08-25 09:31:35 +00:00
//#define PAT9125_SWSPI // software SPI mode (incomplete)
#ifdef SWI2C_SCL
#define PAT9125_SWI2C // software I2C mode
#else
2020-08-25 09:31:35 +00:00
#define PAT9125_I2C // hardware I2C mode
#endif
#define PAT9125_I2C_ADDR 0x75 //ID=LO
//#define PAT9125_I2C_ADDR 0x79 //ID=HI
//#define PAT9125_I2C_ADDR 0x73 //ID=NC
#define PAT9125_XRES 0
#define PAT9125_YRES 240 // maximum resolution (5*X cpi)
#define PAT9124_YRES_MM (5*PAT9125_YRES/25.4) // counts per mm
//SM4 configuration
#define SM4_DEFDELAY 500 //default step delay [us]
//TMC2130 - Trinamic stepper driver
//pinout - hardcoded
//spi:
#define TMC2130_SPI_RATE 0 // fosc/4 = 4MHz
#define TMC2130_SPCR SPI_SPCR(TMC2130_SPI_RATE, 1, 1, 1, 0)
#define TMC2130_SPSR SPI_SPSR(TMC2130_SPI_RATE)
//LANG - Multi-language support
//#define LANG_MODE 0 // primary language only
#define LANG_MODE 1 // sec. language support
#define LANG_SIZE_RESERVED 0x3000 // reserved space for secondary language (12288 bytes)
//Community language support
#define COMMUNITY_LANG_NL // Community Dutch language
//#define COMMUNITY_LANG_QR // Community new language //..use this as a template and replace 'QR'
#if defined(COMMUNITY_LANG_NL) //|| defined(COMMUNITY_LANG_QR) //..use last part as a template and replace 'QR'
#define COMMUNITY_LANG_SUPPORT
#endif
// Sanity checks for correct configuration of XFLASH_DUMP options
#if defined(XFLASH_DUMP) && !defined(XFLASH)
#error "XFLASH_DUMP requires XFLASH support"
#endif
#if (defined(MENU_DUMP) || defined(EMERGENCY_DUMP)) && !defined(XFLASH_DUMP)
#error "MENU_DUMP and EMERGENCY_DUMP require XFLASH_DUMP"
#endif
#endif //_CONFIG_H