3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fd2d62dcd4
Prusa-Firmware/Firmware/Dcodes.h

62 lines
1.9 KiB
C
Raw Normal View History

Line endings to LF (./le.sh lf)
2017-10-03 11:01:59 +00:00
#ifndef DCODES_H
#define DCODES_H
Fsensor synchronization and triggering improved Watchdog implemented (4s interval, triggered from manage_heater) Stallguard sensitivity for XY decreased by 1 Extruder current adjusted to 5.5kg force Build number = 111
2017-11-24 20:53:35 +00:00
extern void dcode__1(); //D-1 - Endless loop (to simulate deadlock)
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107
2017-11-13 17:45:11 +00:00
extern void dcode_0(); //D0 - Reset
extern void dcode_1(); //D1 - Clear EEPROM
Allow D2 to be enabled selectively
2021-05-22 13:03:26 +00:00
#if defined DEBUG_DCODE2 || defined DEBUG_DCODES
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107
2017-11-13 17:45:11 +00:00
extern void dcode_2(); //D2 - Read/Write RAM
Allow D2 to be enabled selectively
2021-05-22 13:03:26 +00:00
#endif
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
Bugfix for last PR I forgot to change also the - `#ifdef DEBUG_DCODE_3` to `#if defined DEBUG_DCODE3 || defined DEBUG_DCODES` - `#ifdef DEBUG_DCODE_5` to `#if defined DEBUG_DCODE5 || defined DEBUG_DCODES` in the `Dcodes.h` file which I added to `Dcodes.cpp`. Due to this issue the "Debug" version fails during compiling. Sorry for that.
2020-04-07 09:22:48 +00:00
#if defined DEBUG_DCODE3 || defined DEBUG_DCODES
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107
2017-11-13 17:45:11 +00:00
extern void dcode_3(); //D3 - Read/Write EEPROM
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
#endif //DEBUG_DCODE3
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107
2017-11-13 17:45:11 +00:00
extern void dcode_4(); //D4 - Read/Write PIN
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
Bugfix for last PR I forgot to change also the - `#ifdef DEBUG_DCODE_3` to `#if defined DEBUG_DCODE3 || defined DEBUG_DCODES` - `#ifdef DEBUG_DCODE_5` to `#if defined DEBUG_DCODE5 || defined DEBUG_DCODES` in the `Dcodes.h` file which I added to `Dcodes.cpp`. Due to this issue the "Debug" version fails during compiling. Sorry for that.
2020-04-07 09:22:48 +00:00
#if defined DEBUG_DCODE5 || defined DEBUG_DCODES
SG_THR_X = 2, holding currents == running currents Farm preheat menu dcode D5 - read/write/erase FLASH dcode D6 - bootloader update test (for new stk500-prusa) _NO_ASM - MINGW simulator support fixed bug - "Fil. sensor [on/off]" menu Build number = 107
2017-11-13 17:45:11 +00:00
extern void dcode_5(); //D5 - Read/Write FLASH
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
#endif //DEBUG_DCODE5
D6: also hide declaration behind conditional
2021-06-07 16:50:45 +00:00
#if defined DEBUG_DCODE6 || defined DEBUG_DCODES
Build Number = 108 FSensor log can be enabled with D9125L1 Selftest menu PINDA D codes
2017-11-16 19:51:50 +00:00
extern void dcode_6(); //D6 - Read/Write external FLASH
D6: also hide declaration behind conditional
2021-06-07 16:50:45 +00:00
#endif
Build Number = 108 FSensor log can be enabled with D9125L1 Selftest menu PINDA D codes
2017-11-16 19:51:50 +00:00
extern void dcode_7(); //D7 - Read/Write Bootloader
extern void dcode_8(); //D8 - Read/Write PINDA
new module adc (analog2digital) temperature.cpp - adc sampling state machine removed new dcode D9 (adc read/write + simulator) temporarily DEBUG_DISABLE_STARTMSGS because UI blocked SILENT_MAX_FEEDRATE reduced to 172mm/s hexfile removed build number 137x
2017-12-20 12:42:20 +00:00
extern void dcode_9(); //D9 - Read/Write ADC (Write=enable simulated, Read=disable simulated)
Build Number = 108 FSensor log can be enabled with D9125L1 Selftest menu PINDA D codes
2017-11-16 19:51:50 +00:00
extern void dcode_10(); //D10 - XYZ calibration = OK
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
extern void dcode_12(); //D12 - Log time. Writes the current time in the log file.
Dcodes: add D20/D21/D22 to generate/read/clear dumps
2021-06-08 13:34:39 +00:00
#ifdef XFLASH_DUMP
extern void dcode_20(); //D20 - Generate an offline crash dump
extern void dcode_21(); //D21 - Print crash dump to serial
extern void dcode_22(); //D22 - Clear crash dump state
#endif
Implement an online crash dumper for MK2.5 boards When XFLASH is not available, allow users to request _online_ crash dumps by using D23 (since these require active user cooperation). Once enabled, instead of just rebooting, dump memory directly to the serial. As similarly done with EMERGENCY_DUMP, we have two features that can be enabled: EMERGENCY_SERIAL_DUMP: enables dumping on crash after being requested MENU_SERIAL_DUMP: allow triggering the same manually through the support menu.
2021-06-12 11:37:20 +00:00
#ifdef EMERGENCY_SERIAL_DUMP
#include "xflash_dump.h"
Improve/fix D23 for M2.5/S printers - Move D23 into it's own function inside Dcodes - Correctly include a break in the switch statement - Show the dumper status (enabled/disabled) after toggling - Allow to generate an immediate dump via g-code using D23 E for symmetry with D20 E
2021-06-24 15:35:55 +00:00
extern void dcode_23(); //D23 - Request/generate an online serial crash dump
extern bool emergency_serial_dump; //emergency dump enabled flag
xfdump: simplify stack debugging (sample pc+sp) Instead of having to guess the PC where the SP was sampled, always take both. This allows "seamless" stack decoding for both serial and xflash dumps, since we don't have to guess which function generated the dump. Make the core functions (doing the sampling) be ``noinline`` as well, so that they always have valid frame.
2021-06-16 21:58:00 +00:00
extern void serial_dump_and_reset(dump_crash_reason);
Implement an online crash dumper for MK2.5 boards When XFLASH is not available, allow users to request _online_ crash dumps by using D23 (since these require active user cooperation). Once enabled, instead of just rebooting, dump memory directly to the serial. As similarly done with EMERGENCY_DUMP, we have two features that can be enabled: EMERGENCY_SERIAL_DUMP: enables dumping on crash after being requested MENU_SERIAL_DUMP: allow triggering the same manually through the support menu.
2021-06-12 11:37:20 +00:00
#endif
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
#ifdef HEATBED_ANALYSIS
extern void dcode_80(); //D80 - Bed check. This command will log data to SD card file "mesh.txt".
extern void dcode_81(); //D81 - Bed analysis. This command will log data to SD card file "wldsd.txt".
#endif //HEATBED_ANALYSIS
extern void dcode_106(); //D106 - Print measured fan speed for different pwm values
PAT9125 - sampled only Y value, new debug code D9125. FSensor - synchronous sampling and new algorithm build number = 103
2017-10-24 17:45:15 +00:00
fix - conditional translation for DEBUG build
2018-02-08 17:56:15 +00:00
#ifdef TMC2130
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
extern void dcode_2130(); //D2130 - TMC2130
fix - conditional translation for DEBUG build
2018-02-08 17:56:15 +00:00
#endif //TMC2130
#ifdef PAT9125
Move few D-codes command from Marlin_main to Dcodes D80, D81 and D106 have been added to `Marlin_main.cpp` but all other D-codes moved to `Dcodes.cpp/.h`
2020-03-30 14:53:58 +00:00
extern void dcode_9125(); //D9125 - PAT9125
fix - conditional translation for DEBUG build
2018-02-08 17:56:15 +00:00
#endif //PAT9125
Line endings to LF (./le.sh lf)
2017-10-03 11:01:59 +00:00
#endif //DCODES_H
Reference in New Issue Copy Permalink